[U-Boot] [PATCH 4/5] ARM: mxs: Add Creative ZEN XFi3 board

Marek Vasut marex at denx.de
Sat Aug 31 15:53:45 CEST 2013


Add STMP3780-based XFi3 board. This board is a small PMP device
sporting a CPU which was later rebranded to i.MX233 . Currently
supported is USB gadget mode and both external SD and internal
Phison SD-NAND bridge .

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Stefano Babic <sbabic at denx.de>
---
 MAINTAINERS                    |    1 +
 board/creative/xfi3/Makefile   |   31 ++++++
 board/creative/xfi3/spl_boot.c |  134 ++++++++++++++++++++++++
 board/creative/xfi3/xfi3.c     |  224 ++++++++++++++++++++++++++++++++++++++++
 boards.cfg                     |    1 +
 include/configs/xfi3.h         |   69 +++++++++++++
 6 files changed, 460 insertions(+)
 create mode 100644 board/creative/xfi3/Makefile
 create mode 100644 board/creative/xfi3/spl_boot.c
 create mode 100644 board/creative/xfi3/xfi3.c
 create mode 100644 include/configs/xfi3.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 0a900dc..84c1f61 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -968,6 +968,7 @@ Marek Vasut <marek.vasut at gmail.com>
 	vpac270		xscale/pxa
 	zipitz2		xscale/pxa
 	mx23_olinuxino	i.MX23
+	xfi3		i.MX23
 	m28evk		i.MX28
 	sc_sps_1	i.MX28
 	m53evk		i.MX53
diff --git a/board/creative/xfi3/Makefile b/board/creative/xfi3/Makefile
new file mode 100644
index 0000000..4dc2b48
--- /dev/null
+++ b/board/creative/xfi3/Makefile
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+ifndef	CONFIG_SPL_BUILD
+COBJS	:= xfi3.o
+else
+COBJS	:= spl_boot.o
+endif
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/creative/xfi3/spl_boot.c b/board/creative/xfi3/spl_boot.c
new file mode 100644
index 0000000..af7aa0e
--- /dev/null
+++ b/board/creative/xfi3/spl_boot.c
@@ -0,0 +1,134 @@
+/*
+ * Creative ZEN X-Fi3 setup
+ *
+ * Copyright (C) 2013 Marek Vasut <marex at denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx23.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define	MUX_CONFIG_EMI	(MXS_PAD_1V8 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_SSP	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_LCD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+
+const iomux_cfg_t iomux_setup[] = {
+	/* EMI */
+	MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI,
+
+	MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
+
+	MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
+	MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+
+	MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_RESET__LCD_RESET | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_RS__LCD_RS | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_WR__LCD_WR | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
+
+	MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP,
+	MX23_PAD_SSP1_DETECT__GPIO_2_1 | MUX_CONFIG_SSP,
+	MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP,
+	MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP,
+	MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP,
+	MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP,
+	MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
+	MX23_PAD_GPMI_D07__GPIO_0_7 | MUX_CONFIG_SSP,
+
+	MX23_PAD_GPMI_D00__SSP2_DATA0 | MUX_CONFIG_SSP,
+	MX23_PAD_GPMI_D01__SSP2_DATA1 | MUX_CONFIG_SSP,
+	MX23_PAD_GPMI_D02__SSP2_DATA2 | MUX_CONFIG_SSP,
+	MX23_PAD_GPMI_D03__SSP2_DATA3 | MUX_CONFIG_SSP,
+	MX23_PAD_GPMI_RDY1__SSP2_CMD | MUX_CONFIG_SSP,
+	MX23_PAD_GPMI_WRN__SSP2_SCK | MUX_CONFIG_SSP,
+
+	/* PWM -- FIXME */
+	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP,
+};
+
+void mxs_adjust_memory_params(uint32_t *dram_vals)
+{
+	/* mDDR configuration values */
+	const uint32_t regs[] = {
+		0x01010001, 0x00010000, 0x01000000, 0x00000001,
+		0x00010101, 0x00000001, 0x00010000, 0x01000001,
+		0x01010000, 0x00000001, 0x07000200, 0x04070203,
+		0x02020002, 0x06070a02, 0x0d000201, 0x0305000d,
+		0x02080800, 0x19330f0a, 0x1f1f1c00, 0x020a1313,
