[U-Boot] [PATCH v2 1/5] x86: Remove eNET boards

Simon Glass sjg at chromium.org
Fri Feb 15 05:35:46 CET 2013


On Thu, Feb 14, 2013 at 3:58 PM, Gabe Black <gabeblack at google.com> wrote:
> Acked-by: Gabe Black <gabeblack at chromium.org>
>
>
> On Thu, Feb 14, 2013 at 6:18 AM, Simon Glass <sjg at chromium.org> wrote:
>>
>> These are no longer used and should be removed.
>>
>>
>> Signed-off-by: Simon Glass <sjg at chromium.org>
>> Acked-by: Graeme Russ <graeme.russ at gmail.com>

Applied to x86/master.

>> ---
>> Changes in v2: None
>>
>>  board/eNET/Makefile       |  52 ----
>>  board/eNET/eNET.c         | 284 ---------------------
>>  board/eNET/eNET_pci.c     | 128 ----------
>>  board/eNET/eNET_start.S   |  30 ---
>>  board/eNET/eNET_start16.S |  87 -------
>>  board/eNET/hardware.h     |  36 ---
>>  boards.cfg                |   2 -
>>  include/configs/eNET.h    | 619
>> ----------------------------------------------
>>  8 files changed, 1238 deletions(-)
>>  delete mode 100644 board/eNET/Makefile
>>  delete mode 100644 board/eNET/eNET.c
>>  delete mode 100644 board/eNET/eNET_pci.c
>>  delete mode 100644 board/eNET/eNET_start.S
>>  delete mode 100644 board/eNET/eNET_start16.S
>>  delete mode 100644 board/eNET/hardware.h
>>  delete mode 100644 include/configs/eNET.h
>>
>> diff --git a/board/eNET/Makefile b/board/eNET/Makefile
>> deleted file mode 100644
>> index ad1c5b1..0000000
>> --- a/board/eNET/Makefile
>> +++ /dev/null
>> @@ -1,52 +0,0 @@
>> -#
>> -# (C) Copyright 2008
>> -# Graeme Russ, graeme.russ at gmail.com.
>> -#
>> -# (C) Copyright 2006
>> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> -#
>> -# (C) Copyright 2002
>> -# Daniel Engström, Omicron Ceti AB, daniel at omicron.se.
>> -#
>> -# See file CREDITS for list of people who contributed to this
>> -# project.
>> -#
>> -# This program is free software; you can redistribute it and/or
>> -# modify it under the terms of the GNU General Public License as
>> -# published by the Free Software Foundation; either version 2 of
>> -# the License, or (at your option) any later version.
>> -#
>> -# This program is distributed in the hope that it will be useful,
>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> -# GNU General Public License for more details.
>> -#
>> -# You should have received a copy of the GNU General Public License
>> -# along with this program; if not, write to the Free Software
>> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> -# MA 02111-1307 USA
>> -#
>> -
>> -include $(TOPDIR)/config.mk
>> -
>> -LIB    = $(obj)lib$(BOARD).o
>> -
>> -COBJS-y        += eNET.o
>> -COBJS-$(CONFIG_PCI) += eNET_pci.o
>> -SOBJS-y        += eNET_start16.o
>> -SOBJS-y        += eNET_start.o
>> -
>> -SRCS   := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
>> -OBJS   := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
>> -
>> -$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
>> -       $(call cmd_link_o_target, $(OBJS) $(SOBJS))
>> -
>> -#########################################################################
>> -
>> -# defines $(obj).depend target
>> -include $(SRCTREE)/rules.mk
>> -
>> -sinclude $(obj).depend
>> -
>> -#########################################################################
>> diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
>> deleted file mode 100644
>> index 2f26470..0000000
>> --- a/board/eNET/eNET.c
>> +++ /dev/null
>> @@ -1,284 +0,0 @@
>> -/*
>> - * (C) Copyright 2008
>> - * Graeme Russ, graeme.russ at gmail.com.
>> - *
>> - * See file CREDITS for list of people who contributed to this
>> - * project.
>> - *
>> - * This program is free software; you can redistribute it and/or
>> - * modify it under the terms of the GNU General Public License as
>> - * published by the Free Software Foundation; either version 2 of
>> - * the License, or (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
>> - * GNU General Public License for more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> - * MA 02111-1307 USA
>> - */
>> -
>> -#include <common.h>
>> -#include <asm/io.h>
>> -#include <asm/arch/sc520.h>
>> -#include <net.h>
>> -#include <netdev.h>
>> -
>> -#ifdef CONFIG_HW_WATCHDOG
>> -#include <watchdog.h>
>> -#endif
>> -
>> -#include "hardware.h"
>> -
>> -DECLARE_GLOBAL_DATA_PTR;
>> -
>> -unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
>> -
>> -static void enet_timer_isr(void);
>> -static void enet_toggle_run_led(void);
>> -static void enet_setup_pars(void);
>> -
>> -/*
>> - * Miscellaneous platform dependent initializations
>> - */
>> -int board_early_init_f(void)
>> -{
>> -       u16 pio_out_cfg = 0x0000;
>> -
>> -       /* Configure General Purpose Bus timing */
>> -       writeb(CONFIG_SYS_SC520_GPCSRT, &sc520_mmcr->gpcsrt);
>> -       writeb(CONFIG_SYS_SC520_GPCSPW, &sc520_mmcr->gpcspw);
>> -       writeb(CONFIG_SYS_SC520_GPCSOFF, &sc520_mmcr->gpcsoff);
>> -       writeb(CONFIG_SYS_SC520_GPRDW, &sc520_mmcr->gprdw);
>> -       writeb(CONFIG_SYS_SC520_GPRDOFF, &sc520_mmcr->gprdoff);
>> -       writeb(CONFIG_SYS_SC520_GPWRW, &sc520_mmcr->gpwrw);
>> -       writeb(CONFIG_SYS_SC520_GPWROFF, &sc520_mmcr->gpwroff);
>> -
>> -       /* Configure Programmable Input/Output Pins */
>> -       writew(CONFIG_SYS_SC520_PIODIR15_0, &sc520_mmcr->piodir15_0);
>> -       writew(CONFIG_SYS_SC520_PIODIR31_16, &sc520_mmcr->piodir31_16);
>> -       writew(CONFIG_SYS_SC520_PIOPFS31_16, &sc520_mmcr->piopfs31_16);
>> -       writew(CONFIG_SYS_SC520_PIOPFS15_0, &sc520_mmcr->piopfs15_0);
>> -       writeb(CONFIG_SYS_SC520_CSPFS, &sc520_mmcr->cspfs);
>> -       writeb(CONFIG_SYS_SC520_CLKSEL, &sc520_mmcr->clksel);
>> -
>> -       /*
>> -        * Turn off top board
>> -        * Set StrataFlash chips to 16-bit width
>> -        * Set StrataFlash chips to normal (non reset/power down) mode
>> -        */
>> -       pio_out_cfg |= CONFIG_SYS_ENET_TOP_BRD_PWR;
>> -       pio_out_cfg |= CONFIG_SYS_ENET_SF_WIDTH;
>> -       pio_out_cfg |= CONFIG_SYS_ENET_SF1_MODE;
>> -       pio_out_cfg |= CONFIG_SYS_ENET_SF2_MODE;
>> -       writew(pio_out_cfg, &sc520_mmcr->pioset15_0);
>> -
>> -       /* Turn off auxiliary power output */
>> -       writew(CONFIG_SYS_ENET_AUX_PWR, &sc520_mmcr->pioclr15_0);
>> -
>> -       /* Clear FPGA program mode */
>> -       writew(CONFIG_SYS_ENET_FPGA_PROG, &sc520_mmcr->pioset31_16);
>> -
>> -       enet_setup_pars();
>> -
>> -       /* Disable Watchdog */
>> -       writew(0x3333, &sc520_mmcr->wdtmrctl);
>> -       writew(0xcccc, &sc520_mmcr->wdtmrctl);
>> -       writew(0x0000, &sc520_mmcr->wdtmrctl);
>> -
>> -       /* Chip Select Configuration */
>> -       writew(CONFIG_SYS_SC520_BOOTCS_CTRL, &sc520_mmcr->bootcsctl);
>> -       writew(CONFIG_SYS_SC520_ROMCS1_CTRL, &sc520_mmcr->romcs1ctl);
