[U-Boot] [PATCH RFC 18/22] i.MX6: MX6Q: update ETHERNET/OCOTP declarations to match MX6DL

[Eric Nelson]

Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
---
 arch/arm/include/asm/arch-mx6/mx6q_pins.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
index 28e841a..84d3bd9 100644
--- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -1027,7 +1027,7 @@ enum {
 	MX6_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1	= IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0),
 	MX6_PAD_GPIO_4__GPIO_1_4		= IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0),
 	MX6_PAD_GPIO_4__USDHC2_CD		= IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0),
-	MX6_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO_4__OCOTP_CTRL_WRAPPER_FUSE_LATCHED = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0),
 	MX6_PAD_GPIO_5__ESAI1_TX2_RX3		= IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0),
 	MX6_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4	= IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0),
 	MX6_PAD_GPIO_5__KPP_ROW_7		= IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0),
@@ -1055,7 +1055,7 @@ enum {
 	MX6_PAD_GPIO_8__USBOH3_OTGUSB_PWRCTL_WAKEUP	= IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0),
 	MX6_PAD_GPIO_16__ESAI1_TX3_RX2		= IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0),
 	MX6_PAD_GPIO_16__ENET_1588_EVENT2_IN	= IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0),
-	MX6_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0),
+	MX6_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0),
 	MX6_PAD_GPIO_16__USDHC1_LCTL		= IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0),
 	MX6_PAD_GPIO_16__SPDIF_IN1		= IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0),
 	MX6_PAD_GPIO_16__GPIO_7_11		= IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0),
-- 
1.8.1.2