[U-Boot] [PATCH v2 05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON

Gabor Juhos juhosg at openwrt.org
Sat Feb 2 17:06:01 CET 2013


Move the GT64120 register base to 0x1be00000
and setup PCI BAR registers as done by the
original YAMON bootloader.

This is needed for running Linux kernel.

Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>
---
Changes since v1:
 - rebased against mips/testing

Changes since RFC: ---
---
 arch/mips/include/asm/malta.h    |    4 ++-
 board/qemu-malta/lowlevel_init.S |   51 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/malta.h b/arch/mips/include/asm/malta.h
index ab951e6..d4d44a2 100644
--- a/arch/mips/include/asm/malta.h
+++ b/arch/mips/include/asm/malta.h
@@ -9,10 +9,12 @@
 #ifndef _MIPS_ASM_MALTA_H
 #define _MIPS_ASM_MALTA_H
 
-#define MALTA_IO_PORT_BASE	0x10000000
+#define MALTA_IO_PORT_BASE	0x18000000
 
 #define MALTA_UART_BASE		(MALTA_IO_PORT_BASE + 0x3f8)
 
+#define MALTA_GT_BASE		0x1be00000
+
 #define MALTA_RESET_BASE	0x1f000500
 #define GORESET			0x42
 
diff --git a/board/qemu-malta/lowlevel_init.S b/board/qemu-malta/lowlevel_init.S
index c5c5bd9..11544a8 100644
--- a/board/qemu-malta/lowlevel_init.S
+++ b/board/qemu-malta/lowlevel_init.S
@@ -6,7 +6,19 @@
  * by the Free Software Foundation.
  */
 
+#include <config.h>
+#include <asm/addrspace.h>
 #include <asm/regdef.h>
+#include <asm/gt64120.h>
+#include <asm/malta.h>
+
+#ifdef CONFIG_SYS_BIG_ENDIAN
+#define CPU_TO_GT32(_x)		((_x))
+#else
+#define CPU_TO_GT32(_x) (					\
+	(((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) |	\
+	(((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
+#endif
 
 	.text
 	.set noreorder
@@ -15,5 +27,44 @@
 	.globl	lowlevel_init
 lowlevel_init:
 
+	/*
+	 * Load BAR registers of GT64120 as done by YAMON
+	 *
+	 * based on a patch sent by Antony Pavlov <antonynpavlov at gmail.com>
+	 * to the barebox mailing list.
+	 * The subject of the original patch:
+	 *   'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
+	 * URL:
+	 * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
+	 *
+	 * based on write_bootloader() in qemu.git/hw/mips_malta.c
+	 * see GT64120 manual and qemu.git/hw/gt64xxx.c for details
+	 */
+
+	/* move GT64120 registers from 0x14000000 to 0x1be00000 */
+	li	t1, KSEG1ADDR(GT_DEF_BASE)
+	li	t0, CPU_TO_GT32(0xdf000000)
+	sw	t0, GT_ISD_OFS(t1)
+
+	/* setup MEM-to-PCI0 mapping */
+	li	t1, KSEG1ADDR(MALTA_GT_BASE)
+
+	/* setup PCI0 io window to 0x18000000-0x181fffff */
+	li	t0, CPU_TO_GT32(0xc0000000)
+	sw	t0, GT_PCI0IOLD_OFS(t1)
+	li	t0, CPU_TO_GT32(0x40000000)
+	sw	t0, GT_PCI0IOHD_OFS(t1)
+
+	/* setup PCI0 mem windows */
+	li	t0, CPU_TO_GT32(0x80000000)
+	sw	t0, GT_PCI0M0LD_OFS(t1)
+	li	t0, CPU_TO_GT32(0x3f000000)
+	sw	t0, GT_PCI0M0HD_OFS(t1)
+
+	li	t0, CPU_TO_GT32(0xc1000000)
+	sw	t0, GT_PCI0M1LD_OFS(t1)
+	li	t0, CPU_TO_GT32(0x5e000000)
+	sw	t0, GT_PCI0M1HD_OFS(t1)
+
 	jr	ra
 	 nop
-- 
1.7.10



More information about the U-Boot mailing list