>> -       writew(CONFIG_SYS_SC520_ROMCS2_CTRL, &sc520_mmcr->romcs2ctl);
>> -
>> -       writeb(CONFIG_SYS_SC520_ADDDECCTL, &sc520_mmcr->adddecctl);
>> -       writeb(CONFIG_SYS_SC520_UART1CTL, &sc520_mmcr->uart1ctl);
>> -       writeb(CONFIG_SYS_SC520_UART2CTL, &sc520_mmcr->uart2ctl);
>> -
>> -       writeb(CONFIG_SYS_SC520_SYSARBCTL, &sc520_mmcr->sysarbctl);
>> -       writew(CONFIG_SYS_SC520_SYSARBMENB, &sc520_mmcr->sysarbmenb);
>> -
>> -       /* enable posted-writes */
>> -       writeb(CONFIG_SYS_SC520_HBCTL, &sc520_mmcr->hbctl);
>> -
>> -       return 0;
>> -}
>> -
>> -static void enet_setup_pars(void)
>> -{
>> -       /*
>> -        * PARs 11 and 12 are 2MB SRAM @ 0x19000000
>> -        *
>> -        * These are setup now because older version of U-Boot have them
>> -        * mapped to a different PAR which gets clobbered which prevents
>> -        * using SRAM for warm-booting a new image
>> -        */
>> -       writel(CONFIG_SYS_SC520_SRAM1_PAR, &sc520_mmcr->par[11]);
>> -       writel(CONFIG_SYS_SC520_SRAM2_PAR, &sc520_mmcr->par[12]);
>> -
>> -       /* PARs 0 and 1 are Compact Flash slots (4kB each) */
>> -       writel(CONFIG_SYS_SC520_CF1_PAR, &sc520_mmcr->par[0]);
>> -       writel(CONFIG_SYS_SC520_CF2_PAR, &sc520_mmcr->par[1]);
>> -
>> -       /* PAR 2 is used for Cache-As-RAM */
>> -
>> -       /*
>> -        * PARs 5 through 8 are additional NS16550 UARTS
>> -        * 8 bytes each @ 0x013f8, 0x012f8, 0x011f8 and 0x010f8
>> -        */
>> -       writel(CONFIG_SYS_SC520_UARTA_PAR, &sc520_mmcr->par[5]);
>> -       writel(CONFIG_SYS_SC520_UARTB_PAR, &sc520_mmcr->par[6]);
>> -       writel(CONFIG_SYS_SC520_UARTC_PAR, &sc520_mmcr->par[7]);
>> -       writel(CONFIG_SYS_SC520_UARTD_PAR, &sc520_mmcr->par[8]);
>> -
>> -       /* PARs 9 and 10 are 32MB StrataFlash @ 0x10000000 */
>> -       writel(CONFIG_SYS_SC520_SF1_PAR, &sc520_mmcr->par[9]);
>> -       writel(CONFIG_SYS_SC520_SF2_PAR, &sc520_mmcr->par[10]);
>> -
>> -       /* PAR 13 is 4kB DPRAM @ 0x18100000 (implemented in FPGA) */
>> -       writel(CONFIG_SYS_SC520_DPRAM_PAR, &sc520_mmcr->par[13]);
>> -
>> -       /*
>> -        * PAR 14 is Low Level I/O (LEDs, Hex Switches etc)
>> -        * Already configured in board_init16 (eNET_start16.S)
>> -        *
>> -        * PAR 15 is Boot ROM
>> -        * Already configured in board_init16 (eNET_start16.S)
>> -        */
>> -}
>> -
>> -
>> -int board_early_init_r(void)
>> -{
>> -       /* CPU Speed to 100MHz */
>> -       gd->cpu_clk = 100000000;
>> -
>> -       /* Crystal is 33.000MHz */
>> -       gd->bus_clk = 33000000;
>> -
>> -       return 0;
>> -}
>> -
>> -void show_boot_progress(int val)
>> -{
>> -       uchar led_mask;
>> -
>> -       led_mask = 0x00;
>> -
>> -       if (val < 0)
>> -               led_mask |= LED_ERR_BITMASK;
>> -
>> -       led_mask |= (uchar)(val & 0x001f);
>> -       outb(led_mask, LED_LATCH_ADDRESS);
>> -}
>> -
>> -
>> -int last_stage_init(void)
>> -{
>> -       outb(0x00, LED_LATCH_ADDRESS);
>> -
>> -       register_timer_isr(enet_timer_isr);
>> -
>> -       printf("Serck Controls eNET\n");
>> -
>> -       return 0;
>> -}
>> -
>> -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
>> -{
>> -       if (banknum == 0) {     /* non-CFI boot flash */
>> -               info->portwidth = FLASH_CFI_8BIT;
>> -               info->chipwidth = FLASH_CFI_BY8;
>> -               info->interface = FLASH_CFI_X8;
>> -               return 1;
>> -       } else {
>> -               return 0;
>> -       }
>> -}
>> -
>> -int board_eth_init(bd_t *bis)
>> -{
>> -       return pci_eth_init(bis);
>> -}
>> -
>> -void setup_pcat_compatibility()
>> -{
>> -       /* disable global interrupt mode */
>> -       writeb(0x40, &sc520_mmcr->picicr);
>> -
>> -       /* set all irqs to edge */
>> -       writeb(0x00, &sc520_mmcr->pic_mode[0]);
>> -       writeb(0x00, &sc520_mmcr->pic_mode[1]);
>> -       writeb(0x00, &sc520_mmcr->pic_mode[2]);
>> -
>> -       /*
>> -        *  active low polarity on PIC interrupt pins,
>> -        *  active high polarity on all other irq pins
>> -        */
>> -       writew(0x0000, &sc520_mmcr->intpinpol);
>> -
>> -       /*
>> -        * PIT 0 -> IRQ0
>> -        * RTC -> IRQ8
>> -        * FP error -> IRQ13
>> -        * UART1 -> IRQ4
>> -        * UART2 -> IRQ3
>> -        */
>> -       writeb(SC520_IRQ0, &sc520_mmcr->pit_int_map[0]);
>> -       writeb(SC520_IRQ8, &sc520_mmcr->rtcmap);
>> -       writeb(SC520_IRQ13, &sc520_mmcr->ferrmap);
>> -       writeb(SC520_IRQ4, &sc520_mmcr->uart_int_map[0]);
>> -       writeb(SC520_IRQ3, &sc520_mmcr->uart_int_map[1]);
>> -
>> -       /* Disable all other interrupt sources */
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[0]);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[1]);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[2]);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[1]);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[2]);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->ssimap);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wdtmap);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
>> -       writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
>> -}
>> -
>> -void enet_timer_isr(void)
>> -{
>> -       static long enet_ticks;
>> -
>> -       enet_ticks++;
>> -
>> -       /* Toggle Watchdog every 100ms */
>> -       if ((enet_ticks % 100) == 0)
>> -               hw_watchdog_reset();
>> -
>> -       /* Toggle Run LED every 500ms */
>> -       if ((enet_ticks % 500) == 0)
>> -               enet_toggle_run_led();
>> -}
>> -
>> -void hw_watchdog_reset(void)
>> -{
>> -       /* Watchdog Reset must be atomic */
>> -       long flag = disable_interrupts();
>> -
>> -       if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT)
>> -               sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT;
>> -       else
>> -               sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT;
>> -
>> -       if (flag)
>> -               enable_interrupts();
>> -}
>> -
>> -void enet_toggle_run_led(void)
>> -{
>> -       unsigned char leds_state = inb(LED_LATCH_ADDRESS);
>> -       if (leds_state & LED_RUN_BITMASK)
>> -               outb(leds_state & ~LED_RUN_BITMASK, LED_LATCH_ADDRESS);
>> -       else
>> -               outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS);
>> -}
>> diff --git a/board/eNET/eNET_pci.c b/board/eNET/eNET_pci.c
>> deleted file mode 100644
>> index 5af4ef7..0000000
>> --- a/board/eNET/eNET_pci.c
>> +++ /dev/null
>> @@ -1,128 +0,0 @@
>> -/*
>> - * (C) Copyright 2008,2009
>> - * Graeme Russ, <graeme.russ at gmail.com>
>> - *
>> - * (C) Copyright 2002
>> - * Daniel Engström, Omicron Ceti AB, <daniel at omicron.se>
>> - *
>> - * See file CREDITS for list of people who contributed to this
>> - * project.
