[U-Boot] [PATCH v2 2/2] Tegra: MMC: Add DT support to MMC driver for all T20 boards

[Stephen Warren]

On 02/12/2013 01:57 PM, Tom Warren wrote:
> Stephen,
> 
> On Tue, Feb 12, 2013 at 1:38 PM, Stephen Warren <swarren at wwwdotorg.org> wrote:
>> On 02/11/2013 10:17 AM, Tom Warren wrote:
>>> tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc.
>>> Tested on Seaboard, fully functional.
>>>
>>> Tamonten boards (medcom-wide, plutux, and tec) use a different/new
>>> dtsi file w/common settings.

>>> diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h
>>> diff --git a/include/configs/plutux.h b/include/configs/plutux.h
>>> diff --git a/include/configs/tec.h b/include/configs/tec.h
>>
>> In all 3 of those files ...
>>
>>>  #define CONFIG_DEFAULT_DEVICE_TREE   tegra20-medcom-wide
>>
>> Why not change that define ...
>>
>>>  #define CONFIG_OF_CONTROL
>>>  #define CONFIG_OF_SEPARATE
>>> +#undef CONFIG_ARCH_DEVICE_TREE
>>> +#define CONFIG_ARCH_DEVICE_TREE              tegra20-tamonten
>>
>> rather than adding that one? All the other Tegra boards only set
>> CONFIG_DEFAULT_DEVICE_TREE.
> 
> CONFIG_DEFAULT_DEVICE_TREE is the .dts file (board/nvidia/dts).
> CONFIG_ARCH_DEVICE_TREE is the .dtsi file (arch/arm/dts). See
> Thierry's explanation, also.

So why set CONFIG_ARCH_DEVICE_TREE to tegra20-tamonten here; if that
variable is supposed to point at the SoC .dtsi file, that value is
wrong; it *should* be tegra20.dtsi.

Oh yuck. I see what's going on now. e.g. tegra20-medcom-wide.dts is
including ARCH_CPU_DTS. It should be including tegra20-tamonten.dtsi,
which then includes ARCH_CPU_DTS. The ARCH_CPU_DTS variable is supposed
to only ever point at the SoC .dtsi file, not any "intermediate" .dtsi
file... You probably need to put tegra20-tamonten.dtsi into
board/avionic-design/dts rather than arch/arm/dts to make that work.