[U-Boot] [PATCH V2 3/5] ARM: OMAP5: clocks: Add OPP settings required for OMAP543X ES2.0 soc
R Sricharan
r.sricharan at ti.com
Tue Feb 5 13:02:20 CET 2013
Hi Nishanth,
On Tuesday 05 February 2013 01:46 AM, Nishanth Menon wrote:
> On 19:59-20130204, R Sricharan wrote:
>> Change OPP settings as per the latest 0.4 version of
>> addendum for OMAP5430 ES2.0
> -->please be clear that these are for OPP_NOM. FYI, latest documentation
> is 0.5 rev which was released in Jan, considering this patch was send in
> Feb, might be good to cross verify any updates.
>
Thanks for the info, i was not aware of 0.5 version. I will recheck
if something is different here.
> in addition, I suspect TRM was referred for certain DPLLs as well?
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
>> Signed-off-by: R Sricharan <r.sricharan at ti.com>
>> ---
>> arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +
>> arch/arm/cpu/armv7/omap4/hw_data.c | 142 +++++++-------
>> arch/arm/cpu/armv7/omap5/hw_data.c | 242 +++++++++++++++---------
>> arch/arm/include/asm/arch-omap5/clocks.h | 4 +
>> arch/arm/include/asm/omap_common.h | 6 +-
>> 5 files changed, 241 insertions(+), 157 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
>> index 88e5336..164253c 100644
>> --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
>> +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
>> @@ -103,10 +103,14 @@ void setup_post_dividers(u32 const base, const struct dpll_params *params)
>> writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll);
>> if (params->m7_h14 >= 0)
>> writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll);
>> + if (params->h21 >= 0)
>> + writel(params->h21, &dpll_regs->cm_div_h21_dpll);
>> if (params->h22 >= 0)
>> writel(params->h22, &dpll_regs->cm_div_h22_dpll);
>> if (params->h23 >= 0)
>> writel(params->h23, &dpll_regs->cm_div_h23_dpll);
>> + if (params->h24 >= 0)
>> + writel(params->h24, &dpll_regs->cm_div_h24_dpll);
>> }
>>
>> static inline void do_bypass_dpll(u32 const base)
>> diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
>> index 892d016..b01bf5d 100644
>> --- a/arch/arm/cpu/armv7/omap4/hw_data.c
>> +++ b/arch/arm/cpu/armv7/omap4/hw_data.c
>> @@ -51,113 +51,113 @@ struct omap_sys_ctrl_regs const **ctrl =
>>
>> /* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */
> this: equivalent to OPP_SB?
>> static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
>> - {175, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {700, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {125, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {401, 10, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {350, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {700, 26, 1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {638, 34, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> /* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
> Do we even support this? there is no OPP Turbo for OMAP5, we have
> OPP_HIGH which needs DCC and AVS etc..
>> static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
>> - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {800, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {619, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {125, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {800, 26, 1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {125, 5, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> /* dpll locked at 1200 MHz - MPU clk at 600 MHz */
> Please correct this.
>> static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
>> - {50, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {600, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {250, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {125, 3, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {300, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {200, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {125, 7, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
> Follow on question: if we are dropping ES1.0 support entirely - we
> should drop it's support in id detection as well! ES1.0 and ES2.0 DPLL
> configurations are different unfortunately.
>> + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
> OPP_LOW is not supported on OMAP5 es2.0? Supported core DPLL locked frequency is
> 2127.36MHz?