>> - *
>> - * This program is free software; you can redistribute it and/or
>> - * modify it under the terms of the GNU General Public License as
>> - * published by the Free Software Foundation; either version 2 of
>> - * the License, or (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
>> - * GNU General Public License for more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> - * MA 02111-1307 USA
>> - */
>> -
>> -#include <common.h>
>> -#include <pci.h>
>> -#include <asm/pci.h>
>> -#include <asm/arch/pci.h>
>> -
>> -static void pci_enet_fixup_irq(struct pci_controller *hose, pci_dev_t
>> dev)
>> -{
>> -       /* a configurable lists of IRQs to steal when we need one */
>> -       static int irq_list[] = {
>> -               CONFIG_SYS_FIRST_PCI_IRQ,
>> -               CONFIG_SYS_SECOND_PCI_IRQ,
>> -               CONFIG_SYS_THIRD_PCI_IRQ,
>> -               CONFIG_SYS_FORTH_PCI_IRQ
>> -       };
>> -       static int next_irq_index;
>> -
>> -       uchar tmp_pin;
>> -       int pin;
>> -
>> -       pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
>> -       pin = tmp_pin;
>> -
>> -       pin -= 1; /* PCI config space use 1-based numbering */
>> -       if (pin == -1)
>> -               return; /* device use no irq */
>> -
>> -       /* map device number +  pin to a pin on the sc520 */
>> -       switch (PCI_DEV(dev)) {
>> -       case 12:        /* First Ethernet Chip */
>> -               pin += SC520_PCI_INTA;
>> -               break;
>> -
>> -       case 13:        /* Second Ethernet Chip */
>> -               pin += SC520_PCI_INTB;
>> -               break;
>> -
>> -       default:
>> -               return;
>> -       }
>> -
>> -       pin &= 3; /* wrap around */
>> -
>> -       if (sc520_pci_ints[pin] == -1) {
>> -               /* re-route one interrupt for us */
>> -               if (next_irq_index > 3)
>> -                       return;
>> -
>> -               if (pci_sc520_set_irq(pin, irq_list[next_irq_index]))
>> -                       return;
>> -
>> -               next_irq_index++;
>> -       }
>> -
>> -       if (-1 != sc520_pci_ints[pin])
>> -               pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
>> -                                          sc520_pci_ints[pin]);
>> -
>> -       printf("fixup_irq: device %d pin %c irq %d\n",
>> -              PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
>> -}
>> -
>> -static struct pci_controller enet_hose = {
>> -       fixup_irq: pci_enet_fixup_irq,
>> -};
>> -
>> -void pci_init_board(void)
>> -{
>> -       pci_sc520_init(&enet_hose);
>> -}
>> -
>> -int pci_set_regions(struct pci_controller *hose)
>> -{
>> -       /* System memory space */
>> -       pci_set_region(hose->regions + 0,
>> -                      SC520_PCI_MEMORY_BUS,
>> -                      SC520_PCI_MEMORY_PHYS,
>> -                      SC520_PCI_MEMORY_SIZE,
>> -                      PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
>> -
>> -       /* ISA/PCI memory space */
>> -       pci_set_region(hose->regions + 1,
>> -                      SC520_ISA_MEM_BUS,
>> -                      SC520_ISA_MEM_PHYS,
>> -                      SC520_ISA_MEM_SIZE,
>> -                      PCI_REGION_MEM);
>> -
>> -       /* PCI I/O space */
>> -       pci_set_region(hose->regions + 2,
>> -                      SC520_PCI_IO_BUS,
>> -                      SC520_PCI_IO_PHYS,
>> -                      SC520_PCI_IO_SIZE,
>> -                      PCI_REGION_IO);
>> -
>> -       /* ISA/PCI I/O space */
>> -       pci_set_region(hose->regions + 3,
>> -                      SC520_ISA_IO_BUS,
>> -                      SC520_ISA_IO_PHYS,
>> -                      SC520_ISA_IO_SIZE,
>> -                      PCI_REGION_IO);
>> -
>> -       return 4;
>> -}
>> diff --git a/board/eNET/eNET_start.S b/board/eNET/eNET_start.S
>> deleted file mode 100644
>> index 0dec7ea..0000000
>> --- a/board/eNET/eNET_start.S
>> +++ /dev/null
>> @@ -1,30 +0,0 @@
>> -/*
>> - * (C) Copyright 2008
>> - * Graeme Russ, graeme.russ at gmail.com.
>> - *
>> - * See file CREDITS for list of people who contributed to this
>> - * project.
>> - *
>> - * This program is free software; you can redistribute it and/or
>> - * modify it under the terms of the GNU General Public License as
>> - * published by the Free Software Foundation; either version 2 of
>> - * the License, or (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
>> - * GNU General Public License for more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> - * MA 02111-1307 USA
>> - */
>> -
>> -#include "hardware.h"
>> -
>> -/* board early intialization */
>> -.globl early_board_init
>> -early_board_init:
>> -       /* No 32-bit board specific initialisation */
>> -       jmp     early_board_init_ret
>> diff --git a/board/eNET/eNET_start16.S b/board/eNET/eNET_start16.S
>> deleted file mode 100644
>> index 5e3f44c..0000000
>> --- a/board/eNET/eNET_start16.S
>> +++ /dev/null
>> @@ -1,87 +0,0 @@
>> -/*
>> - * (C) Copyright 2008
>> - * Graeme Russ, graeme.russ at gmail.com.
>> - *
>> - * See file CREDITS for list of people who contributed to this
>> - * project.
>> - *
>> - * This program is free software; you can redistribute it and/or
>> - * modify it under the terms of the GNU General Public License as
>> - * published by the Free Software Foundation; either version 2 of
>> - * the License, or (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> - * GNU General Public License for more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> - * MA 02111-1307 USA
>> - */
>> -
>> -/*
>> - * 16bit initialization code.
>> - * This code have to map the area of the boot flash
>> - * that is used by U-boot to its final destination.
