[U-Boot] [PATCH V2 5/6] i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO

[Eric Nelson]

Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
---
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 0395357..9494e41 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -105,6 +105,9 @@ enum {
 	MX6_PAD_KEY_COL3__GPIO_4_12		= IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0),
 	MX6_PAD_KEY_ROW3__I2C2_SDA		= IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0),
 	MX6_PAD_KEY_ROW3__GPIO_4_13		= IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0),
+	MX6_PAD_NANDF_CS1__GPIO_6_14		= IOMUX_PAD(0x0660, 0x0278, 5, 0x0000, 0, 0),
+	MX6_PAD_NANDF_CS2__GPIO_6_15		= IOMUX_PAD(0x0664, 0x027C, 5, 0x0000, 0, 0),
+	MX6_PAD_NANDF_CS3__GPIO_6_16		= IOMUX_PAD(0x0668, 0x0280, 5, 0x0000, 0, 0),
 	MX6_PAD_NANDF_D1__GPIO_2_1		= IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0),
 	MX6_PAD_NANDF_D2__GPIO_2_2		= IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0),
 	MX6_PAD_NANDF_D3__GPIO_2_3		= IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0),
-- 
1.7.9.5