>> - {200, 2, 1, 5, 8, 4, 6, 5, -1, -1}, /* 12 MHz */
>> - {800, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 13 MHz */
>> - {619, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 16.8 MHz */
>> - {125, 2, 1, 5, 8, 4, 6, 5, -1, -1}, /* 19.2 MHz */
>> - {400, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 26 MHz */
>> - {800, 26, 1, 5, 8, 4, 6, 5, -1, -1}, /* 27 MHz */
>> - {125, 5, 1, 5, 8, 4, 6, 5, -1, -1} /* 38.4 MHz */
>> + {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
>> + {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
>> + {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
>> + {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
>> + {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
>> - {127, 1, 1, 5, 8, 4, 6, 5, -1, -1}, /* 12 MHz */
>> - {762, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 13 MHz */
>> - {635, 13, 1, 5, 8, 4, 6, 5, -1, -1}, /* 16.8 MHz */
>> - {635, 15, 1, 5, 8, 4, 6, 5, -1, -1}, /* 19.2 MHz */
>> - {381, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 26 MHz */
>> - {254, 8, 1, 5, 8, 4, 6, 5, -1, -1}, /* 27 MHz */
>> - {496, 24, 1, 5, 8, 4, 6, 5, -1, -1} /* 38.4 MHz */
>> + {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
>> + {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
>> + {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
>> + {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
>> + {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
Answering all of your above questions here.
The above data is for OMAP4 and not OMAP5. This file was modified
here just to include dummy dividers. Because we were now using a
common dpll_params structure, there was no functional change in this
file. I think the problem was commit log was missing this info.
I will update to clarify this.
>> static const struct dpll_params
>> core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
> dumb question: what is running at 1600MHz?
DPLL_CORE is locked at 1600 MHz in OMAP4
>> - {200, 2, 2, 5, 8, 4, 6, 5, -1, -1}, /* 12 MHz */
>> - {800, 12, 2, 5, 8, 4, 6, 5, -1, -1}, /* 13 MHz */
>> - {619, 12, 2, 5, 8, 4, 6, 5, -1, -1}, /* 16.8 MHz */
>> - {125, 2, 2, 5, 8, 4, 6, 5, -1, -1}, /* 19.2 MHz */
>> - {400, 12, 2, 5, 8, 4, 6, 5, -1, -1}, /* 26 MHz */
>> - {800, 26, 2, 5, 8, 4, 6, 5, -1, -1}, /* 27 MHz */
>> - {125, 5, 2, 5, 8, 4, 6, 5, -1, -1} /* 38.4 MHz */
>> + {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
>> + {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
>> + {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
>> + {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
>> + {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
> not sure about these frequencies if verified for ES2.0
Again this is OMAP4 frequency
>> - {64, 0, 8, 6, 12, 9, 4, 5, -1, -1}, /* 12 MHz */
>> - {768, 12, 8, 6, 12, 9, 4, 5, -1, -1}, /* 13 MHz */
>> - {320, 6, 8, 6, 12, 9, 4, 5, -1, -1}, /* 16.8 MHz */
>> - {40, 0, 8, 6, 12, 9, 4, 5, -1, -1}, /* 19.2 MHz */
>> - {384, 12, 8, 6, 12, 9, 4, 5, -1, -1}, /* 26 MHz */
>> - {256, 8, 8, 6, 12, 9, 4, 5, -1, -1}, /* 27 MHz */
>> - {20, 0, 8, 6, 12, 9, 4, 5, -1, -1} /* 38.4 MHz */
>> + {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */
>> + {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */
>> + {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */
>> + {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */
>> + {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
> I might be mistaken, but i think the frequencies need an update?
>> - {931, 11, -1, -1, 4, 7, -1, -1, -1, -1}, /* 12 MHz */
>> - {931, 12, -1, -1, 4, 7, -1, -1, -1, -1}, /* 13 MHz */
>> - {665, 11, -1, -1, 4, 7, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {727, 14, -1, -1, 4, 7, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {931, 25, -1, -1, 4, 7, -1, -1, -1, -1}, /* 26 MHz */
>> - {931, 26, -1, -1, 4, 7, -1, -1, -1, -1}, /* 27 MHz */
>> - {291, 11, -1, -1, 4, 7, -1, -1, -1, -1} /* 38.4 MHz */
>> + {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> /* ABE M & N values with sys_clk as source */
>> static const struct dpll_params
>> abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
>> - {49, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {68, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {29, 7, 1, 1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> /* ABE M & N values with 32K clock as source */
>> static const struct dpll_params abe_dpll_params_32k_196608khz = {
> We do not intend to support 32K ABE source except when doing DPLL
> cascading - so this is in effect an configuration which is
> un-used in any s/w line.