>> - */
>> -
>> -#include "config.h"
>> -#include "hardware.h"
>> -#include <asm/arch/sc520.h>
>> -#include <generated/asm-offsets.h>
>> -
>> -.text
>> -.section .start16, "ax"
>> -.code16
>> -.globl board_init16
>> -board_init16:
>> -       /* Alias MMCR to 0xdf000 */
>> -       movw    $0xfffc, %dx
>> -       movl    $0x800df0cb, %eax
>> -       outl    %eax, %dx
>> -
>> -       /* Set ds to point to MMCR alias */
>> -       movw    $0xdf00, %ax
>> -       movw    %ax, %ds
>> -
>> -       /* Map PAR for Boot Flash (BOOTCS, 512kB @ 0x380000000) */
>> -       movl    $GENERATED_SC520_PAR14, %edi
>> -       movl    $CONFIG_SYS_SC520_BOOTCS_PAR, %eax
>> -       movl    %eax, (%di)
>> -
>> -       /* Map PAR for LED, Hex Switches (GPCS6, 20 Bytes @ 0x1000) */
>> -       movl    $GENERATED_SC520_PAR15, %edi
>> -       movl    $CONFIG_SYS_SC520_LLIO_PAR, %eax
>> -       movl    %eax, (%di)
>> -
>> -       /* Disabe MMCR alias */
>> -       movw    $0xfffc, %dx
>> -       movl    $0x000000cb, %eax
>> -       outl    %eax, %dx
>> -
>> -       jmp     board_init16_ret
>> -
>> -.section .bios, "ax"
>> -.code16
>> -.globl realmode_reset
>> -.hidden realmode_reset
>> -.type realmode_reset, @function
>> -realmode_reset:
>> -       /* Alias MMCR to 0xdf000 */
>> -       movw    $0xfffc, %dx
>> -       movl    $0x800df0cb, %eax
>> -       outl    %eax, %dx
>> -
>> -       /* Set ds to point to MMCR alias */
>> -       movw    $0xdf00, %ax
>> -       movw    %ax, %ds
>> -
>> -       /* issue software reset thorugh MMCR */
>> -       movl    $0xd72, %edi
>> -       movb    $0x01, %al
>> -       movb    %al, (%di)
>> -
>> -1:     hlt
>> -       jmp     1
>> diff --git a/board/eNET/hardware.h b/board/eNET/hardware.h
>> deleted file mode 100644
>> index dec2cd8..0000000
>> --- a/board/eNET/hardware.h
>> +++ /dev/null
>> @@ -1,36 +0,0 @@
>> -/*
>> - * (C) Copyright 2008
>> - * Graeme Russ, graeme.russ at gmail.com.
>> - *
>> - * See file CREDITS for list of people who contributed to this
>> - * project.
>> - *
>> - * This program is free software; you can redistribute it and/or
>> - * modify it under the terms of the GNU General Public License as
>> - * published by the Free Software Foundation; either version 2 of
>> - * the License, or (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
>> - * GNU General Public License for more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> - * MA 02111-1307 USA
>> - */
>> -
>> -#ifndef HARDWARE_H_
>> -#define HARDWARE_H_
>> -
>> -#define LED_LATCH_ADDRESS      0x1002
>> -#define LED_RUN_BITMASK                0x01
>> -#define LED_1_BITMASK          0x02
>> -#define LED_2_BITMASK          0x04
>> -#define LED_RX_BITMASK         0x08
>> -#define LED_TX_BITMASK         0x10
>> -#define LED_ERR_BITMASK                0x20
>> -#define WATCHDOG_PIO_BIT       0x8000
>> -
>> -#endif /* HARDWARE_H_ */
>> diff --git a/boards.cfg b/boards.cfg
>> index cd220af..b1319aa 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -1123,7 +1123,5 @@ gr_ep2s60                    sparc       leon3
>> -                   gaisler
>>  grsim                        sparc       leon3       -
>> gaisler
>>  gr_xc3s_1500                 sparc       leon3       -
>> gaisler
>>  coreboot-x86                 x86         x86        coreboot
>> chromebook-x86 coreboot    coreboot:SYS_TEXT_BASE=0x01110000
>> -eNET                         x86         x86        eNET                -
>> sc520       eNET:SYS_TEXT_BASE=0x38040000
>> -eNET_SRAM                    x86         x86        eNET                -
>> sc520       eNET:SYS_TEXT_BASE=0x19000000
>>  # Target                     ARCH        CPU         Board name
>> Vendor                SoC         Options
>>
>> ########################################################################################################################
>> diff --git a/include/configs/eNET.h b/include/configs/eNET.h
>> deleted file mode 100644
>> index 28cf95b..0000000
>> --- a/include/configs/eNET.h
>> +++ /dev/null
>> @@ -1,619 +0,0 @@
>> -/*
>> - * (C) Copyright 2008
>> - * Graeme Russ, graeme.russ at gmail.com.
>> - *
>> - * See file CREDITS for list of people who contributed to this
>> - * project.
>> - *
>> - * This program is free software; you can redistribute it and/or
>> - * modify it under the terms of the GNU General Public License as
>> - * published by the Free Software Foundation; either version 2 of
>> - * the License, or (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
>> - * GNU General Public License for more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> - * MA 02111-1307 USA
>> - */
>> -
>> -#include <asm/ibmpc.h>
>> -/*
>> - * board/config.h - configuration options, board specific
>> - */
>> -
>> -#ifndef __CONFIG_H
>> -#define __CONFIG_H
>> -
>> -/*
>> - * High Level Configuration Options
>> - * (easy to change)
>> - */
>> -#define CONFIG_SYS_SC520
>> -#define CONFIG_SYS_SC520_SSI
>> -#define CONFIG_SHOW_BOOT_PROGRESS
>> -#define CONFIG_LAST_STAGE_INIT
>> -
>> -/*-----------------------------------------------------------------------
>> - * Watchdog Configuration
>> - * NOTE: If CONFIG_HW_WATCHDOG is NOT defined, the watchdog jumper on the
>> - * bottom (processor) board MUST be removed!
>> - */
>> -#undef CONFIG_WATCHDOG
>> -#define CONFIG_HW_WATCHDOG
>> -
>> -/*-----------------------------------------------------------------------
>> - * Real Time Clock Configuration
>> - */
>> -#define CONFIG_RTC_MC146818
>> -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS         0
>> -
>> -/*-----------------------------------------------------------------------
>> - * Serial Configuration
>> - */
>> -#define CONFIG_CONS_INDEX                      1
>> -#define CONFIG_SYS_NS16550
>> -#define CONFIG_SYS_NS16550_SERIAL
>> -#define CONFIG_SYS_NS16550_REG_SIZE            1
>> -#define CONFIG_SYS_NS16550_CLK                 1843200
>> -#define CONFIG_BAUDRATE                                9600
>> -#define CONFIG_SYS_BAUDRATE_TABLE              {300, 600, 1200, 2400,
>> 4800, \
>> -                                                9600, 19200, 38400,
>> 115200}
>> -#define CONFIG_SYS_NS16550_COM1                        UART0_BASE
>> -#define CONFIG_SYS_NS16550_COM2                        UART1_BASE
>> -#define CONFIG_SYS_NS16550_COM3                        (0x1000 +
>> UART0_BASE)
>> -#define CONFIG_SYS_NS16550_COM4                        (0x1000 +
>> UART1_BASE)
>> -#define CONFIG_SYS_NS16550_PORT_MAPPED
>> -
>> -/*-----------------------------------------------------------------------
>> - * Video Configuration
>> - */
>> -#undef CONFIG_VIDEO
>> -#undef CONFIG_CFB_CONSOLE
>> -
>> -/*-----------------------------------------------------------------------
>> - * Command line configuration.
