[U-Boot] [PATCHv2 3/3] OMAP3: igep00x0: Add new IGEP COM PROTON.
[Enric Balletbo i Serra
eballetbo at gmail.com
Thu Feb 7 11:40:06 CET 2013
From: Enric Balletbo i Serra <eballetbo at iseebcn.com>
The IGEP COM PROTON is a new ultra compact module design with an
on-board ethernet controller.
Signed-off-by: Enric Balletbo i Serra <eballetbo at iseebcn.com>
---
MAINTAINERS | 1 +
board/isee/igep00x0/igep00x0.h | 3 +++
boards.cfg | 1 +
include/configs/igep00x0.h | 6 +++++-
4 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index d3ed390..1aed6d9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -607,6 +607,7 @@ Enric Balletbo i Serra <eballetbo at iseebcn.com>
igep0020 ARM ARMV7 (OMAP3xx SoC)
igep0030 ARM ARMV7 (OMAP3xx SoC)
+ igep0032 ARM ARMV7 (OMAP3xx SoC)
Eric Benard <eric at eukrea.com>
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
index dbc7cf6..f5fce9c 100644
--- a/board/isee/igep00x0/igep00x0.h
+++ b/board/isee/igep00x0/igep00x0.h
@@ -39,6 +39,9 @@ const omap3_sysinfo sysinfo = {
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
"IGEP COM MODULE/ELECTRON",
#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
+ "IGEP COM PROTON",
+#endif
#if defined(CONFIG_ENV_IS_IN_ONENAND)
"ONENAND",
#else
diff --git a/boards.cfg b/boards.cfg
index 691a32a..8453836 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -259,6 +259,7 @@ igep0020 arm armv7 igep00x0 isee
igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
+igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
am3517_evm arm armv7 am3517evm logicpd omap3
mt_ventoux arm armv7 mt_ventoux teejet omap3
omap3_zoom1 arm armv7 zoom1 logicpd omap3
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 0e539ef..559e375 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -87,7 +87,10 @@
#define CONFIG_DOS_PARTITION 1
/* define to enable boot progress via leds */
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
+ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define CONFIG_SHOW_BOOT_PROGRESS
+#endif
/* USB */
#define CONFIG_MUSB_UDC 1
@@ -119,7 +122,8 @@
#ifdef CONFIG_BOOT_NAND
#define CONFIG_CMD_NAND
#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
+ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#endif
#define CONFIG_CMD_DHCP
--
1.7.10.4
More information about the U-Boot
mailing list