+		0x03061323, 0x0000000a, 0x00080008, 0x00200020,
+		0x00200020, 0x00200020, 0x000003f7, 0x00000000,
+		0x00000000, 0x00000000, 0x00000020, 0x00000000,
+		0x001023cd, 0x20410010, 0x00006665, 0x00000000,
+		0x00000101, 0x00000001, 0x00000000, 0x00000000,
+	};
+	memcpy(dram_vals, regs, sizeof(regs));
+}
+
+void board_init_ll(const uint32_t arg, const uint32_t *resptr)
+{
+	mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
+}
diff --git a/board/creative/xfi3/xfi3.c b/board/creative/xfi3/xfi3.c
new file mode 100644
index 0000000..d90dfae
--- /dev/null
+++ b/board/creative/xfi3/xfi3.c
@@ -0,0 +1,224 @@
+/*
+ * Creative ZEN X-Fi3 board
+ *
+ * Copyright (C) 2013 Marek Vasut <marex at denx.de>
+ *
+ * Hardware investigation done by:
+ *
+ * Amaury Pouly <amaury.pouly at gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx23.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+	/* IO0 clock at 480MHz */
+	mxs_set_ioclk(MXC_IOCLK0, 480000);
+
+	/* SSP0 clock at 96MHz */
+	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	return mxs_dram_init();
+}
+
+#ifdef	CONFIG_CMD_MMC
+static int xfi3_mmc_cd(int id)
+{
+	switch (id) {
+	case 0:
+		/* The SSP_DETECT is inverted on this board. */
+		return gpio_get_value(MX23_PAD_SSP1_DETECT__GPIO_2_1);
+	case 1:
+		/* Phison bridge always present */
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+
+	/* MicroSD slot */
+	gpio_direction_input(MX23_PAD_SSP1_DETECT__GPIO_2_1);
+	gpio_direction_output(MX23_PAD_GPMI_D07__GPIO_0_7, 0);
+	ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd);
+	if (ret)
+		return ret;
+
+	/* Phison SD-NAND bridge */
+	ret = mxsmmc_initialize(bis, 1, NULL, xfi3_mmc_cd);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_VIDEO_MXS
+static int mxsfb_write_byte(uint32_t payload, const unsigned int data)
+{
+	struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
+	const unsigned int timeout = 0x10000;
+
+	if (mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
+			      timeout))
+		return -ETIMEDOUT;
+
+	writel((1 << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) |
+		(1 << LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET),
+		&regs->hw_lcdif_transfer_count);
+
+	writel(LCDIF_CTRL_DATA_SELECT | LCDIF_CTRL_RUN,
+		&regs->hw_lcdif_ctrl_clr);
+
+	if (data)
+		writel(LCDIF_CTRL_DATA_SELECT, &regs->hw_lcdif_ctrl_set);
+
+	writel(LCDIF_CTRL_RUN, &regs->hw_lcdif_ctrl_set);
+
+	if (mxs_wait_mask_clr(&regs->hw_lcdif_lcdif_stat_reg, 1 << 29,
+			      timeout))
+		return -ETIMEDOUT;
+
+	writel(payload, &regs->hw_lcdif_data);
+	return mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
+				 timeout);
+}
+
+static void mxsfb_write_register(uint32_t reg, uint32_t data)
+{
+	mxsfb_write_byte(reg, 0);
+	mxsfb_write_byte(data, 1);
+}
+
+static const struct {
+	uint8_t		reg;
+	uint8_t		delay;
+	uint16_t	val;
+} lcd_regs[] = {
+	{ 0x01, 0,  0x001c },
+	{ 0x02, 0,  0x0100 },
+	/* Writing 0x30 to reg. 0x03 flips the LCD */
+	{ 0x03, 0,  0x1038 },
+	{ 0x08, 0,  0x0808 },
+	/* This can contain 0x111 to rotate the LCD. */
+	{ 0x0c, 0,  0x0000 },
+	{ 0x0f, 0,  0x0c01 },
+	{ 0x20, 0,  0x0000 },
+	{ 0x21, 30, 0x0000 },
+	/* Wait 30 mS here */
+	{ 0x10, 0,  0x0a00 },
+	{ 0x11, 30, 0x1038 },
+	/* Wait 30 mS here */
+	{ 0x12, 0,  0x1010 },
+	{ 0x13, 0,  0x0050 },
+	{ 0x14, 0,  0x4f58 },
+	{ 0x30, 0,  0x0000 },
+	{ 0x31, 0,  0x00db },
+	{ 0x32, 0,  0x0000 },
+	{ 0x33, 0,  0x0000 },
+	{ 0x34, 0,  0x00db },
+	{ 0x35, 0,  0x0000 },
+	{ 0x36, 0,  0x00af },
+	{ 0x37, 0,  0x0000 },
+	{ 0x38, 0,  0x00db },
+	{ 0x39, 0,  0x0000 },
+	{ 0x50, 0,  0x0000 },
+	{ 0x51, 0,  0x0705 },
+	{ 0x52, 0,  0x0e0a },
+	{ 0x53, 0,  0x0300 },
+	{ 0x54, 0,  0x0a0e },
+	{ 0x55, 0,  0x0507 },
+	{ 0x56, 0,  0x0000 },
+	{ 0x57, 0,  0x0003 },
+	{ 0x58, 0,  0x090a },
+	{ 0x59, 30, 0x0a09 },
+	/* Wait 30 mS here */
+	{ 0x07, 30, 0x1017 },
+	/* Wait 40 mS here */
+	{ 0x36, 0,  0x00af },
+	{ 0x37, 0,  0x0000 },
+	{ 0x38, 0,  0x00db },
+	{ 0x39, 0,  0x0000 },
+	{ 0x20, 0,  0x0000 },
