[U-Boot] [PATCH 7/7] arm: dra7xx: Add dra7xx_evm build support

Lokesh Vutla lokeshvutla at ti.com
Wed Feb 13 08:29:09 CET 2013


Adding the build support for dra7xx_evm.
Reusing omap5_evm.h config by moving it to omap5_common.h

Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: R Sricharan <r.sricharan at ti.com>
---
 boards.cfg                                      |    1 +
 include/configs/dra7xx_evm.h                    |   40 ++++
 include/configs/{omap5_evm.h => omap5_common.h} |   20 +-
 include/configs/omap5_evm.h                     |  240 +----------------------
 4 files changed, 55 insertions(+), 246 deletions(-)
 create mode 100644 include/configs/dra7xx_evm.h
 copy include/configs/{omap5_evm.h => omap5_common.h} (95%)

diff --git a/boards.cfg b/boards.cfg
index 98f7a14..fea1101 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -279,6 +279,7 @@ nokia_rx51                   arm         armv7       rx51                nokia
 omap4_panda                  arm         armv7       panda               ti             omap4
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 omap5_evm                    arm         armv7       omap5_evm           ti		omap5
+dra7xx_evm		     arm	 armv7	     dra7xx		 ti	        omap5
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
 origen			     arm	 armv7	     origen		 samsung	exynos
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
new file mode 100644
index 0000000..17747d2
--- /dev/null
+++ b/include/configs/dra7xx_evm.h
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated.
+ * Lokesh Vutla	  <lokeshvutla at ti.com>
+ *
+ * Configuration settings for the TI DRA7XX board.
+ * See omap5_common.h for omap5 common settings.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DRA7XX_EVM_H
+#define __CONFIG_DRA7XX_EVM_H
+
+#include <configs/omap5_common.h>
+
+#define CONFIG_OMAP
+#define CONFIG_DRA7XX		/* in a TI DRA7XX core */
+#define CONFIG_DRA752_EVM
+
+#define CONFIG_SYS_PROMPT		"DRA752 EVM # "
+
+#endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_common.h
similarity index 95%
copy from include/configs/omap5_evm.h
copy to include/configs/omap5_common.h
index 1d3ac2b..db453df 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_common.h
@@ -1,12 +1,12 @@
 /*
- * (C) Copyright 2010
+ * (C) Copyright 2013
  * Texas Instruments Incorporated.
  * Sricharan R	  <r.sricharan at ti.com>
  *
  * Derived from OMAP4 done by:
  *	Aneesh V <aneesh at ti.com>
  *
- * Configuration settings for the TI EVM5430 board.
+ * TI OMAP5 AND DRA7XX common configuration settings
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -27,17 +27,15 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_OMAP5_COMMON_H
+#define __CONFIG_OMAP5_COMMON_H
 
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMV7	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP	/* in a TI OMAP core */
 #define CONFIG_OMAP54XX	/* which is a 54XX */
-#define CONFIG_OMAP5430	/* which is in a 5430 */
-#define CONFIG_5430EVM	/* working with EVM */
+#define CONFIG_ARMV7	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP_GPIO
 
 /* Get CPU defs */
@@ -96,10 +94,6 @@
 #define CONFIG_DRIVER_OMAP34XX_I2C
 #define CONFIG_I2C_MULTI_BUS
 
-/* TWL6035 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6035_POWER
-#endif
 
 /* MMC */
 #define CONFIG_GENERIC_MMC
@@ -185,7 +179,6 @@
 
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"OMAP5430 EVM # "
 #define CONFIG_SYS_CBSIZE		256
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -266,4 +259,4 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
 #define CONFIG_SPL_GPIO_SUPPORT
 
