[U-Boot] [PATCH 1/5] ubi: Expose a few simple functions from the cmd_ubi

Stefan Roese sr at denx.de
Mon Feb 11 11:45:16 CET 2013


On 02/08/2013 09:07 PM, Joe Hershberger wrote:
> Part, Read, and Write functionality that will be used by env_ubi.
> 
> Signed-off-by: Joe Hershberger <joe.hershberger at ni.com>

Some minor nitpicking comments below.

> ---
>  common/cmd_ubi.c    | 146 ++++++++++++++++++++++++++++------------------------
>  include/ubi_uboot.h |   3 ++
>  2 files changed, 83 insertions(+), 66 deletions(-)
> 
> diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
> index 35b1d31..01335dd 100644
> --- a/common/cmd_ubi.c
> +++ b/common/cmd_ubi.c
> @@ -263,7 +263,7 @@ out_err:
>  	return err;
>  }
>  
> -static int ubi_volume_write(char *volume, void *buf, size_t size)
> +int ubi_volume_write(char *volume, void *buf, size_t size)
>  {
>  	int err = 1;
>  	int rsvd_bytes = 0;
> @@ -308,12 +308,10 @@ static int ubi_volume_write(char *volume, void *buf, size_t size)
>  		ubi_gluebi_updated(vol);
>  	}
>  
> -	printf("%d bytes written to volume %s\n", size, volume);
> -
>  	return 0;
>  }
>  
> -static int ubi_volume_read(char *volume, char *buf, size_t size)
> +int ubi_volume_read(char *volume, char *buf, size_t size)
>  {
>  	int err, lnum, off, len, tbuf_size;
>  	void *tbuf;
> @@ -325,8 +323,6 @@ static int ubi_volume_read(char *volume, char *buf, size_t size)
>  	if (vol == NULL)
>  		return ENODEV;
>  
> -	printf("Read %d bytes from volume %s to %p\n", size, volume, buf);
> -
>  	if (vol->updating) {
>  		printf("updating");
>  		return EBUSY;
> @@ -431,26 +427,82 @@ static int ubi_dev_scan(struct mtd_info *info, char *ubidev,
>  	return 0;
>  }
>  
> -static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
> +int ubi_part(char *part_name, const char *vid_header_offset)
>  {
> -	size_t size = 0;
> -	ulong addr = 0;
>  	int err = 0;
> -
> -	if (argc < 2)
> -		return CMD_RET_USAGE;
> +	char mtd_dev[16];
> +	struct mtd_device *dev;
> +	struct part_info *part;
> +	u8 pnum;
>  
>  	if (mtdparts_init() != 0) {
>  		printf("Error initializing mtdparts!\n");
>  		return 1;
>  	}
>  
> +#ifdef CONFIG_CMD_UBIFS
> +	/*
> +	 * Automatically unmount UBIFS partition when user
> +	 * changes the UBI device. Otherwise the following
> +	 * UBIFS commands will crash.
> +	 */
> +	if (ubifs_is_mounted())
> +		cmd_ubifs_umount();
> +#endif
> +
> +	/* todo: get dev number for NAND... */
> +	ubi_dev.nr = 0;
> +
> +	/*
> +	 * Call ubi_exit() before re-initializing the UBI subsystem
> +	 */
> +	if (ubi_initialized) {
> +		ubi_exit();
> +		del_mtd_partitions(ubi_dev.mtd_info);
> +	}
> +
> +	/*
> +	 * Search the mtd device number where this partition
> +	 * is located
> +	 */
> +	if (find_dev_and_part(part_name, &dev, &pnum, &part)) {
> +		printf("Partition %s not found!\n", part_name);
> +		return 1;
> +	}
> +	sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num);
> +	ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev);
> +	if (IS_ERR(ubi_dev.mtd_info)) {
> +		printf("Partition %s not found on device %s!\n", part_name,
> +			mtd_dev);
> +		return 1;
> +	}
> +
> +	ubi_dev.selected = 1;
> +
> +	strcpy(ubi_dev.part_name, part_name);
> +	err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name,
> +			vid_header_offset);
> +	if (err) {
> +		printf("UBI init error %d\n", err);
> +		ubi_dev.selected = 0;
> +		return err;
> +	}
> +
> +	ubi = ubi_devices[0];
> +
> +	return 0;
> +}
> +
> +static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> +	size_t size = 0;
> +	ulong addr = 0;
> +
> +	if (argc < 2)
> +		return CMD_RET_USAGE;