+	{ 0x21, 0,  0x0000 },
+};
+
+void board_mxsfb_system_setup(void)
+{
+	struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
+	int i;
+
+	/* Switch the LCDIF into System-Mode */
+	writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DOTCLK_MODE |
+		LCDIF_CTRL_BYPASS_COUNT, &regs->hw_lcdif_ctrl_clr);
+
+	/* Restart the SmartLCD controller */
+	mdelay(50);
+	writel(1, &regs->hw_lcdif_ctrl1_set);
+	mdelay(50);
+	writel(1, &regs->hw_lcdif_ctrl1_clr);
+	mdelay(50);
+	writel(1, &regs->hw_lcdif_ctrl1_set);
+	mdelay(50);
+
+	/* Program the SmartLCD controller */
+	writel(LCDIF_CTRL1_RECOVER_ON_UNDERFLOW, &regs->hw_lcdif_ctrl1_set);
+
+	writel((0x03 << LCDIF_TIMING_CMD_HOLD_OFFSET) |
+	       (0x03 << LCDIF_TIMING_CMD_SETUP_OFFSET) |
+	       (0x03 << LCDIF_TIMING_DATA_HOLD_OFFSET) |
+	       (0x02 << LCDIF_TIMING_DATA_SETUP_OFFSET),
+	       &regs->hw_lcdif_timing);
+
+	/*
+	 * OTM2201A init and configuration sequence.
+	 */
+	for (i = 0; i < ARRAY_SIZE(lcd_regs); i++) {
+		mxsfb_write_register(lcd_regs[i].reg, lcd_regs[i].val);
+		if (lcd_regs[i].delay)
+			mdelay(lcd_regs[i].delay);
+	}
+	/* Turn on Framebuffer Upload Mode */
+	mxsfb_write_byte(0x22, 0);
+
+	writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DATA_SELECT,
+		&regs->hw_lcdif_ctrl_set);
+}
+#endif
+
+int board_init(void)
+{
+	/* Adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	/* Turn on PWM backlight */
+	gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index 5f961da..c951633 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -205,6 +205,7 @@ mx28evk                      arm         arm926ejs   mx28evk             freesca
 mx28evk_nand                 arm         arm926ejs   mx28evk             freescale      mxs		mx28evk:ENV_IS_IN_NAND
 mx28evk_auart_console        arm         arm926ejs   mx28evk             freescale      mxs		mx28evk:MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC
 sc_sps_1                     arm         arm926ejs   sc_sps_1            schulercontrol mxs
+xfi3                         arm         arm926ejs   xfi3                creative       mxs		xfi3
 nhk8815                      arm         arm926ejs   nhk8815             st             nomadik
 nhk8815_onenand              arm         arm926ejs   nhk8815             st             nomadik       nhk8815:BOOT_ONENAND
 omap5912osk                  arm         arm926ejs   -                   ti             omap
diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h
new file mode 100644
index 0000000..022bc95
--- /dev/null
+++ b/include/configs/xfi3.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex at denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef __CONFIGS_XFI3_H__
+#define __CONFIGS_XFI3_H__
+
+/* System configurations */
+#define CONFIG_MX23				/* i.MX23 SoC */
+
+/* U-Boot Commands */
+#define CONFIG_SYS_NO_FLASH
+#include <config_cmd_default.h>
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_VIDEO
+
+/* Memory configuration */
+#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define PHYS_SDRAM_1			0x40000000	/* Base address */
+#define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+
+/* Environment */
+#define CONFIG_ENV_SIZE			(16 * 1024)
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_OVERWRITE
+
+/* Booting Linux */
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
+#define CONFIG_LOADADDR		0x42000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+
+/* LCD */
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_FONT_4X6
+#define CONFIG_VIDEO_MXS_MODE_SYSTEM
+#define CONFIG_SYS_BLACK_IN_WRITE
+#define LCD_BPP	LCD_COLOR16
+#endif
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+
+#define CONFIG_MV_UDC		/* ChipIdea CI13xxx UDC */
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_CDC
+#define CONFIG_NETCONSOLE
+#endif
+
+/* The rest of the configuration is shared */
+#include <configs/mxs.h>
+
+#endif	/* __CONFIGS_XFI3_H__ */
-- 
1.7.10.4



More information about the U-Boot mailing list