[U-Boot] [PATCH v5 23/23] tegra: Enable generic board for Seaboard.

[Stephen Warren]

On 02/08/2013 11:10 AM, Simon Glass wrote:
> Hi Stephen
> 
> On Fri, Feb 8, 2013 at 9:23 AM, Stephen Warren <swarren at wwwdotorg.org> wrote:
>> On 02/08/2013 08:12 AM, Simon Glass wrote:
>>> Enable CONFIG_SYS_GENERIC_BOARD for Tegra 2 Seaboard.
>>
>> Shouldn't this be enabled for Tegra generically, rather than for just
>> one Tegra board? I haven't looked at the rest of the series yet, but it
>> sure seems better if all Tegra boards always work the same way.
> 
> Yes but I can only test on that board. I suspect it should be OK with
> others but I've taken a fairly conservative approach as I don't want
> to break things.
> 
> If you have a board about, please try putting it in tegra-common.h or
> similar and see what happens.

This is something Tom should drive.

> BTW it would be nice to have a tegra20-dt.h config. Then I would just
> test that one board and know that other changes can only be
> FDT-related. But I think due to pinmux that isn't possible right now,
> as previously discussed.

Well, there are quite a few peripherals which are only
initialized/instantiated from board files too, so a generic DT config
wouldn't be very useful yet, although Tom and Allen are in the process
of converting things as they add Tegra114 support.