>> - */
>> -#include <config_cmd_default.h>
>> -
>> -#define CONFIG_CMD_BDI
>> -#define CONFIG_CMD_BOOTD
>> -#define CONFIG_CMD_CONSOLE
>> -#define CONFIG_CMD_DATE
>> -#define CONFIG_CMD_ECHO
>> -#define CONFIG_CMD_FLASH
>> -#define CONFIG_CMD_FPGA
>> -#define CONFIG_CMD_IMI
>> -#define CONFIG_CMD_IMLS
>> -#define CONFIG_CMD_IRQ
>> -#define CONFIG_CMD_ITEST
>> -#define CONFIG_CMD_LOADB
>> -#define CONFIG_CMD_LOADS
>> -#define CONFIG_CMD_MEMORY
>> -#define CONFIG_CMD_MISC
>> -#define CONFIG_CMD_NET
>> -#undef CONFIG_CMD_NFS
>> -#define CONFIG_CMD_PCI
>> -#define CONFIG_CMD_PING
>> -#define CONFIG_CMD_RUN
>> -#define CONFIG_CMD_SAVEENV
>> -#define CONFIG_CMD_SETGETDCR
>> -#define CONFIG_CMD_SOURCE
>> -#define CONFIG_CMD_XIMG
>> -#define CONFIG_CMD_ZBOOT
>> -
>> -#define CONFIG_BOOTDELAY                       15
>> -#define CONFIG_BOOTARGS
>> "root=/dev/mtdblock0 console=ttyS0,9600"
>> -
>> -#if defined(CONFIG_CMD_KGDB)
>> -#define CONFIG_KGDB_BAUDRATE                   115200
>> -#define CONFIG_KGDB_SER_INDEX                  2
>> -#endif
>> -
>> -/*
>> - * Miscellaneous configurable options
>> - */
>> -#define        CONFIG_SYS_LONGHELP
>> -#define        CONFIG_SYS_PROMPT                       "boot > "
>> -#define        CONFIG_SYS_CBSIZE                       256
>> -#define        CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE
>> + \
>> -                                                sizeof(CONFIG_SYS_PROMPT)
>> + \
>> -                                                16)
>> -#define        CONFIG_SYS_MAXARGS                      16
>> -#define CONFIG_SYS_BARGSIZE                    CONFIG_SYS_CBSIZE
>> -
>> -#define CONFIG_SYS_MEMTEST_START               0x00100000
>> -#define CONFIG_SYS_MEMTEST_END                 0x01000000
>> -#define        CONFIG_SYS_LOAD_ADDR                    0x100000
>> -#define        CONFIG_SYS_HZ                           1000
>> -
>> -/*-----------------------------------------------------------------------
>> - * SDRAM Configuration
>> - */
>> -#define CONFIG_SYS_SDRAM_DRCTMCTL              0x18
>> -#define CONFIG_SYS_SDRAM_REFRESH_RATE          156
>> -#define CONFIG_NR_DRAM_BANKS                   4
>> -
>> -/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
>> -#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
>> -#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
>> -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
>> -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
>> -
>> -/*-----------------------------------------------------------------------
>> - * CPU Features
>> - */
>> -#define CONFIG_SYS_SC520_HIGH_SPEED            0
>> -#define CONFIG_SYS_SC520_RESET
>> -#define CONFIG_SYS_SC520_TIMER
>> -#undef  CONFIG_SYS_GENERIC_TIMER
>> -#define CONFIG_SYS_PCAT_INTERRUPTS
>> -#define CONFIG_SYS_NUM_IRQS                    16
>> -#define CONFIG_SYS_PC_BIOS
>> -#define CONFIG_SYS_PCI_BIOS
>> -#define CONFIG_SYS_X86_REALMODE
>> -#define CONFIG_SYS_X86_ISR_TIMER
>> -
>> -/*-----------------------------------------------------------------------
>> - * Memory organization:
>> - * 32kB Stack
>> - * 16kB Cache-As-RAM @ 0x19200000
>> - * 256kB Monitor
>> - * (128kB + Environment Sector Size) malloc pool
>> - */
>> -#define CONFIG_SYS_STACK_SIZE                  (32 * 1024)
>> -#define CONFIG_SYS_CAR_ADDR                    0x19200000
>> -#define CONFIG_SYS_CAR_SIZE                    (16 * 1024)
>> -#define CONFIG_SYS_MONITOR_BASE
>> CONFIG_SYS_TEXT_BASE
>> -#define CONFIG_SYS_MONITOR_LEN                 (256 * 1024)
>> -#define CONFIG_SYS_MALLOC_LEN                  (CONFIG_ENV_SECT_SIZE + \
>> -                                                128*1024)
>> -/* allow to overwrite serial and ethaddr */
>> -#define CONFIG_ENV_OVERWRITE
>> -
>> -/*-----------------------------------------------------------------------
>> - * FLASH configuration
>> - * 512kB Boot Flash @ 0x38000000 (Monitor @ 38040000)
>> - * 16MB StrataFlash #1 @ 0x10000000
>> - * 16MB StrataFlash #2 @ 0x11000000
>> - */
>> -#define CONFIG_FLASH_CFI_DRIVER
>> -#define CONFIG_FLASH_CFI_LEGACY
>> -#define CONFIG_SYS_FLASH_CFI
>> -#define CONFIG_SYS_MAX_FLASH_BANKS             3
>> -#define CONFIG_SYS_FLASH_BASE                  0x38000000
>> -#define CONFIG_SYS_FLASH_BASE_1                        0x10000000
>> -#define CONFIG_SYS_FLASH_BASE_2                        0x11000000
>> -#define CONFIG_SYS_FLASH_BANKS_LIST            {CONFIG_SYS_FLASH_BASE,
>> \
>> -                                                CONFIG_SYS_FLASH_BASE_1,
>> \
>> -                                                CONFIG_SYS_FLASH_BASE_2}
>> -#define CONFIG_SYS_FLASH_EMPTY_INFO
>> -#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
>> -#define CONFIG_SYS_MAX_FLASH_SECT              128
>> -#define CONFIG_SYS_FLASH_CFI_WIDTH             FLASH_CFI_8BIT
>> -#define CONFIG_SYS_FLASH_LEGACY_512Kx8
>> -#define CONFIG_SYS_FLASH_ERASE_TOUT            2000    /* ms */
>> -#define CONFIG_SYS_FLASH_WRITE_TOUT            2000    /* ms */
>> -
>> -/*-----------------------------------------------------------------------
>> - * Environment configuration
>> - * - Boot flash is 512kB with 64kB sectors
>> - * - StrataFlash is 32MB with 128kB sectors
>> - * - Redundant embedded environment is 25% of the Boot flash
>> - * - Redundant StrataFlash environment is <1% of the StrataFlash
>> - * - Environment is therefore located in StrataFlash
>> - * - Primary copy is located in first sector of first flash
>> - * - Redundant copy is located in second sector of first flash
>> - * - Stack is only 32kB, so environment size is limited to 4kB
>> - */
>> -#define CONFIG_ENV_IS_IN_FLASH
>> -#define CONFIG_ENV_SECT_SIZE                   0x20000
>> -#define CONFIG_ENV_SIZE                                0x01000
>> -#define CONFIG_ENV_ADDR
>> CONFIG_SYS_FLASH_BASE_1
>> -#define CONFIG_ENV_ADDR_REDUND                 (CONFIG_SYS_FLASH_BASE_1 +
>> \
>> -                                                CONFIG_ENV_SECT_SIZE)
