[U-Boot] [PATCH] powerpc/p1022ds: Add support for NAND and NAND boot using SPL
Scott Wood
scottwood at freescale.com
Mon Feb 18 20:26:14 CET 2013
On 02/18/2013 01:24:44 PM, McClintock Matthew-B29882 wrote:
> On Mon, Feb 18, 2013 at 1:18 PM, Scott Wood <scottwood at freescale.com>
> wrote:
> > On 02/18/2013 01:07:53 PM, Matthew McClintock wrote:
> >>
> >> @@ -118,6 +172,7 @@
> >> * Localbus non-cacheable
> >> * 0xe000_0000 0xe80f_ffff Promjet/free 128M
> non-cacheable
> >> * 0xe800_0000 0xefff_ffff FLASH 128M
> non-cacheable
> >> + * 0xff80_0000 0xff80_1fff NAND 8K
> non-cacheable
> >> * 0xffdf_0000 0xffdf_7fff PIXIS 32K
> non-cacheable
> >> TLB0
> >> * 0xffd0_0000 0xffd0_3fff L1 for stack 16K
> Cacheable TLB0
> >> * 0xffe0_0000 0xffef_ffff CCSR 1M
> non-cacheable
> >
> >
> > This says 8K...
> >
> >
> >> +/* NAND flash config */
> >> +#define CONFIG_SYS_NAND_BR_PRELIM
> >> (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
> >> + | (2<<BR_DECC_SHIFT) /* Use HW
> ECC */ \
> >> + | BR_PS_8 /* Port
> Size = 8
> >> bit */ \
> >> + | BR_MS_FCM /* MSEL =
> FCM */ \
> >> + | BR_V) /* valid */
> >> +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /*
> length
> >> 256K */ \
> >> + | OR_FCM_PGS /* Large
> Page*/ \
> >> + | OR_FCM_CSCT \
> >> + | OR_FCM_CST \
> >> + | OR_FCM_CHT \
> >> + | OR_FCM_SCY_1 \
> >> + | OR_FCM_TRLX \
> >> + | OR_FCM_EHTR)
> >
> >
> > ...this says 256K.
> >
> > IIRC the minimum for localbus is 32K.
>
> And the law is 8K and TLB is 16K - should I go with 32K for
> everything? However, I don't think 32K TLB works on this part.
You don't need to create a 32K TLB, but the documented address map
should agree with what you put in the actual hardware (and LAWs should
agree with ORn/BRn).
-Scott
More information about the U-Boot
mailing list