> +
>  	if (strcmp(argv[1], "part") == 0) {
> -		char mtd_dev[16];
> -		struct mtd_device *dev;
> -		struct part_info *part;
>  		const char *vid_header_offset = NULL;
> -		u8 pnum;
>  
>  		/* Print current partition */
>  		if (argc == 2) {
> @@ -467,58 +519,10 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
>  		if (argc < 3)
>  			return CMD_RET_USAGE;
>  
> -#ifdef CONFIG_CMD_UBIFS
> -		/*
> -		 * Automatically unmount UBIFS partition when user
> -		 * changes the UBI device. Otherwise the following
> -		 * UBIFS commands will crash.
> -		 */
> -		if (ubifs_is_mounted())
> -			cmd_ubifs_umount();
> -#endif
> -
> -		/* todo: get dev number for NAND... */
> -		ubi_dev.nr = 0;
> -
> -		/*
> -		 * Call ubi_exit() before re-initializing the UBI subsystem
> -		 */
> -		if (ubi_initialized) {
> -			ubi_exit();
> -			del_mtd_partitions(ubi_dev.mtd_info);
> -		}
> -
> -		/*
> -		 * Search the mtd device number where this partition
> -		 * is located
> -		 */
> -		if (find_dev_and_part(argv[2], &dev, &pnum, &part)) {
> -			printf("Partition %s not found!\n", argv[2]);
> -			return 1;
> -		}
> -		sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num);
> -		ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev);
> -		if (IS_ERR(ubi_dev.mtd_info)) {
> -			printf("Partition %s not found on device %s!\n", argv[2], mtd_dev);
> -			return 1;
> -		}
> -
> -		ubi_dev.selected = 1;
> -
>  		if (argc > 3)
>  			vid_header_offset = argv[3];
> -		strcpy(ubi_dev.part_name, argv[2]);
> -		err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name,
> -				vid_header_offset);
> -		if (err) {
> -			printf("UBI init error %d\n", err);
> -			ubi_dev.selected = 0;
> -			return err;
> -		}
>  
> -		ubi = ubi_devices[0];
> -
> -		return 0;
> +		return ubi_part(argv[2], vid_header_offset);
>  	}
>  
>  	if ((strcmp(argv[1], "part") != 0) && (!ubi_dev.selected)) {
> @@ -571,6 +575,8 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
>  	}
>  
>  	if (strncmp(argv[1], "write", 5) == 0) {
> +		int ret;
> +
>  		if (argc < 5) {
>  			printf("Please see usage\n");
>  			return 1;
> @@ -579,7 +585,12 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
>  		addr = simple_strtoul(argv[2], NULL, 16);
>  		size = simple_strtoul(argv[4], NULL, 16);
>  
> -		return ubi_volume_write(argv[3], (void *)addr, size);
> +		ret = ubi_volume_write(argv[3], (void *)addr, size);
> +		if (!ret)
> +			printf("%d bytes written to volume %s\n", size,
> +				argv[3]);

Use parentheses on multi-line statements please.

> +
> +		return ret;
>  	}
>  
>  	if (strncmp(argv[1], "read", 4) == 0) {
> @@ -598,6 +609,9 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
>  		}
>  
>  		if (argc == 3)
> +			printf("Read %d bytes from volume %s to %lx\n", size,
> +				argv[3], addr);

Again.

> +
>  			return ubi_volume_read(argv[3], (char *)addr, size);
>  	}
>  
> diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h
> index 69006e2..1207895 100644
> --- a/include/ubi_uboot.h
> +++ b/include/ubi_uboot.h
> @@ -214,6 +214,9 @@ static inline long IS_ERR(const void *ptr)
>  extern int ubi_mtd_param_parse(const char *val, struct kernel_param *kp);
>  extern int ubi_init(void);
>  extern void ubi_exit(void);
> +int ubi_part(char *part_name, const char *vid_header_offset);
> +extern int ubi_volume_write(char *volume, void *buf, size_t size);
> +extern int ubi_volume_read(char *volume, char *buf, size_t size);

Why do you add one function prototype without "extern" and 2 with?
Please handle this consistently.

Thanks,
Stefan


More information about the U-Boot mailing list