[U-Boot] U-Boot Bug with newer GCC
Marek Vasut
marex at denx.de
Sat Feb 2 17:50:38 CET 2013
Dear Heiko Schocher,
> Hello Jeroen,
>
> On 02.02.2013 16:43, Jeroen Hofstee wrote:
> > Hello Heiko,
> >
> > On 02/02/2013 11:18 AM, Jeroen Hofstee wrote:
> >> Hello,
> >>
> >> On 02/02/2013 09:37 AM, Heiko Schocher wrote:
> >>> Hello Wolfgang, Sebastian,
> >>>
> >>> On 01.02.2013 12:31, Wolfgang Denk wrote:
> >>>> In message
> >>>> <E70AF999396FDF4EAE40E195B847096109F5D3A9 at SRVEXCH-2K10.CADCON.INTERN>
> >>>> you
> >>>>
> >>>> wrote:
> >>>>> we are using u-boot in our embedded system with arm-1136jfs cpu.
> >>>>
> >>>> Which exact system / board configuration is this?
> >>>>
> >>>> And which exact U-Boot version (git commit ID ?) is it?
> >>>>
> >>>>> We recently tried a new toolchain with GCC 4.7.2.
> >>>>> If compiled with the new toolchain the feature CONFIG_AUTO_COMPLETE
> >>>>> isn't working.
> >>>>
> >>>> We have been using GCC 4.7.2 for several months now, on many systems.
> >>>> No such problems have been reported before, so I speculate if this is
> >>>> really a problem with mainline code?
> >>>
> >>> Sebastian wrote On 01.02.2013 08:55:
> >>>> we are using u-boot in our embedded system with arm-1136jfs cpu.
> >>>> We recently tried a new toolchain with GCC 4.7.2.
> >>>> If compiled with the new toolchain the feature CONFIG_AUTO_COMPLETE
> >>>> isn't working.
> >>>> U-Boot start normally and on hitting TAB the system freezes.
> >>>> I tracked the problem down the variables __u_boot_cmd_start and
> >>>> __u_boot_cmd_end. Both are not valid with the new toolchain. And
> >>>> accessing one results in a system freeze.
> >>>> Probably the is a problem in arch/arm/cpu/u-boot.lds. I really bad
> >>>> at linker scripts.
> >>>
> >>> I just see some problems with ll_entry_* functions described in my
> >>> post here:
> >>> http://lists.denx.de/pipermail/u-boot/2013-February/145711.html
> >>>
> >>> I do not know, if this is the same problem, as I face problems only
> >>> before relocation, after relocation all works fine ...
> >>>
> >>> In this thread Marek wrote, that for this problem albert has
> >>> a solution ... (CCed albert and marek)
> >>>
> >>> Albert? Can you help here?
> >>
> >> I am tempted to think that is unrelated. First of all since you
> >> encounter problems with the 4.6 toolchain. This trap is not present
> >> when
> >> compiling with a 4.6 version (at least not for me).
> >>
> >> Second, because I bothered Marex and Albert already with this
> >> problem on irc and they concluded it could not be ll related.
> >>
> >> Third, because dumping the array of commands to a console,
> >> displays them all correctly.
> >
> > For completeness, the third statement is wrong. It is only the case
> > for the working version, the table has incorrect values for
> > cmdtp->name in current master. So lets hope it is the same problem.
> > I will wait for Albert his patch and check again. Thanks for the pointer.
>
> Thanks for the info!
> In the meantime, I also tried with ELDK-5.3 and see the same
> issue (_u_boot_list_try__start is 0 before relocation).
It must be NULL before reloc. Albert rolled out a patch in [1], please give it a
go. I believe Albert will be sending a followup RFC patch to the ML shortly.
[1] http://git.denx.de/?p=u-boot/u-boot-arm.git;a=shortlog;h=refs/heads/fix-
linker-lists
Best regards,
Marek Vasut
More information about the U-Boot
mailing list