[U-Boot] [PATCH v3 0/3] Tegra: MMC: Add DT support for MMC to T20 boards

Tom Warren twarren.nvidia at gmail.com
Thu Feb 14 16:33:08 CET 2013


Thanks!

On Thu, Feb 14, 2013 at 12:19 AM, Thierry Reding
<thierry.reding at avionic-design.de> wrote:
> On Wed, Feb 13, 2013 at 02:44:47PM -0700, Tom Warren wrote:
>> This patchset adds device-tree support to the Tegra MMC driver.
>> All device config is done via properties in the DT files instead
>> of hard-coded config options/function arguments.
>>
>> I've tested this on my Seaboard and everything works fine,
>> including card detect. For the other T20 boards, I've used
>> the Linux kernel DTS files for the sdhci nodes where there
>> wasn't one already, or expanded the info that was already
>> there. Everything builds fine, but I haven't tested anything
>> but Seaboard.
>>
>> v2: Changes as per Stephen's & Simon's review
>> v3: Changes as per Stephen/Lucas/Thierry/Simon's feedback
>>
>> Tom Warren (3):
>>   Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
>>   Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux
>>   Tegra: MMC: Add DT support to MMC driver for all T20 boards
>>
>>  arch/arm/dts/tegra20.dtsi                         |   16 +-
>>  arch/arm/include/asm/arch-tegra/mmc.h             |    2 +-
>>  arch/arm/include/asm/arch-tegra/tegra_mmc.h       |   13 +-
>>  board/avionic-design/common/tamonten.c            |   19 +-
>>  board/avionic-design/dts/tegra20-medcom-wide.dts  |    3 +-
>>  board/avionic-design/dts/tegra20-plutux.dts       |    3 +-
>>  board/avionic-design/dts/tegra20-tamonten.dtsi    |  489 +++++++++++++++++++++
>>  board/avionic-design/dts/tegra20-tec.dts          |    3 +-
>>  board/compal/dts/tegra20-paz00.dts                |   19 +-
>>  board/compal/paz00/paz00.c                        |   26 +-
>>  board/compulab/dts/tegra20-trimslice.dts          |   14 +
>>  board/compulab/trimslice/trimslice.c              |   25 +-
>>  board/nvidia/common/board.c                       |   26 +-
>>  board/nvidia/dts/tegra20-harmony.dts              |   18 +
>>  board/nvidia/dts/tegra20-seaboard.dts             |   10 +-
>>  board/nvidia/dts/tegra20-ventana.dts              |   15 +
>>  board/nvidia/dts/tegra20-whistler.dts             |   13 +
>>  board/nvidia/harmony/harmony.c                    |   26 +-
>>  board/nvidia/seaboard/seaboard.c                  |   25 +-
>>  board/nvidia/whistler/whistler.c                  |   30 +-
>>  board/toradex/colibri_t20_iris/colibri_t20_iris.c |   11 +-
>>  board/toradex/dts/tegra20-colibri_t20_iris.dts    |    7 +
>>  drivers/mmc/tegra_mmc.c                           |  259 +++++++----
>>  dts/Makefile                                      |    2 +-
>>  include/fdtdec.h                                  |    1 +
>>  lib/fdtdec.c                                      |    1 +
>>  26 files changed, 815 insertions(+), 261 deletions(-)
>>  create mode 100644 board/avionic-design/dts/tegra20-tamonten.dtsi
>
> The series,
>
> Tested-by: Thierry Reding <thierry.reding at avionic-design.de>
>
> on TEC and Medcom-Wide. I don't currently have access to a Plutux, but
> it should be fine too.
>
> Thierry


More information about the U-Boot mailing list