[U-Boot] [PATCH v4 0/6] arm, am335x: add support for siemens boards
Tom Rini
trini at ti.com
Wed Aug 28 20:25:18 CEST 2013
On Mon, Aug 19, 2013 at 04:38:55PM +0200, Heiko Schocher wrote:
> add support for the am335x based boards from siemens:
>
> dxr2:
> - DDR3 128MiB
> - NAND 256MiB
> - Ethernet with external Switch SMSC LAN9303
> - no PMIC
> - internal Watchdog
> - DFU support
>
> pxm2:
> - DDR2 512 MiB
> - NAND 1024 MiB
> - PMIC
> - PHY atheros ar803x
> - USB Host
> - internal Watchdog
> - DFU support
>
> rut:
> - DDR3 256 MiB
> - NAND 256 MiB
> - PMIC
> - PHY natsemi dp83630
> - external Watchdog
> - DFU support
>
> Signed-off-by: Heiko Schocher <hs at denx.de>
> Signed-off-by: Roger Meier <r.meier at siemens.com>
> Signed-off-by: Samuel Egli <samuel.egli at siemens.com>
> Cc: Pascal Bach <pascal.bach at siemens.com>
> Cc: Tom Rini <trini at ti.com>
>
> - changes for v2:
> - add a more detailed comment, from where the files are based
> - add missing (C)
> - changes for v3:
> - rebased against u-boot-ti commit bb2a5d8f87fffb4fadfb205837decbd1b3e75f88
> - updated with lokeshs v2 patches
> - rebased arm, am33xx: add defines for gmii_sel_register bits
> patch, and therefore added to this patchserie
> - add bd_ram_ofs to cpsw_data in board code
> needed since commit 2bf36ac638ab2db9f0295aa47064976eeebf80c1
> - changes for v4:
> - rebased against u-boot-ti commit 425faf74cd8189c87919f7e72a0101c684ee3b9f
> therefore added define CONFIG_OMAP_COMMON
> - add video splash screen support
> Therefor needed patches (already applied to u-boot-video.git):
> [U-Boot,2/7] video, da8xx: move da8xx-fb.h to drivers/video
> http://patchwork.ozlabs.org/patch/264387/
> applied
> [U-Boot,3/7] arm, am33xx: add clk_get prototype
> http://patchwork.ozlabs.org/patch/264389/
> applied
> [U-Boot,4/7] video, da8xx-fb: changes for am335x usage
> http://patchwork.ozlabs.org/patch/264388/
> applied
> [U-Boot,5/7] video, da8xx-fb: show fb addr in bdinfo
> http://patchwork.ozlabs.org/patch/264392/
> applied
> [U-Boot,6/7] tools, bmp_logo: fix index from uint16_t to int to allow bigger logos
> http://patchwork.ozlabs.org/patch/264391/
> applied
> [U-Boot,7/7] video: add an option to skip cfb console init
> http://patchwork.ozlabs.org/patch/264390/
> applied
>
> for patch
> [U-Boot,1/7] arm, am335x: add some missing registers and defines for lcd and epwm support
> http://patchwork.ozlabs.org/patch/264386/
>
> are changes requested, so added this updated patch to
> this patchserie
>
> The bmp in u-boot:/tools/logos/siemens.bmp is used as logo.
> on the rut board:
> get "DISP1.name" from factoryset, and search it in the list of known
> displays. If found use this display, if not use display "KWH043ST20-F01"
> as default.
