[U-Boot] [PATCH 00/12] am33xx/omap5: Improve docs for customization

[Tom Rini]

On Tue, Aug 20, 2013 at 08:53:42AM -0400, Tom Rini wrote:

> Hey all,
> 
> The following series aims to make it easier to take the various ARMv7 TI
> reference platforms and use them as the base for a custom hardware
> project.  The main outputs here are some re-shuffling of the config
> headers to try and group things somewhat logically, expanding on
> comments to make it clear where some values come from and finally
> correcting a few values based on careful reading of the TRM.  The big
> change here is that we've changed where OMAP5/DRA7xx loads SPL to.
> Based on reading the TRM as well as testing DRA7xx with UART loading,
> we're moving the load address to the start of the ROM defined download
> area, and using another area for scratch space.
> 
> The series has been boot tested on am335x and omap5_uevm.

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130828/796496f3/attachment.pgp>