>> -#define CONFIG_ENV_SIZE_REDUND                 CONFIG_ENV_SIZE
>> -
>> -/*-----------------------------------------------------------------------
>> - * PCI configuration
>> - */
>> -#define CONFIG_PCI
>> -#define CONFIG_PCI_PNP
>> -#define CONFIG_SYS_FIRST_PCI_IRQ               10
>> -#define CONFIG_SYS_SECOND_PCI_IRQ              9
>> -#define CONFIG_SYS_THIRD_PCI_IRQ               11
>> -#define CONFIG_SYS_FORTH_PCI_IRQ               15
>> -
>> -/*-----------------------------------------------------------------------
>> - * Network device (TRL8100B) support
>> - */
>> -#define CONFIG_RTL8139
>> -
>> -/*-----------------------------------------------------------------------
>> - * BOOTCS Control (for AM29LV040B-120JC)
>> - *
>> - * 000 0 00 0 000 11 0 011 }- 0x0033
>> - * \ / | \| | \ / \| | \ /
>> - *  |  |  | |  |   | |  |
>> - *  |  |  | |  |   | |  +---- 3 Wait States (First Access)
>> - *  |  |  | |  |   | +------- Reserved
>> - *  |  |  | |  |   +--------- 3 Wait States (Subsequent Access)
>> - *  |  |  | |  +------------- Reserved
>> - *  |  |  | +---------------- Non-Paged Mode
>> - *  |  |  +------------------ 8 Bit Wide
>> - *  |  +--------------------- GP Bus
>> - *  +------------------------ Reserved
>> - */
>> -#define CONFIG_SYS_SC520_BOOTCS_CTRL           0x0033
>> -
>> -/*-----------------------------------------------------------------------
>> - * ROMCS Control (for E28F128J3A-150 StrataFlash)
>> - *
>> - * 000 0 01 1 000 01 0 101 }- 0x0615
>> - * \ / | \| | \ / \| | \ /
>> - *  |  |  | |  |   | |  |
>> - *  |  |  | |  |   | |  +---- 5 Wait States (First Access)
>> - *  |  |  | |  |   | +------- Reserved
>> - *  |  |  | |  |   +--------- 1 Wait State (Subsequent Access)
>> - *  |  |  | |  +------------- Reserved
>> - *  |  |  | +---------------- Paged Mode
>> - *  |  |  +------------------ 16 Bit Wide
>> - *  |  +--------------------- GP Bus
>> - *  +------------------------ Reserved
>> - */
>> -#define CONFIG_SYS_SC520_ROMCS1_CTRL           0x0615
>> -#define CONFIG_SYS_SC520_ROMCS2_CTRL           0x0615
>> -
>> -/*-----------------------------------------------------------------------
>> - * SC520 General Purpose Bus configuration
>> - *
>> - * Chip Select Offset          1 Clock Cycle
>> - * Chip Select Pulse Width     8 Clock Cycles
>> - * Chip Select Read Offset     2 Clock Cycles
>> - * Chip Select Read Width      6 Clock Cycles
>> - * Chip Select Write Offset    2 Clock Cycles
>> - * Chip Select Write Width     6 Clock Cycles
>> - * Chip Select Recovery Time   2 Clock Cycles
>> - *
>> - * Timing Diagram (from SC520 Register Set Manual - Order #22005B)
>> - *
>> - *   |<-------------General Purpose Bus Cycle---------------->|
>> - *   |                                                        |
>> - * ----------------------\__________________/------------------
>> - *   |<--(GPCSOFF + 1)-->|<--(GPCSPW + 1)-->|<-(GPCSRT + 1)-> |
>> - *
>> - * ------------------------\_______________/-------------------
>> - *   |<---(GPRDOFF + 1)--->|<-(GPRDW + 1)->|
>> - *
>> - * --------------------------\_______________/-----------------
>> - *   |<----(GPWROFF + 1)---->|<-(GPWRW + 1)->|
>> - *
>> - * ________/-----------\_______________________________________
>> - *   |<--->|<--------->|
>> - *      ^         ^
>> - * (GPALEOFF + 1) |
>> - *                |
>> - *         (GPALEW + 1)
>> - */
>> -#define CONFIG_SYS_SC520_GPCSOFF               0x00
>> -#define CONFIG_SYS_SC520_GPCSPW                        0x07
>> -#define CONFIG_SYS_SC520_GPRDOFF               0x01
>> -#define CONFIG_SYS_SC520_GPRDW                 0x05
>> -#define CONFIG_SYS_SC520_GPWROFF               0x01
>> -#define CONFIG_SYS_SC520_GPWRW                 0x05
>> -#define CONFIG_SYS_SC520_GPCSRT                        0x01
>> -
>> -/*-----------------------------------------------------------------------
>> - * SC520 Programmable I/O configuration
>> - *
>> - * Pin   Mode          Dir.    Description
>> - * ----------------------------------------------------------------------
>> - * PIO0   PIO          Output  Unused
>> - * PIO1   GPBHE#       Output  GP Bus Byte High Enable (active low)
>> - * PIO2   PIO          Output  Auxiliary power output enable
>> - * PIO3   GPAEN                Output  GP Bus Address Enable
>> - * PIO4   PIO          Output  Top Board Enable (active low)
>> - * PIO5   PIO          Output  StrataFlash 16 bit mode (low = 8 bit mode)
>> - * PIO6   PIO          Input   Data output of Power Supply ADC
>> - * PIO7   PIO          Output  Clock input to Power Supply ADC
>> - * PIO8   PIO          Output  Chip Select input of Power Supply ADC
>> - * PIO9   PIO          Output  StrataFlash 1 Reset / Power Down (active
>> low)
>> - * PIO10  PIO          Output  StrataFlash 2 Reset / Power Down (active
>> low)
>> - * PIO11  PIO          Input   StrataFlash 1 Status
>> - * PIO12  PIO          Input   StrataFlash 2 Status
>> - * PIO13  GPIRQ10#     Input   Can Bus / I2C IRQ (active low)
>> - * PIO14  PIO          Input   Low Input Voltage Warning (active low)
>> - * PIO15  PIO          Output  Watchdog (must toggle at least every 1.6s)
>> - * PIO16  PIO          Input   Power Fail
>> - * PIO17  GPIRQ6       Input   Compact Flash 1 IRQ (active low)
>> - * PIO18  GPIRQ5       Input   Compact Flash 2 IRQ (active low)
>> - * PIO19  GPIRQ4#      Input   Dual-Port RAM IRQ (active low)
>> - * PIO20  GPIRQ3       Input   UART D IRQ
>> - * PIO21  GPIRQ2       Input   UART C IRQ
>> - * PIO22  GPIRQ1       Input   UART B IRQ
>> - * PIO23  GPIRQ0       Input   UART A IRQ
>> - * PIO24  GPDBUFOE#    Output  GP Bus Data Bus Buffer Output Enable
>> - * PIO25  PIO          Input   Battery OK Indication
>> - * PIO26  GPMEMCS16#   Input   GP Bus Memory Chip-Select 16-bit access
>> - * PIO27  GPCS0#       Output  SRAM 1 Chip Select
>> - * PIO28  PIO          Input   Top Board UART CTS
>> - * PIO29  PIO          Output  FPGA Program Mode (active low)
>> - * PIO30  PIO          Input   FPGA Initialised (active low)
>> - * PIO31  PIO          Input   FPGA Done (active low)
