[U-Boot] [PATCH v2 04/11] Blackfin: bf60x: add dma support
Sonic Zhang
sonic.adi at gmail.com
Tue Feb 19 08:00:59 CET 2013
From: Bob Liu <lliubbo at gmail.com>
Add dma support for bf60x.
Signed-off-by: Bob Liu <lliubbo at gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang at analog.com>
---
arch/blackfin/include/asm/dma.h | 81 ++++++++++++------
arch/blackfin/include/asm/mach-common/bits/dma.h | 54 +++++++++++-
arch/blackfin/lib/string.c | 97 ++++++++++++----------
3 files changed, 156 insertions(+), 76 deletions(-)
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index 21ff1cf..ef1db6e 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -8,7 +8,12 @@
#ifndef _BLACKFIN_DMA_H_
#define _BLACKFIN_DMA_H_
+#include <linux/types.h>
+#ifdef __ADSPBF60x__
+#include <asm/mach-common/bits/dde.h>
+#else
#include <asm/mach-common/bits/dma.h>
+#endif
struct dmasg_large {
void *next_desc_addr;
@@ -30,46 +35,70 @@ struct dmasg {
} __attribute__((packed));
struct dma_register {
+#ifdef __ADSPBF60x__
+ void *next_desc_ptr; /* DMA Next Descriptor Pointer register */
+ u32 start_addr; /* DMA Start address register */
+ u32 config; /* DMA Configuration register */
+
+ u32 x_count; /* DMA x_count register */
+ s32 x_modify; /* DMA x_modify register */
+ u32 y_count; /* DMA y_count register */
+ s32 y_modify; /* DMA y_modify register */
+ u32 __pad0[2];
+
+ void *curr_desc_ptr; /* DMA Curr Descriptor Pointer register */
+ void *prev_desc_ptr; /* DMA Prev Descriptor Pointer register */
+ void *curr_addr; /* DMA Current Address Pointer register */
+ u32 status; /* DMA irq status register */
+ u32 curr_x_count; /* DMA Current x-count register */
+ u32 curr_y_count; /* DMA Current y-count register */
+ u32 __pad1[2];
+
+ u32 bw_limit; /* DMA Bandwidth Limit Count */
+ u32 curr_bw_limit; /* DMA curr Bandwidth Limit Count */
+ u32 bw_monitor; /* DMA Bandwidth Monitor Count */
+ u32 curr_bw_monitor; /* DMA curr Bandwidth Monitor Count */
+#else
void *next_desc_ptr; /* DMA Next Descriptor Pointer register */
- unsigned long start_addr; /* DMA Start address register */
+ u32 start_addr; /* DMA Start address register */
- unsigned short cfg; /* DMA Configuration register */
- unsigned short dummy1; /* DMA Configuration register */
+ u16 config; /* DMA Configuration register */
+ u16 dummy1; /* DMA Configuration register */
- unsigned long reserved;
+ u32 reserved;
- unsigned short x_count; /* DMA x_count register */
- unsigned short dummy2;
+ u16 x_count; /* DMA x_count register */
+ u16 dummy2;
- short x_modify; /* DMA x_modify register */
- unsigned short dummy3;
+ s16 x_modify; /* DMA x_modify register */
+ u16 dummy3;
- unsigned short y_count; /* DMA y_count register */
- unsigned short dummy4;
+ u16 y_count; /* DMA y_count register */
+ u16 dummy4;
- short y_modify; /* DMA y_modify register */
- unsigned short dummy5;
+ s16 y_modify; /* DMA y_modify register */
+ u16 dummy5;
- void *curr_desc_ptr; /* DMA Current Descriptor Pointer
- register */
- unsigned long curr_addr_ptr; /* DMA Current Address Pointer
- register */
- unsigned short irq_status; /* DMA irq status register */
- unsigned short dummy6;
+ void *curr_desc_ptr; /* DMA Current Descriptor Pointer register */
- unsigned short peripheral_map; /* DMA peripheral map register */
- unsigned short dummy7;
+ u32 curr_addr_ptr; /* DMA Current Address Pointer register */
- unsigned short curr_x_count; /* DMA Current x-count register */
- unsigned short dummy8;
+ u16 status; /* DMA irq status register */
+ u16 dummy6;
- unsigned long reserved2;
+ u16 peripheral_map; /* DMA peripheral map register */
+ u16 dummy7;
- unsigned short curr_y_count; /* DMA Current y-count register */
- unsigned short dummy9;
+ u16 curr_x_count; /* DMA Current x-count register */
+ u16 dummy8;
- unsigned long reserved3;
+ u32 reserved2;
+ u16 curr_y_count; /* DMA Current y-count register */
+ u16 dummy9;
+
+ u32 reserved3;
+#endif
};
#endif
diff --git a/arch/blackfin/include/asm/mach-common/bits/dma.h b/arch/blackfin/include/asm/mach-common/bits/dma.h
index 136313e..ac426ad 100644
--- a/arch/blackfin/include/asm/mach-common/bits/dma.h
+++ b/arch/blackfin/include/asm/mach-common/bits/dma.h
@@ -9,14 +9,54 @@
#define DMAEN 0x0001 /* DMA Channel Enable */
#define WNR 0x0002 /* Channel Direction (W/R*) */
#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
+
+#ifdef CONFIG_BF60x
+
+#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */
+#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */
+#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */
+#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */
+#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */
+#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */
+#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */
+#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */
+#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */
+#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */
