[U-Boot] [PATCH 2/2] OMAP3: igep00x0: Add new IGEP COM PROTON.

Javier Martinez Canillas javier at dowhile0.org
Wed Feb 6 11:53:30 CET 2013


Hi Enric,

On Wed, Feb 6, 2013 at 9:29 AM, Enric Balletbo i Serra
<eballetbo at gmail.com> wrote:
> From: Enric Balletbo i Serra <eballetbo at iseebcn.com>
>
> The IGEP COM PROTON is a new ultra compact module design with an
> on-board ethernet controller.
>
> Signed-off-by: Enric Balletbo i Serra <eballetbo at iseebcn.com>
> ---
>  MAINTAINERS                    |    1 +
>  board/isee/igep00x0/igep00x0.c |    3 +++
>  board/isee/igep00x0/igep00x0.h |    3 +++
>  boards.cfg                     |    1 +
>  4 files changed, 8 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d3ed390..1aed6d9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -607,6 +607,7 @@ Enric Balletbo i Serra <eballetbo at iseebcn.com>
>
>         igep0020        ARM ARMV7 (OMAP3xx SoC)
>         igep0030        ARM ARMV7 (OMAP3xx SoC)
> +       igep0032        ARM ARMV7 (OMAP3xx SoC)
>
>  Eric Benard <eric at eukrea.com>
>
> diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
> index 49fcf34..93aea8b 100644
> --- a/board/isee/igep00x0/igep00x0.c
> +++ b/board/isee/igep00x0/igep00x0.c
> @@ -68,8 +68,11 @@ void show_boot_progress(int val)
>                 return;
>         }
>
> +/* Skip in the case of IGEP0032 machine */
> +#if !(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
>         if (!gpio_request(IGEP00X0_GPIO_LED, ""))
>                 gpio_direction_output(IGEP00X0_GPIO_LED, 1);
> +#endif
>  }
>  #endif
>

So, this board doesn't have a GPIO LED to show it boot status?

If that's the case I think there is no point to call show_boot_progress().
Since this function is only compiled when CONFIG_SHOW_BOOT_PROGRESS
is defined. I think that a better approach is to just define it for the
machines that have a boot progress GPIO LED. e.g:

diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 88eadb4..98eed0f 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -85,8 +85,11 @@
 #define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1

+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
+    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
 /* define to enable boot progress via leds */
 #define CONFIG_SHOW_BOOT_PROGRESS
+#endif

 /* USB */
 #define CONFIG_MUSB_UDC                        1

> diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
> index dbc7cf6..f5fce9c 100644
> --- a/board/isee/igep00x0/igep00x0.h
> +++ b/board/isee/igep00x0/igep00x0.h
> @@ -39,6 +39,9 @@ const omap3_sysinfo sysinfo = {
>  #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
>         "IGEP COM MODULE/ELECTRON",
>  #endif
> +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
> +       "IGEP COM PROTON",
> +#endif
>  #if defined(CONFIG_ENV_IS_IN_ONENAND)
>         "ONENAND",
>  #else
> diff --git a/boards.cfg b/boards.cfg
> index 691a32a..8453836 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -259,6 +259,7 @@ igep0020                     arm         armv7       igep00x0            isee
>  igep0020_nand                arm         armv7       igep00x0            isee           omap3          igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
>  igep0030                     arm         armv7       igep00x0            isee           omap3          igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
>  igep0030_nand                arm         armv7       igep00x0            isee           omap3          igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
> +igep0032                     arm         armv7       igep00x0            isee           omap3          igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
>  am3517_evm                   arm         armv7       am3517evm           logicpd        omap3
>  mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
>  omap3_zoom1                  arm         armv7       zoom1               logicpd        omap3
> --

 This doesn't have a NAND version too like IGEP0020 and IGEP0030 boards?

You said that this board has an on-board ethernet controller. Does
this board use the
SMC911X chip connected to the OMAP GPMC too? In that case I guess you need
something like this to have CONFIG_CMD_NET enabled on
board/isee/igep00x0/igep00x0.c
for this board too:

diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 0e7f924..88eadb4 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -118,7 +118,8 @@
 #ifdef CONFIG_BOOT_NAND
 #define CONFIG_CMD_NAND
 #endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
+    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
 #define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
 #endif
 #define CONFIG_CMD_DHCP

Thanks a lot and best regards,
Javier


More information about the U-Boot mailing list