[U-Boot] [PATCH 1/3] arm:goni: Adjustment of configuration for goni target

a.wlodarczyk at samsung.com a.wlodarczyk at samsung.com
Mon Feb 18 11:18:04 CET 2013


From: Arkadiusz Wlodarczyk <a.wlodarczyk at samsung.com>

Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarczyk at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Tested-by: Arkadiusz Wlodarczyk <a.wlodarczyk at samsung.com>
Cc: Minkyu Kang <mk7.kang at samsung.com>
---
Changes
This change encompasses set of adjustments in the configuration
of the u-boot in the include/configs/s5p_goni.h, particularly
change of rootfs type, change in kernel booting method and added DFU
support. All those changes are connected with adjusting of existing
goni configuration to latest changes in kernel.
---
 board/samsung/goni/goni.c  |    7 +++++++
 include/configs/s5p_goni.h |   37 ++++++++++++++++++++++++++++++++-----
 2 files changed, 39 insertions(+), 5 deletions(-)

diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index ff76963..3c53106 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -155,4 +155,11 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
 	.regs_otg = S5PC110_OTG_BASE,
 	.usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
 };
+
+void board_usb_init(void)
+{
+	debug("USB_udc_probe\n");
+	s3c_udc_probe(&s5pc110_otg_data);
+}
+
 #endif
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 56e8347..8a824c7 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -86,6 +86,17 @@
 #define CONFIG_CMD_ONENAND
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_MMC
+#define CONFIG_CMD_DFU
+
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
 
 #define CONFIG_BOOTDELAY		1
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -105,9 +116,13 @@
 				",60m(qboot)"\
 				",-(UBI)\0"
 
+#define CONFIG_DFU_ALT \
+	"u-boot mmc 80 400;" \
+	"uImage fat 0 2\0" \
+
 #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
 
-#define CONFIG_BOOTCOMMAND	"run ubifsboot"
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
 
 #define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
 
@@ -137,7 +152,7 @@
 		"onenand erase 0x01560000 0x1eaa0000;" \
 		"onenand write 0x32000000 0x1260000 0x8C0000\0" \
 	"bootk=" \
-		"onenand read 0x30007FC0 0xc00000 0x600000;" \
+		"run loaduimage;" \
 		"bootm 0x30007FC0\0" \
 	"flashboot=" \
 		"set bootargs root=/dev/mtdblock${bootblock} " \
@@ -156,21 +171,28 @@
 		"set bootargs " CONFIG_RAMDISK_BOOT \
 		" initrd=0x33000000,8M ramdisk=8192\0" \
 	"mmcboot=" \
-		"set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"rootfstype=${rootfstype}" \
 		CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
 		CONFIG_COMMON_BOOT "; run bootk\0" \
 	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
 	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 	"verify=n\0" \
-	"rootfstype=cramfs\0" \
+	"rootfstype=ext4\0" \
 	"console=" CONFIG_DEFAULT_CONSOLE \
 	"mtdparts=" MTDPARTS_DEFAULT \
 	"meminfo=mem=80M mem=256M at 0x40000000 mem=128M at 0x50000000\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=5\0" \
 	"mmcblk=/dev/mmcblk1p1\0" \
 	"bootblock=9\0" \
 	"ubiblock=8\0" \
 	"ubi=enabled\0" \
-	"opts=always_resume=1"
+	"opts=always_resume=1\0" \
+	"dfu_alt_info=" CONFIG_DFU_ALT
+
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
@@ -211,6 +233,10 @@
 
 #define CONFIG_DOS_PARTITION		1
 
+/* FAT */
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
 
 #define CONFIG_SYS_CACHELINE_SIZE       64
@@ -233,5 +259,6 @@
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
 
 #endif	/* __CONFIG_H */
-- 
1.7.1



More information about the U-Boot mailing list