+#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */
+#define DI_EN_X 0x00100000 /* Data Int Enable in X count */
+#define DI_EN_Y 0x00200000 /* Data Int Enable in Y count */
+#define DI_EN_P 0x00300000 /* Data Int Enable in Peri */
+#define DI_EN DI_EN_X /* Data Int Enable */
+#define NDSIZE_0 0x00000000 /* Next Desc Size = 0 */
+#define NDSIZE_1 0x00010000 /* Next Desc Size = 1 */
+#define NDSIZE_2 0x00020000 /* Next Desc Size = 2 */
+#define NDSIZE_3 0x00030000 /* Next Desc Size = 3 */
+#define NDSIZE_4 0x00040000 /* Next Desc Size = 4 */
+#define NDSIZE_5 0x00050000 /* Next Desc Size = 5 */
+#define NDSIZE_6 0x00060000 /* Next Desc Size = 6 */
+#define NDSIZE 0x00070000 /* Next Desc Size */
+#define NDSIZE_OFFSET 16 /* Next Desc Size Offset */
+#define DMAFLOW_LIST 0x00004000 /* Desc List Mode */
+#define DMAFLOW_ARRAY 0x00005000 /* Desc Array Mode */
+#define DMAFLOW_LIST_DEMAND 0x00006000 /* Desc Demand List Mode */
+#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Desc Demand Array Mode */
+#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Run (DFETCH) */
+#define DMA_RUN 0x00000200 /* DMA Channel Run */
+#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Run (WAIT TRIG)*/
+#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Run (WAIT ACK) */
+
+#else
+
#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
+#define PSIZE_16 WDSIZE_16
+#define PSIZE_32 WDSIZE_32
#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
#define RESTART 0x0020 /* DMA Buffer Clear */
#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
#define DI_EN 0x0080 /* Data Interrupt Enable */
#define NDSIZE 0x0F00 /* Next Descriptor bitmask */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 */
#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
@@ -26,14 +66,13 @@
#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define FLOW_STOP 0x0000 /* Stop Mode */
-#define FLOW_AUTO 0x1000 /* Autobuffer Mode */
#define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */
#define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
#define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
#define DMAEN_P 0 /* Channel Enable */
#define WNR_P 1 /* Channel Direction (W/R*) */
+#define WDSIZE_P 2 /* Transfer Word Size */
#define DMA2D_P 4 /* 2D/1D* Mode */
#define RESTART_P 5 /* Restart */
#define DI_SEL_P 6 /* Data Interrupt Select */
@@ -45,14 +84,19 @@
#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
+#endif
+#define DMAFLOW 0x7000 /* Flow Control */
+#define FLOW_STOP 0x0000 /* Stop Mode */
+#define FLOW_AUTO 0x1000 /* Autobuffer Mode */
+
#define DMA_DONE_P 0 /* DMA Done Indicator */
#define DMA_ERR_P 1 /* DMA Error Indicator */
#define DFETCH_P 2 /* Descriptor Fetch Indicator */
#define DMA_RUN_P 3 /* DMA Running Indicator */
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
-#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
-#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */
+#define CTYPE 0x0040 /* DMA Channel Type (Mem/Peri) */
+#define CTYPE_P 6 /* DMA Channel Type BIT POSITION */
#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
#endif
diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c
index e344d3b..44d8c6d 100644
--- a/arch/blackfin/lib/string.c
+++ b/arch/blackfin/lib/string.c
@@ -29,7 +29,7 @@
#include <config.h>
#include <asm/blackfin.h>
#include <asm/io.h>
-#include <asm/mach-common/bits/dma.h>
+#include <asm/dma.h>
char *strcpy(char *dest, const char *src)
{
@@ -117,81 +117,88 @@ int strncmp(const char *cs, const char *ct, size_t count)
return __res1;
}
-#ifdef bfin_write_MDMA1_D0_IRQ_STATUS
-# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS
-# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR
-# define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA1_D0_X_COUNT
-# define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA1_D0_X_MODIFY
-# define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA1_D0_CONFIG
-# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR
-# define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA1_S0_X_COUNT
-# define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA1_S0_X_MODIFY
-# define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA1_S0_CONFIG
-# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS
-# define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA1_D0_IRQ_STATUS
+#ifdef MDMA1_D0_NEXT_DESC_PTR
+# define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR
+# define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR
#endif
+
+static void dma_calc_size(unsigned long ldst, unsigned long lsrc, size_t count,
+ unsigned long *dshift, unsigned long *bpos)
+{
+ unsigned long limit;
+
+#ifdef MSIZE
+ limit = 6;
+ *dshift = MSIZE_P;
+#else
+ limit = 3;
+ *dshift = WDSIZE_P;
+#endif
+
+ *bpos = min(limit, ffs(ldst | lsrc | count)) - 1;
+}
+
/* This version misbehaves for count values of 0 and 2^16+.
