[U-Boot] [PATCH v4 6/9] nand: mxc: Use appropriate page number in syndrome functions

[Benoît Thébaudeau]

The syndrome functions should use the page number passed as argument instead of
the page number saved upon NAND_CMD_READ0.

This does not make any difference if the NAND_NO_AUTOINCR option is set, but
otherwise this fixes accesses to the wrong pages.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
---
Changes in v4:
 - New patch.

Changes in v3: None
Changes in v2: None

 drivers/mtd/nand/mxc_nand.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 6a709c5..32240ea 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -504,7 +504,7 @@ static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
 	int n;
 
 	_mxc_nand_enable_hwecc(mtd, 0);
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
 
 	for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
 		host->col_addr = n * eccsize;
@@ -548,7 +548,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
 	uint8_t *oob = chip->oob_poi;
 
 	MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
-	      host->page_addr, buf, oob);
+	      page, buf, oob);
 
 	/* first read the data area and the available portion of OOB */
 	for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
@@ -586,7 +586,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
 
 	/* Then switch ECC off and read the OOB area to get the ECC code */
 	_mxc_nand_enable_hwecc(mtd, 0);
-	chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr);
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
 	eccsteps = chip->ecc.steps;
 	oob = chip->oob_poi + chip->ecc.prepad;
 	for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
-- 
1.7.10.4