>
> - new patch needed for the rut board splash screen support:
> video: add formike lcd panel init
>
> - update list of needed patches
>
> Needed patches:
>
> - [U-Boot] arm, spl: add watchdog library to SPL
> http://patchwork.ozlabs.org/patch/248503/
> reposted with this patchserie
> - [U-Boot] arm, arm335x: add watchdog support
> http://patchwork.ozlabs.org/patch/248504/
> reposted with this patchserie
> - [U-Boot,v2] arm, am33xx: add defines for gmii_sel_register bits
> http://patchwork.ozlabs.org/patch/248916/
> added in v3 to this patchseries as rebased against u-boot-ti
> - [U-Boot,v5] dfu, nand, ubi: add partubi alt settings for updating ubi partition
> http://patchwork.ozlabs.org/patch/261583/
>
> Tested patches with this patch:
> - [U-Boot] dfu: Implementation of target reset after communication with dfu-util's -R switch
> http://patchwork.ozlabs.org/patch/260041/
> - [U-Boot] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
> http://patchwork.ozlabs.org/patch/253185/
>
> Heiko Schocher (6):
> arm, am33xx: add defines for gmii_sel_register bits
> arm, am335x: add some missing registers and defines for lcd and epwm
> support
> arm, spl: add watchdog library to SPL
> arm, am335x: add watchdog support
> video: add formike lcd panel init
> arm, am335x: add support for 3 siemens boards
>
> MAINTAINERS | 5 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 74 ++-
> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 7 +
> board/isee/igep0033/board.c | 6 +-
> board/phytec/pcm051/board.c | 2 -
> board/siemens/common/board.c | 171 +++++++
> board/siemens/common/factoryset.c | 284 ++++++++++++
> board/siemens/common/factoryset.h | 27 ++
> board/siemens/dxr2/Makefile | 49 ++
> board/siemens/dxr2/board.c | 241 ++++++++++
> board/siemens/dxr2/board.h | 69 +++
> board/siemens/dxr2/mux.c | 112 +++++
> board/siemens/pxm2/Makefile | 49 ++
> board/siemens/pxm2/board.c | 429 +++++++++++++++++
> board/siemens/pxm2/board.h | 22 +
> board/siemens/pxm2/mux.c | 186 ++++++++
> board/siemens/pxm2/pmic.h | 71 +++
> board/siemens/rut/Makefile | 49 ++
> board/siemens/rut/board.c | 432 +++++++++++++++++
> board/siemens/rut/board.h | 22 +
> board/siemens/rut/mux.c | 347 ++++++++++++++
> board/ti/am335x/board.c | 6 +-
> boards.cfg | 3 +
> doc/README.SPL | 2 +-
> drivers/video/Makefile | 1 +
> drivers/video/formike.c | 511 +++++++++++++++++++++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/omap_wdt.c | 121 +++++
> include/configs/dxr2.h | 94 ++++
> include/configs/pxm2.h | 153 ++++++
> include/configs/rut.h | 156 +++++++
> include/configs/siemens-am33x-common.h | 463 +++++++++++++++++++
> include/video.h | 4 +
> spl/Makefile | 1 +
> tools/logos/siemens.bmp | Bin 0 -> 25766 bytes
> 35 Dateien ge??ndert, 4157 Zeilen hinzugef??gt(+), 13 Zeilen entfernt(-)
> create mode 100644 board/siemens/common/board.c
> create mode 100644 board/siemens/common/factoryset.c
> create mode 100644 board/siemens/common/factoryset.h
> create mode 100644 board/siemens/dxr2/Makefile
> create mode 100644 board/siemens/dxr2/board.c
> create mode 100644 board/siemens/dxr2/board.h
> create mode 100644 board/siemens/dxr2/mux.c
> create mode 100644 board/siemens/pxm2/Makefile
> create mode 100644 board/siemens/pxm2/board.c
> create mode 100644 board/siemens/pxm2/board.h
> create mode 100644 board/siemens/pxm2/mux.c
> create mode 100644 board/siemens/pxm2/pmic.h
> create mode 100644 board/siemens/rut/Makefile
> create mode 100644 board/siemens/rut/board.c
> create mode 100644 board/siemens/rut/board.h
> create mode 100644 board/siemens/rut/mux.c
> create mode 100644 drivers/video/formike.c
> create mode 100644 drivers/watchdog/omap_wdt.c
> create mode 100644 include/configs/dxr2.h
> create mode 100644 include/configs/pxm2.h
> create mode 100644 include/configs/rut.h
> create mode 100644 include/configs/siemens-am33x-common.h
> create mode 100644 tools/logos/siemens.bmp
With the patch I sent to always build with CONFIG_OMAP_GPIO set (needed
for changes in master), this is applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130828/aa506887/attachment.pgp>
More information about the U-Boot
mailing list