* Perhaps we should detect that ? Nowhere do we actually
* use dma memcpy for those types of lengths though ...
*/
void dma_memcpy_nocache(void *dst, const void *src, size_t count)
{
- uint16_t wdsize, mod;
+ struct dma_register *mdma_d0 = (void *)MDMA_D0_NEXT_DESC_PTR;
+ struct dma_register *mdma_s0 = (void *)MDMA_S0_NEXT_DESC_PTR;
+ unsigned long ldst = (unsigned long)dst;
+ unsigned long lsrc = (unsigned long)src;
+ unsigned long dshift, bpos;
+ uint32_t dsize, mod;
/* Disable DMA in case it's still running (older u-boot's did not
* always turn them off). Do it before the if statement below so
* we can be cheap and not do a SSYNC() due to the forced abort.
*/
- bfin_write_MDMA_D0_CONFIG(0);
- bfin_write_MDMA_S0_CONFIG(0);
- bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR);
+ bfin_write(&mdma_d0->config, 0);
+ bfin_write(&mdma_s0->config, 0);
+ bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR);
/* Scratchpad cannot be a DMA source or destination */
- if (((unsigned long)src >= L1_SRAM_SCRATCH &&
- (unsigned long)src < L1_SRAM_SCRATCH_END) ||
- ((unsigned long)dst >= L1_SRAM_SCRATCH &&
- (unsigned long)dst < L1_SRAM_SCRATCH_END))
+ if ((lsrc >= L1_SRAM_SCRATCH && lsrc < L1_SRAM_SCRATCH_END) ||
+ (ldst >= L1_SRAM_SCRATCH && ldst < L1_SRAM_SCRATCH_END))
hang();
- if (((unsigned long)dst | (unsigned long)src | count) & 0x1) {
- wdsize = WDSIZE_8;
- mod = 1;
- } else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) {
- wdsize = WDSIZE_16;
- count >>= 1;
- mod = 2;
- } else {
- wdsize = WDSIZE_32;
- count >>= 2;
- mod = 4;
- }
+ dma_calc_size(ldst, lsrc, count, &dshift, &bpos);
+ dsize = bpos << dshift;
+ count >>= bpos;
+ mod = 1 << bpos;
+
+#ifdef PSIZE
+ dsize |= min(3, bpos) << PSIZE_P;
+#endif
/* Copy sram functions from sdram to sram */
/* Setup destination start address */
- bfin_write_MDMA_D0_START_ADDR(dst);
+ bfin_write(&mdma_d0->start_addr, ldst);
/* Setup destination xcount */
- bfin_write_MDMA_D0_X_COUNT(count);
+ bfin_write(&mdma_d0->x_count, count);
/* Setup destination xmodify */
- bfin_write_MDMA_D0_X_MODIFY(mod);
+ bfin_write(&mdma_d0->x_modify, mod);
/* Setup Source start address */
- bfin_write_MDMA_S0_START_ADDR(src);
+ bfin_write(&mdma_s0->start_addr, lsrc);
/* Setup Source xcount */
- bfin_write_MDMA_S0_X_COUNT(count);
+ bfin_write(&mdma_s0->x_count, count);
/* Setup Source xmodify */
- bfin_write_MDMA_S0_X_MODIFY(mod);
+ bfin_write(&mdma_s0->x_modify, mod);
/* Enable source DMA */
- bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN);
- bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN);
+ bfin_write(&mdma_s0->config, dsize | DMAEN);
+ bfin_write(&mdma_d0->config, dsize | DMAEN | WNR | DI_EN);
SSYNC();
- while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
+ while (!(bfin_read(&mdma_d0->status) & DMA_DONE))
continue;
- bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR);
- bfin_write_MDMA_D0_CONFIG(0);
- bfin_write_MDMA_S0_CONFIG(0);
+ bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR);
+ bfin_write(&mdma_d0->config, 0);
+ bfin_write(&mdma_s0->config, 0);
}
/* We should do a dcache invalidate on the destination after the dma, but since
* we lack such hardware capability, we'll flush/invalidate the destination
--
1.7.0.4
More information about the U-Boot
mailing list