1) In fact we not locking ABE, IVA, USB DPLLs any more in bootloader
unless some one enable a CLOCKS_ENABLE_ALL config.
But we still have there data, so that we can quickly experiment
when needed.
2) I remember that locking with 32K source was considered better
because, we can cut sys_clk when audio is still running.
Also i think that the jitter was not a real problem for audio
even when running with 32Khz clock. I have to check this point
again.
The reason we had both the sources supported was just from an
experiment motive. I have seen that during pre silicon, we have
to switch the clock source from default to get locking. So having
support for both helps in those cases.
>> - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1
>> + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
>> };
>>
>> static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
>> - {80, 0, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {960, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {50, 0, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {320, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {25, 0, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> struct dplls omap4430_dplls_es1 = {
>> diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
>> index e319dc5..13ea07e 100644
>> --- a/arch/arm/cpu/armv7/omap5/hw_data.c
>> +++ b/arch/arm/cpu/armv7/omap5/hw_data.c
>> @@ -44,134 +44,177 @@ struct omap_sys_ctrl_regs const **ctrl =
>> (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL;
>>
>> static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
> I am not sure we'd like to do this.
This file is common for ES1.0 as well. Also i have added frequency
tables for OPP_HIGH and OPP_LOW as well. We some times find it
nessecary to boot with a different than OPP_NOM to do experiments.
So this is useful from that point. But what is missing is the VDDs
which I usually add manually while testing. But now to complete
this, i will add that as well.
>> - {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = {
> again, frequency is wrong for es2.0?
This file is common for ES1.0 as well.
>> - {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {500, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {625, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
> again, frequency is wrong for es2.0?
MPU runs at 1100 MHZ in OPP_NOM on 2.0
>> - {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
> again, frequency is wrong for es2.0?
MPU runs at 800 MHZ in OPP_NOM on 1.0
>> - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {375, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {375, 17, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
> again, frequency is wrong for es2.0?
MPU runs at 400 MHZ in OPP_LOW on 1.0
>> - {200, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {375, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {400, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {375, 17, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = {
>> - {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {275, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {550, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params
>> core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
>> - {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */
>> - {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */
>> - {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */
>> + {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {570, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */
>> + {665, 11, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */
>> + {532, 12, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {665, 23, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */
>> +};
>> +
>> +static const struct dpll_params
>> + core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = {
>> + {266, 2, 2, 5, 8, 4, 62, 5, 6, 5, 7, 6}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {443, 6, 2, 5, 8, 4, 62, 5, 6, 5, 7, 6}, /* 16.8 MHz */
>> + {277, 4, 2, 5, 8, 4, 62, 5, 6, 5, 7, 6}, /* 19.2 MHz */
>> + {368, 8, 2, 5, 8, 4, 62, 5, 6, 5, 7, 6}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {277, 9, 2, 5, 8, 4, 62, 5, 6, 5, 7, 6} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params
>> core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
>> - {266, 2, 4, 5, 8, 8, 62, 10, 10, 14}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {570, 8, 4, 5, 8, 8, 62, 10, 10, 14}, /* 16.8 MHz */
>> - {665, 11, 4, 5, 8, 8, 62, 10, 10, 14}, /* 19.2 MHz */
>> - {532, 12, 4, 8, 8, 8, 62, 10, 10, 14}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {665, 23, 4, 8, 8, 8, 62, 10, 10, 14} /* 38.4 MHz */
>> + {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {570, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */
>> + {665, 11, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */
>> + {532, 12, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {665, 23, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */
>> +};
>> +
>> +static const struct dpll_params
>> + core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = {
>> + {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */
>> + {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */
>> + {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
>> - {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */
>> - {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */
>> - {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */
>> + {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
>> +};
>> +
>> +static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
>> + {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
>> - {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1} /* 38.4 MHz */
>> + {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> +};
>> +
>> +static const struct dpll_params iva_dpll_params_2330mhz_es2[NUM_SYS_CLKS] = {
>> + {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> /* ABE M & N values with sys_clk as source */
>> static const struct dpll_params
>> abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
>> - {49, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> /* ABE M & N values with 32K clock as source */
>> static const struct dpll_params abe_dpll_params_32k_196608khz = {
>> - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1
>> + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
>> };
>>
>> static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
>> - {400, 4, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> - {400, 7, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> - {400, 15, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> + {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
>> + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
>> + {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
>> + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
>> + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
>> + {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
>> };
>>
>> +
> spurious EOL
Ok, will correct this.
