[U-Boot] [PATCH v2 07/10] usb: mxs: Disable USB Port 1 for i.MX23

[Otavio Salvador]

The i.MX23 just one USB port so disable the second controller probe
when building for i.MX23.

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---
Changes in v2:
- Avoid wrong clock setting in MX23

 drivers/usb/host/ehci-mxs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c
index 5062af5..b7bf856 100644
--- a/drivers/usb/host/ehci-mxs.c
+++ b/drivers/usb/host/ehci-mxs.c
@@ -50,10 +50,12 @@ int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port)
 		usb_base = MXS_USBCTRL0_BASE;
 		phy_base = MXS_USBPHY0_BASE;
 		break;
+#ifdef CONFIG_MX28
 	case 1:
 		usb_base = MXS_USBCTRL1_BASE;
 		phy_base = MXS_USBPHY1_BASE;
 		break;
+#endif
 	default:
 		printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port);
 		return -1;
@@ -67,7 +69,9 @@ int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port)
 /* This DIGCTL register ungates clock to USB */
 #define	HW_DIGCTL_CTRL			0x8001c000
 #define	HW_DIGCTL_CTRL_USB0_CLKGATE	(1 << 2)
+#ifdef CONFIG_MX28
 #define	HW_DIGCTL_CTRL_USB1_CLKGATE	(1 << 16)
+#endif
 
 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
@@ -95,8 +99,12 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 	writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
 			&clkctrl_regs->hw_clkctrl_pll1ctrl0_set);
 
+#if defined(CONFIG_MX23)
+	writel(HW_DIGCTL_CTRL_USB0_CLKGATE,	&digctl_ctrl->reg_clr);
+#elif defined(CONFIG_MX28)
 	writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
 		&digctl_ctrl->reg_clr);
+#endif
 
 	/* Start USB PHY */
 	writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd);
@@ -153,8 +161,12 @@ int ehci_hcd_stop(int index)
 			&clkctrl_regs->hw_clkctrl_pll1ctrl0_clr);
 
 	/* Gate off the USB clock */
+#if defined(CONFIG_MX23)
+	writel(HW_DIGCTL_CTRL_USB0_CLKGATE,	&digctl_ctrl->reg_set);
+#elif defined(CONFIG_MX28)
 	writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
 		&digctl_ctrl->reg_set);
+#endif
 
 	return 0;
 }
-- 
1.8.1