[U-Boot] [PATCH 07/14] tegra114: dalmore: add SPI pinmux config

[Allen Martin]

Configure pinmux for SPI4 controller.

Signed-off-by: Allen Martin <amartin at nvidia.com>
---
 board/nvidia/dalmore/pinmux-config-dalmore.h |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
index 3dd47da..b337119 100644
--- a/board/nvidia/dalmore/pinmux-config-dalmore.h
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -225,6 +225,12 @@ static struct pingroup_config tegra114_pinmux_common[] = {
 	DEFAULT_PINMUX(SPI2_SCK,	GMI,      NORMAL, NORMAL,   INPUT),
 	DEFAULT_PINMUX(GPIO_PBB4,       VGP4,     NORMAL, NORMAL,   INPUT),
 	DEFAULT_PINMUX(KB_ROW8,	        KBC,      UP,     NORMAL,   INPUT),
+
+	/* SPI */
+	DEFAULT_PINMUX(GMI_AD5,	        SPI4,     NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(GMI_AD6,	        SPI4,     NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(GMI_AD7,	        SPI4,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_CS6_N,       SPI4,     NORMAL, NORMAL,   OUTPUT),
 };
 
 static struct pingroup_config unused_pins_lowpower[] = {
@@ -237,9 +243,6 @@ static struct pingroup_config unused_pins_lowpower[] = {
 	DEFAULT_PINMUX(GMI_AD2,	        NAND,     NORMAL, TRISTATE, INPUT),
 	DEFAULT_PINMUX(GMI_AD3,	        NAND,     NORMAL, TRISTATE, INPUT),
 	DEFAULT_PINMUX(GMI_AD4,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD5,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD6,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD7,	        NAND,     NORMAL, TRISTATE, INPUT),
 	DEFAULT_PINMUX(GMI_AD9,	        PWM1,     NORMAL, TRISTATE, OUTPUT),
 	DEFAULT_PINMUX(GMI_AD11,	NAND,     NORMAL, TRISTATE, OUTPUT),
 	DEFAULT_PINMUX(GMI_AD13,	NAND,     UP,	  NORMAL,   INPUT),
-- 
1.7.10.4