>> struct dplls omap5_dplls_es1 = {
>> .mpu = mpu_dpll_params_800mhz,
>> .core = core_dpll_params_2128mhz_ddr532,
>> @@ -185,6 +228,19 @@ struct dplls omap5_dplls_es1 = {
>> .usb = usb_dpll_params_1920mhz
>> };
>>
>> +struct dplls omap5_dplls_es2 = {
>> + .mpu = mpu_dpll_params_1100mhz,
>> + .core = core_dpll_params_2128mhz_ddr532_es2,
>> + .per = per_dpll_params_768mhz_es2,
>> + .iva = iva_dpll_params_2330mhz_es2,
>> +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
>> + .abe = abe_dpll_params_sysclk_196608khz,
>> +#else
>> + .abe = &abe_dpll_params_32k_196608khz,
>> +#endif
> I strongly suggest dumping ABE sourcing from 32K clock - the code is
> just a nuisance waiting to exercise an unsupported silicon feature
> waiting to happen.
>> + .usb = usb_dpll_params_1920mhz
>> +};
>> +
>> struct pmic_data palmas = {
>> .base_offset = PALMAS_SMPS_BASE_VOLT_UV,
>> .step = 10000, /* 10 mV represented in uV */
>> @@ -223,6 +279,20 @@ struct vcores_data omap5432_volts = {
>> .mm.pmic = &palmas,
>> };
>>
>> +struct vcores_data omap5430_volts_es2 = {
>> + .mpu.value = VDD_MPU_ES2,
>> + .mpu.addr = SMPS_REG_ADDR_12_MPU,
>> + .mpu.pmic = &palmas,
>> +
>> + .core.value = VDD_CORE_ES2,
>> + .core.addr = SMPS_REG_ADDR_8_CORE,
>> + .core.pmic = &palmas,
>> +
>> + .mm.value = VDD_MM_ES2,
>> + .mm.addr = SMPS_REG_ADDR_45_IVA,
>> + .mm.pmic = &palmas,
>> +};
>> +
>> /*
>> * Enable essential clock domains, modules and
>> * do some additional special settings needed
>> @@ -454,6 +524,8 @@ void hw_data_init(void)
>> case OMAP5430_ES2_0:
>> case OMAP5432_ES2_0:
>> *prcm = &omap5_es2_prcm;
>> + *dplls_data = &omap5_dplls_es2;
>> + *omap_vcores = &omap5430_volts_es2;
>> break;
>>
>> default:
>> diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
>> index 15362ae..685aad5 100644
>> --- a/arch/arm/include/asm/arch-omap5/clocks.h
>> +++ b/arch/arm/include/asm/arch-omap5/clocks.h
>> @@ -208,6 +208,10 @@
>> #define VDD_MM_5432 1150
>> #define VDD_CORE_5432 1150
>>
>> +#define VDD_MPU_ES2 1060
>> +#define VDD_MM_ES2 1025
>> +#define VDD_CORE_ES2 1040
> ^^^ these are meant only for OPP_NOM - considering that you have DPLLs
> for OPP_SB added in, do you even expect these devices to bootup at
> anything *but* OPP_NOM??
I agree. I add it manually while doing experiments. I will add these
here.
Regards,
Sricharan
More information about the U-Boot
mailing list