[U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM

[Tapani Utriainen]

Eric,


On Wed, 28 Aug 2013 16:26:44 +0200
Eric Bénard <eric at eukrea.com> wrote:

> Le Wed, 28 Aug 2013 19:23:33 +0800,
> Tapani <tapani at technexion.com> a écrit :
> 
> > 
> >     Add support for TechNexion edm-cf-imx6 SoM
> > 
> >     The edm1-cf-imx6 SoM comes in three variants, one with imx6 solo cpu,
> >     one with an imx6 dual lite cpu and one with an imx6 quad cpu.
> > 
> aren't these boards Wandboard without the MicroSD connector but with
> either a eMMC or a NAND ?

No.

While u-boot level edm-cf-imx6 is compatible with Wandboard, there are differences 
(some different pin definitions, different wifi chips, different board ids, 
different maintainers, ... ). Also there is going to be a edm2-cf-imx6 module, 
which we are hoping to be able to share code with instead.

However if someone wants to play with the SPL boot, a edm-cf-imx6 u-boot should 
work on a Wandboard (after changing machine id).

//Tapani