[U-Boot] [PATCH] mtd: atmel_nand: pmecc: fix bug fail to correct bit error in 1024-bytes sector
Josh Wu
josh.wu at atmel.com
Fri Aug 23 09:09:05 CEST 2013
The PMECC use BCH algorithm to correct error. In BCH algorithm, the
primitive polynomial value is GF(2^13) for 512-bytes sector size. And it is
GF(2^14) for 1024-bytes sector size.
This patch will choose correct degree of the remainders(13 or 14) for
different sector size.
Tested in AT91SAM9X5-EK with MLC nand flash.
More detail can be refered to section 5.4.1 of:
AT91SAM ARM-based Embedded MPU Application Note
<http://www.atmel.com/Images/doc11127.pdf>
Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
drivers/mtd/nand/atmel_nand.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 96aca00..da83f06 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -827,7 +827,8 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
switch (mtd->writesize) {
case 2048:
case 4096:
- host->pmecc_degree = PMECC_GF_DIMENSION_13;
+ host->pmecc_degree = (sector_size == 512) ?
+ PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
host->pmecc_sector_number = mtd->writesize / sector_size;
host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes(
--
1.7.9.5
More information about the U-Boot
mailing list