[U-Boot] can u-boot tools fw_{printenv, setenv} work with eMMC HW partition?

[Luka Perkov]

On Sat, Aug 24, 2013 at 12:01:25AM -0400, Robert P. J. Day wrote:
> On Sat, 24 Aug 2013, Luka Perkov wrote:
> > /dev/mmcblk0 0x60000 0x2000 0x2000
> 
>   ah, there's the misunderstanding. i thought we were discussing how
> to be able to refer *directly* to the eMMC partition "boot1", as in
> /dev/mmcblk1boot1. it looks like what you're describing would refer
> instead simply to /dev/mmcblk1, correct?

Even though the config is actually refering to /dev/mmcblk1 in fact it's
writing/reading to /dev/mmcblk1p1 (or /dev/mmcblk1boot1) in your case.
But you need to configure it properly for your MMC device.

Luka