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_OMAP5_COMMON_H */
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index 1d3ac2b..152a4c8 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -1,12 +1,10 @@
 /*
- * (C) Copyright 2010
+ * (C) Copyright 2013
  * Texas Instruments Incorporated.
  * Sricharan R	  <r.sricharan at ti.com>
  *
- * Derived from OMAP4 done by:
- *	Aneesh V <aneesh at ti.com>
- *
  * Configuration settings for the TI EVM5430 board.
+ * See omap5_common.h for omap5 common settings.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -27,243 +25,19 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_OMAP5_EVM_H
+#define __CONFIG_OMAP5_EVM_H
+
+#include <configs/omap5_common.h>
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMV7	/* This is an ARM V7 CPU core */
-#define CONFIG_OMAP	/* in a TI OMAP core */
-#define CONFIG_OMAP54XX	/* which is a 54XX */
 #define CONFIG_OMAP5430	/* which is in a 5430 */
 #define CONFIG_5430EVM	/* working with EVM */
-#define CONFIG_OMAP_GPIO
-
-/* Get CPU defs */
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* Display CPU and Board Info */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Clock Defines */
-#define V_OSCK			19200000	/* Clock output from T2 */
-#define V_SCLK	V_OSCK
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- * Total Size Environment - 128k
- * Malloc - add 256k
- */
-#define CONFIG_ENV_SIZE			(128 << 10)
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
-/* Vector Base */
-#define CONFIG_SYS_CA9_VECTOR_BASE	SRAM_ROM_VECT_BASE
-
-/*
- * Hardware drivers
- */
-
-/*
- * serial port - NS16550 compatible
- */
-#define V_NS16550_CLK			48000000
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		UART3_BASE
-
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
-					115200}
-/* I2C  */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
-#define CONFIG_I2C_MULTI_BUS
 
 /* TWL6035 */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_TWL6035_POWER
 #endif
 
-/* MMC */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-/* MMC ENV related defines */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
-#define CONFIG_ENV_OFFSET		0xE0000
-#define CONFIG_CMD_SAVEENV
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Flash */
-#define CONFIG_SYS_NO_FLASH
-
-/* Cache */
-#define CONFIG_SYS_CACHELINE_SIZE	64
-#define CONFIG_SYS_CACHELINE_SHIFT	6
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-/* Enabled commands */
-#define CONFIG_CMD_EXT2		/* EXT2 Support                 */
-#define CONFIG_CMD_FAT		/* FAT support                  */
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support                  */
-#define CONFIG_CMD_SAVEENV
-
-/* Disabled commands */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
-#undef CONFIG_CMD_IMLS		/* List all found images        */
-
-/*
- * Environment setup
- */
-
-#define CONFIG_BOOTDELAY	3
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x82000000\0" \
-	"console=ttyO2,115200n8\0" \
-	"usbtty=cdc_acm\0" \
-	"vram=16M\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"vram=${vram} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-		"source ${loadaddr}\0" \
-	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loaduimage; then " \
-				"run mmcboot; " \
-			"fi; " \
-		"fi; " \
-	"fi"
-
-#define CONFIG_AUTO_COMPLETE		1
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT		"OMAP5430 EVM # "
-#define CONFIG_SYS_CBSIZE		256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-/*
- * memtest setup
- */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (32 << 20))
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR		0x80000000
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT2_BASE
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
-
-/*
- * SDRAM Memory Map
- * Even though we use two CS all the memory
- * is mapped to one contiguous block
- */
-#define CONFIG_NR_DRAM_BANKS	1
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-
-/* Defines for SDRAM init */
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x40300350
-#define CONFIG_SPL_MAX_SIZE		0x19000	/* 100K */
-#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_DISPLAY_PRINT
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-/*
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 80E7FFC0--0x80E80000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80E80000
-
-/*
- * BSS and malloc area 64MB into memory to allow enough
- * space for the kernel at the beginning of memory
- */
-#define CONFIG_SPL_BSS_START_ADDR	0x84000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x84100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
-#define CONFIG_SPL_GPIO_SUPPORT
 
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_OMAP5_EVM_H */
-- 
1.7.9.5



More information about the U-Boot mailing list