[U-Boot] [PATCH 2/2 v4] tools: add support for Dove to kwboot
Luka Perkov
luka at openwrt.org
Tue Feb 12 09:59:09 CET 2013
From: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
On Dove mvboot can also be used to boot an u-boot image into RAM.
In contrast to Kirkwood, Dove does not support the UART boot mode
sequence but requires the UART boot mode to be selected through
strap pins. The SolidRun CuBox has a push button to allow uart
boot mode but fails on the boot sequence sent by mvboot.
This patch adds another cmdline option to allow to send a boot
image without the boot sequence and adds support for Dove.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
Signed-off-by: Daniel Stodden <daniel.stodden at gmail.com>
Signed-off-by: Luka Perkov <luka at openwrt.org>
Cc: Prafulla Wadaskar <prafulla at marvell.com>
Cc: Rabeeh Khoury <rabeeh at solid-run.com>
---
changes from v1 to v2:
* update documentation
changes from v2 to v3:
* none
changes from v3 to v4:
* move to separate patch series
* fix wrong flag in the man page
* document Dove support in the header of mvboot.c
doc/mvboot.1 | 13 ++++++++++---
tools/Makefile | 2 ++
tools/mvboot.c | 27 ++++++++++++++++++++-------
3 files changed, 32 insertions(+), 10 deletions(-)
diff --git a/doc/mvboot.1 b/doc/mvboot.1
index 563d0e5..0978351 100644
--- a/doc/mvboot.1
+++ b/doc/mvboot.1
@@ -1,17 +1,18 @@
-.TH MVBOOT 1 "2012-05-19"
+.TH MVBOOT 1 "2013-02-12"
.SH NAME
-mvboot \- Boot Marvell Kirkwood SoCs over a serial link.
+mvboot \- Boot Marvell Kirkwood/Dove SoCs over a serial link.
.SH SYNOPSIS
.B mvboot
.RB [ "-b \fIimage\fP" ]
+.RB [ "-n" ]
.RB [ "-p" ]
.RB [ "-t" ]
.RB [ "-B \fIbaudrate\fP" ]
.RB \fITTY\fP
.SH "DESCRIPTION"
-The \fBmkimage\fP program boots boards based on Marvell's Kirkwood
+The \fBmkimage\fP program boots boards based on Marvell's Kirkwood/Dove
platform over their integrated UART. Boot image files will typically
contain a second stage boot loader, such as U-Boot. The image file
must conform to Marvell's BootROM firmware image format
@@ -68,6 +69,12 @@ If standard I/O streams connect to a console, this mode will terminate
after receiving 'ctrl-\\' followed by 'c' from console input.
.TP
+.BI "\-n"
+Disables the UART boot mode sequence for platforms that do not support
+it (e.g. Dove). Usually, the UART boot mode must be selected by pressing
+a push button on power-up.
+
+.TP
.BI "\-B \fIbaudrate\fP"
Adjust the baud rate on \fITTY\fP. Default rate is 115200.
diff --git a/tools/Makefile b/tools/Makefile
index adfb643..db4def5 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -72,6 +72,7 @@ BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX)
BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
+BIN_FILES-$(CONFIG_DOVE) += mvboot$(SFX)
BIN_FILES-$(CONFIG_KIRKWOOD) += mvboot$(SFX)
# Source files which exist outside the tools directory
@@ -103,6 +104,7 @@ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
NOPED_OBJ_FILES-y += os_support.o
OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
NOPED_OBJ_FILES-y += ublimage.o
+OBJ_FILES-$(CONFIG_DOVE) += mvboot.o
OBJ_FILES-$(CONFIG_KIRKWOOD) += mvboot.o
# Don't build by default
diff --git a/tools/mvboot.c b/tools/mvboot.c
index 94fb0dd..ea12f58 100644
--- a/tools/mvboot.c
+++ b/tools/mvboot.c
@@ -1,5 +1,5 @@
/*
- * Boot a Marvell Kirkwood SoC, with Xmodem over UART0.
+ * Boot a Marvell Kirkwood and Dove SoCs, with Xmodem over UART0.
*
* (c) 2012 Daniel Stodden <daniel.stodden at gmail.com>
*
@@ -37,6 +37,10 @@ static unsigned char mvboot_msg_boot[] = {
0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77
};
+static unsigned char mvboot_msg_none[] = {
+ 0x00
+};
+
#define MVBOOT_MSG_REQ_DELAY 10 /* ms */
#define MVBOOT_MSG_RSP_TIMEO 50 /* ms */
@@ -268,17 +272,21 @@ mvboot_bootmsg(int tty, void *msg)
int rc;
char c;
- mvboot_printv("Sending boot message. Please reboot the target...");
+ mvboot_printv(msg != mvboot_msg_none
+ ? "Sending boot message. Please reboot the target..."
+ : "Sensing target. Please reboot target into UART mode...");
do {
rc = tcflush(tty, TCIOFLUSH);
if (rc)
break;
- rc = mvboot_tty_send(tty, msg, 8);
- if (rc) {
- usleep(MVBOOT_MSG_REQ_DELAY * 1000);
- continue;
+ if (msg != mvboot_msg_none) {
+ rc = mvboot_tty_send(tty, msg, 8);
+ if (rc) {
+ usleep(MVBOOT_MSG_REQ_DELAY * 1000);
+ continue;
+ }
}
rc = mvboot_tty_recv(tty, &c, 1, MVBOOT_MSG_RSP_TIMEO);
@@ -607,6 +615,7 @@ mvboot_usage(FILE *stream, char *progname)
fprintf(stream, " -b <image>: boot <image>\n");
fprintf(stream, " -p: patch <image> to type 0x69 (uart boot)\n");
fprintf(stream, "\n");
+ fprintf(stream, " -n: don't send boot message\n");
fprintf(stream, " -t: mini terminal\n");
fprintf(stream, "\n");
fprintf(stream, " -B <baud>: set baud rate\n");
@@ -636,7 +645,7 @@ main(int argc, char **argv)
mvboot_verbose = isatty(STDOUT_FILENO);
do {
- int c = getopt(argc, argv, "hb:ptB:");
+ int c = getopt(argc, argv, "hb:nptB:");
if (c < 0)
break;
@@ -646,6 +655,10 @@ main(int argc, char **argv)
imgpath = optarg;
break;
+ case 'n':
+ bootmsg = mvboot_msg_none;
+ break;
+
case 'p':
patch = 1;
break;
--
1.8.1.2
More information about the U-Boot
mailing list