>> - */
>> -#define CONFIG_SYS_SC520_PIOPFS15_0            0x200a
>> -#define CONFIG_SYS_SC520_PIOPFS31_16           0x0dfe
>> -#define CONFIG_SYS_SC520_PIODIR15_0            0x87bf
>> -#define CONFIG_SYS_SC520_PIODIR31_16           0x2900
>> -
>> -/*-----------------------------------------------------------------------
>> - * PIO Pin defines
>> - */
>> -#define CONFIG_SYS_ENET_AUX_PWR                        0x0004
>> -#define CONFIG_SYS_ENET_TOP_BRD_PWR            0x0010
>> -#define CONFIG_SYS_ENET_SF_WIDTH               0x0020
>> -#define CONFIG_SYS_ENET_PWR_ADC_DATA           0x0040
>> -#define CONFIG_SYS_ENET_PWR_ADC_CLK            0x0080
>> -#define CONFIG_SYS_ENET_PWR_ADC_CS             0x0100
>> -#define CONFIG_SYS_ENET_SF1_MODE               0x0200
>> -#define CONFIG_SYS_ENET_SF2_MODE               0x0400
>> -#define CONFIG_SYS_ENET_SF1_STATUS             0x0800
>> -#define CONFIG_SYS_ENET_SF2_STATUS             0x1000
>> -#define CONFIG_SYS_ENET_PWR_STATUS             0x4000
>> -#define CONFIG_SYS_ENET_WATCHDOG               0x8000
>> -
>> -#define CONFIG_SYS_ENET_PWR_FAIL               0x0001
>> -#define CONFIG_SYS_ENET_BAT_OK                 0x0200
>> -#define CONFIG_SYS_ENET_TOP_BRD_CTS            0x1000
>> -#define CONFIG_SYS_ENET_FPGA_PROG              0x2000
>> -#define CONFIG_SYS_ENET_FPGA_INIT              0x4000
>> -#define CONFIG_SYS_ENET_FPGA_DONE              0x8000
>> -
>> -/*-----------------------------------------------------------------------
>> - * Chip Select Pin Function Select
>> - *
>> - * 1 1 1 1 1 0 0 0 }- 0xf8
>> - * | | | | | | | |
>> - * | | | | | | | +--- Reserved
>> - * | | | | | | +----- GPCS1_SEL = ROMCS1#
>> - * | | | | | +------- GPCS2_SEL = ROMCS2#
>> - * | | | | +--------- GPCS3_SEL = GPCS3
>> - * | | | +----------- GPCS4_SEL = GPCS4
>> - * | | +------------- GPCS5_SEL = GPCS5
>> - * | +--------------- GPCS6_SEL = GPCS6
>> - * +----------------- GPCS7_SEL = GPCS7
>> - */
>> -#define CONFIG_SYS_SC520_CSPFS                 0xf8
>> -
>> -/*-----------------------------------------------------------------------
>> - * Clock Select (CLKTIMER[CLKTEST] pin)
>> - *
>> - * 0 111 00 1 0 }- 0x72
>> - * | \ / \| | |
>> - * |  |   | | +--- Pin Disabled
>> - * |  |   | +----- Pin is an output
>> - * |  |   +------- Reserved
>> - * |  +----------- Disabled (pin stays Low)
>> - * +-------------- Reserved
>> - */
>> -#define CONFIG_SYS_SC520_CLKSEL                        0x72
>> -
>> -/*-----------------------------------------------------------------------
>> - * Address Decode Control
>> - *
>> - * 0 00 0 0 0 0 0 }- 0x00
>> - * | \| | | | | |
>> - * |  | | | | | +--- Integrated UART 1 is enabled
>> - * |  | | | | +----- Integrated UART 2 is enabled
>> - * |  | | | +------- Integrated RTC is enabled
>> - * |  | | +--------- Reserved
>> - * |  | +----------- I/O Hole accesses are forwarded to the external GP
>> bus
>> - * |  +------------- Reserved
>> - * +---------------- Write-protect violations do not generate an IRQ
>> - */
>> -#define CONFIG_SYS_SC520_ADDDECCTL             0x00
>> -
>> -/*-----------------------------------------------------------------------
>> - * UART Control
>> - *
>> - * 00000 1 1 1 }- 0x07
>> - * \___/ | | |
>> - *   |   | | +--- Transmit TC interrupt enable
>> - *   |   | +----- Receive TC interrupt enable
>> - *   |   +------- 1.8432 MHz
>> - *   +----------- Reserved
>> - */
>> -#define CONFIG_SYS_SC520_UART1CTL              0x07
>> -#define CONFIG_SYS_SC520_UART2CTL              0x07
>> -
>> -/*-----------------------------------------------------------------------
>> - * System Arbiter Control
>> - *
>> - * 00000 1 1 0 }- 0x06
>> - * \___/ | | |
>> - *   |   | | +--- Disable PCI Bus Arbiter Grant Time-Out Interrupt
>> - *   |   | +----- The system arbiter operates in concurrent mode
>> - *   |   +------- Park the PCI bus on the last master that acquired the
>> bus
>> - *   +----------- Reserved
>> - */
>> -#define CONFIG_SYS_SC520_SYSARBCTL             0x06
>> -
>> -/*-----------------------------------------------------------------------
>> - * System Arbiter Master Enable
>> - *
>> - * 00000000000 0 0 0 1 1 }- 0x06
>> - * \_________/ | | | | |
>> - *      |      | | | | +--- PCI master REQ0 enabled (Ethernet 1)
>> - *      |      | | | +----- PCI master REQ1 enabled (Ethernet 2)
>> - *      |      | | +------- PCI master REQ2 disabled
>> - *      |      | +--------- PCI master REQ3 disabled
>> - *      |      +----------- PCI master REQ4 disabled
>> - *      +------------------ Reserved
>> - */
>> -#define CONFIG_SYS_SC520_SYSARBMENB            0x0003
>> -
>> -/*-----------------------------------------------------------------------
>> - * System Arbiter Master Enable
>> - *
>> - * 0 0000 0 00 0000 1 000 }- 0x06
>> - * | \__/ | \| \__/ | \_/
>> - * |   |  |  |   |  |  +---- Reserved
>> - * |   |  |  |   |  +------- Enable CPU-to-PCI bus write posting
>> - * |   |  |  |   +---------- Reserved
>> - * |   |  |  +-------------- PCI bus reads to SDRAM are not automatically
>> - * |   |  |                  retried
>> - * |   |  +----------------- Target read FIFOs are not snooped during
>> write
>> - * |   |                     transactions
>> - * |   +-------------------- Reserved
>> - * +------------------------ Deassert the PCI bus reset signal
>> - */
>> -#define CONFIG_SYS_SC520_HBCTL                 0x08
>> -
>> -/*-----------------------------------------------------------------------
>> - * PAR for Boot Flash - 512kB @ 0x38000000, BOOTCS
>> - * 100 0 1 0 1 00000000111 11100000000000 }- 0x8a01f800
>> - * \ / | | | | \----+----/ \-----+------/
>> - *  |  | | | |      |            +---------- Start at 0x38000000
>> - *  |  | | | |      +----------------------- 512kB Region Size
>> - *  |  | | | |                               ((7 + 1) * 64kB)
>> - *  |  | | | +------------------------------ 64kB Page Size
>> - *  |  | | +-------------------------------- Writes Enabled (So it can be
>> - *  |  | |                                   reprogrammed!)
>> - *  |  | +---------------------------------- Caching Disabled
>> - *  |  +------------------------------------ Execution Enabled
>> - *  +--------------------------------------- BOOTCS
>> - */
>> -#define CONFIG_SYS_SC520_BOOTCS_PAR            0x8a01f800
>> -
>> -/*-----------------------------------------------------------------------
>> - * Cache-As-RAM (Targets Boot Flash)
>> - *
>> - * 100 1 0 0 0 0001111 011001001000000000 }- 0x903d9200
>> - * \ / | | | | \--+--/ \-------+--------/
>> - *  |  | | | |    |            +------------ Start at 0x19200000
>> - *  |  | | | |    +------------------------- 64k Region Size
>> - *  |  | | | |                               ((15 + 1) * 4kB)
>> - *  |  | | | +------------------------------ 4kB Page Size
>> - *  |  | | +-------------------------------- Writes Enabled
>> - *  |  | +---------------------------------- Caching Enabled
>> - *  |  +------------------------------------ Execution Prevented
>> - *  +--------------------------------------- BOOTCS
>> - */
>> -#define CONFIG_SYS_SC520_CAR_PAR               0x903d9200
>> -
>> -/*-----------------------------------------------------------------------
>> - * PAR for Low Level I/O (LEDs, Hex Switches etc) - 33 Bytes @ 0x1000,
>> GPCS6
>> - *
>> - * 001 110 0 000100000 0001000000000000 }- 0x38201000
>> - * \ / \ / | \---+---/ \------+-------/
>> - *  |   |  |     |            +----------- Start at 0x00001000
>> - *  |   |  |     +------------------------ 33 Bytes (0x20 + 1)
>> - *  |   |  +------------------------------ Ignored
>> - *  |   +--------------------------------- GPCS6
>> - *  +------------------------------------- GP Bus I/O
>> - */
>> -#define CONFIG_SYS_SC520_LLIO_PAR              0x38201000
>> -
>> -/*-----------------------------------------------------------------------
>> - * PAR for Compact Flash Port #1 - 4kB @ 0x200000000, CS5
>> - * PAR for Compact Flash Port #2 - 4kB @ 0x200010000, CS7
>> - *
>> - * 010 101 0 0000000 100000000000000000 }- 0x54020000
>> - * 010 111 0 0000000 100000000000000001 }- 0x5c020001
>> - * \ / \ / | \--+--/ \-------+--------/
>> - *  |   |  |    |            +------------ Start at 0x200000000
>> - *  |   |  |    |                                   0x200010000
>> - *  |   |  |    +------------------------- 4kB Region Size
>> - *  |   |  |                               ((0 + 1) * 4kB)
>> - *  |   |  +------------------------------ 4k Page Size
>> - *  |   +--------------------------------- GPCS5
>> - *  |                                      GPCS7
>> - *  +------------------------------------- GP Bus Memory
>> - */
>> -#define CONFIG_SYS_SC520_CF1_PAR               0x54020000
>> -#define CONFIG_SYS_SC520_CF2_PAR               0x5c020001
>> -
>> -/*-----------------------------------------------------------------------
>> - * PAR for Extra 16550 UART A - 8 bytes @ 0x013f8, GPCS0
>> - * PAR for Extra 16550 UART B - 8 bytes @ 0x012f8, GPCS3
>> - * PAR for Extra 16550 UART C - 8 bytes @ 0x011f8, GPCS4
>> - * PAR for Extra 16550 UART D - 8 bytes @ 0x010f8, GPCS5
>> - *
>> - * 001 000 0 000000111 0001001111111000 }- 0x200713f8
>> - * 001 011 0 000000111 0001001011111000 }- 0x2c0712f8
>> - * 001 011 0 000000111 0001001011111000 }- 0x300711f8
>> - * 001 011 0 000000111 0001001011111000 }- 0x340710f8
>> - * \ / \ / | \---+---/ \------+-------/
>> - *  |   |  |     |            +----------- Start at 0x013f8
>> - *  |   |  |     |                                  0x012f8
>> - *  |   |  |     |                                  0x011f8
>> - *  |   |  |     |                                  0x010f8
>> - *  |   |  |     +------------------------ 33 Bytes (32 + 1)
>> - *  |   |  +------------------------------ Ignored
>> - *  |   +--------------------------------- GPCS6
>> - *  +------------------------------------- GP Bus I/O
>> - */
>> -#define CONFIG_SYS_SC520_UARTA_PAR             0x200713f8
>> -#define CONFIG_SYS_SC520_UARTB_PAR             0x2c0712f8
>> -#define CONFIG_SYS_SC520_UARTC_PAR             0x300711f8
>> -#define CONFIG_SYS_SC520_UARTD_PAR             0x340710f8
>> -
>> -/*-----------------------------------------------------------------------
>> - * PAR for StrataFlash #1 - 16MB @ 0x10000000, ROMCS1
>> - * PAR for StrataFlash #2 - 16MB @ 0x11000000, ROMCS2
>> - *
>> - * 101 0 1 0 1 00011111111 01000000000000 }- 0xaa3fd000
>> - * 110 0 1 0 1 00011111111 01000100000000 }- 0xca3fd100
>> - * \ / | | | | \----+----/ \-----+------/
>> - *  |  | | | |      |            +---------- Start at 0x10000000
>> - *  |  | | | |      |                                 0x11000000
>> - *  |  | | | |      +----------------------- 16MB Region Size
>> - *  |  | | | |                               ((255 + 1) * 64kB)
>> - *  |  | | | +------------------------------ 64kB Page Size
>> - *  |  | | +-------------------------------- Writes Enabled
>> - *  |  | +---------------------------------- Caching Disabled
>> - *  |  +------------------------------------ Execution Enabled
>> - *  +--------------------------------------- ROMCS1
>> - *                                           ROMCS2
>> - */
>> -#define CONFIG_SYS_SC520_SF1_PAR               0xaa3fd000
>> -#define CONFIG_SYS_SC520_SF2_PAR               0xca3fd100
>> -
>> -/*-----------------------------------------------------------------------
>> - * PAR for SRAM #1 - 1MB @ 0x19000000, GPCS0
>> - * PAR for SRAM #2 - 1MB @ 0x19100000, GPCS3
>> - *
>> - * 010 000 1 00000001111 01100100000000 }- 0x4203d900
>> - * 010 011 1 00000001111 01100100010000 }- 0x4e03d910
>> - * \ / \ / | \----+----/ \-----+------/
>> - *  |   |  |      |            +---------- Start at 0x19000000
>> - *  |   |  |      |                                 0x19100000
>> - *  |   |  |      +----------------------- 1MB Region Size
>> - *  |   |  |                               ((15 + 1) * 64kB)
>> - *  |   |  +------------------------------ 64kB Page Size
>> - *  |   +--------------------------------- GPCS0
>> - *  |                                      GPCS3
>> - *  +------------------------------------- GP Bus Memory
>> - */
>> -#define CONFIG_SYS_SC520_SRAM1_PAR             0x4203d900
>> -#define CONFIG_SYS_SC520_SRAM2_PAR             0x4e03d910
>> -
>> -/*-----------------------------------------------------------------------
>> - * PAR for Dual-Port RAM - 4kB @ 0x18100000, GPCS4
>> - *
>> - * 010 100 0 00000000 11000000100000000 }- 0x50018100
>> - * \ / \ / | \---+--/ \-------+-------/
>> - *  |   |  |     |            +----------- Start at 0x18100000
>> - *  |   |  |     +------------------------ 4kB Region Size
>> - *  |   |  |                               ((0 + 1) * 4kB)
>> - *  |   |  +------------------------------ 4kB Page Size
>> - *  |   +--------------------------------- GPCS4
>> - *  +------------------------------------- GP Bus Memory
>> - */
>> -#define CONFIG_SYS_SC520_DPRAM_PAR             0x50018100
>> -
>> -#endif /* __CONFIG_H */
>> --
>> 1.8.1
>>
>


More information about the U-Boot mailing list