[U-Boot] [PATCH 1/9 v9] EXYNOS5: TMU: Add driver for Thermal Management Unit
Minkyu Kang
mk7.kang at samsung.com
Wed Feb 20 09:36:40 CET 2013
Dear Akshay,
On 06/02/13 22:18, Akshay Saraswat wrote:
> Adding Exynos Thermal Management Unit driver to monitor SOC
> temperature and take actions corresponding to states of TMU.
>
> Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
> Acked-by: Simon Glass <sjg at chromium.org>
> ---
> Changes since v8:
> - None.
>
> arch/arm/include/asm/arch-exynos/exynos-tmu.h | 58 +++++
> drivers/power/Makefile | 1 +
> drivers/power/exynos-tmu.c | 302 +++++++++++++++++++++++++
> include/tmu.h | 46 ++++
> 4 files changed, 407 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-exynos/exynos-tmu.h
> create mode 100644 drivers/power/exynos-tmu.c
> create mode 100644 include/tmu.h
>
> diff --git a/arch/arm/include/asm/arch-exynos/exynos-tmu.h b/arch/arm/include/asm/arch-exynos/exynos-tmu.h
> new file mode 100644
> index 0000000..c79a520
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-exynos/exynos-tmu.h
just tmu.h please.
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + * Akshay Saraswat <akshay.s at samsung.com>
> + *
> + * EXYNOS - Thermal Management Unit
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __ASM_ARCH_TMU_H
> +#define __ASM_ARCH_TMU_H
> +
> +struct tmu_reg {
is it for exynos5? or exynos4? or both?
> + unsigned triminfo;
> + unsigned rsvd1;
> + unsigned rsvd2;
> + unsigned rsvd3;
> + unsigned rsvd4;
> + unsigned triminfo_control;
> + unsigned rsvd5;
> + unsigned rsvd6;
> + unsigned tmu_control;
> + unsigned rsvd7;
> + unsigned tmu_status;
> + unsigned sampling_internal;
> + unsigned counter_value0;
> + unsigned counter_value1;
> + unsigned rsvd8;
> + unsigned rsvd9;
> + unsigned current_temp;
> + unsigned rsvd10;
> + unsigned rsvd11;
> + unsigned rsvd12;
> + unsigned threshold_temp_rise;
> + unsigned threshold_temp_fall;
> + unsigned rsvd13;
> + unsigned rsvd14;
> + unsigned past_temp3_0;
> + unsigned past_temp7_4;
> + unsigned past_temp11_8;
> + unsigned past_temp15_12;
> + unsigned inten;
> + unsigned intstat;
> + unsigned intclear;
> + unsigned rsvd15;
> + unsigned emul_con;
> +};
> +#endif /* __ASM_ARCH_THERMAL_H */
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 8c71901..1dac16a 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk
>
> LIB := $(obj)libpower.o
>
> +COBJS-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
> COBJS-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
> COBJS-$(CONFIG_TPS6586X_POWER) += tps6586x.o
> COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o
> diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c
> new file mode 100644
> index 0000000..b010883
> --- /dev/null
> +++ b/drivers/power/exynos-tmu.c
> @@ -0,0 +1,302 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + * Akshay Saraswat <akshay.s at samsung.com>
> + *
> + * EXYNOS - Thermal Management Unit
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <fdtdec.h>
> +#include <tmu.h>
> +#include <asm/arch/exynos-tmu.h>
> +
> +#define TRIMINFO_RELOAD 1
> +#define CORE_EN 1
> +
> +#define INTEN_RISE0 1
> +#define INTEN_RISE1 (1 << 4)
> +#define INTEN_RISE2 (1 << 8)
> +#define INTEN_FALL0 (1 << 16)
> +#define INTEN_FALL1 (1 << 20)
> +#define INTEN_FALL2 (1 << 24)
> +
> +#define TRIM_INFO_MASK 0xff
> +
> +#define INTCLEAR_RISE0 1
> +#define INTCLEAR_RISE1 (1 << 4)
> +#define INTCLEAR_RISE2 (1 << 8)
> +#define INTCLEAR_FALL0 (1 << 16)
> +#define INTCLEAR_FALL1 (1 << 20)
> +#define INTCLEAR_FALL2 (1 << 24)
> +#define INTCLEARALL (INTCLEAR_RISE0 | INTCLEAR_RISE1 | \
> + INTCLEAR_RISE2 | INTCLEAR_FALL0 | \
> + INTCLEAR_FALL1 | INTCLEAR_FALL2)
> +
> +/* Tmeperature threshold values for various thermal events */
> +struct temperature_params {
> + /* minimum value in temperature code range */
> + unsigned int min_val;
> + /* maximum value in temperature code range */
> + unsigned int max_val;
> + /* temperature threshold to start warning */
> + unsigned int start_warning;
> + /* temperature threshold CPU tripping */
> + unsigned int start_tripping;
> +};
> +
> +/* Pre-defined values and thresholds for calibration of current temperature */
> +struct tmu_data {
> + /* pre-defined temperature thresholds */
> + struct temperature_params ts;
> + /* pre-defined efuse range minimum value */
> + unsigned int efuse_min_value;
> + /* pre-defined efuse value for temperature calibration */
> + unsigned int efuse_value;
> + /* pre-defined efuse range maximum value */
> + unsigned int efuse_max_value;
> + /* current temperature sensing slope */
> + unsigned int slope;
> +};
> +
> +/* TMU device specific details and status */
> +struct tmu_info {
> + /* base Address for the TMU */
> + unsigned tmu_base;
> + /* pre-defined values for calibration and thresholds */
> + struct tmu_data data;
> + /* value required for triminfo_25 calibration */
> + unsigned int te1;
> + /* value required for triminfo_85 calibration */
> + unsigned int te2;
> + /* Value for measured data calibration */
> + int dc_value;
> + /* enum value indicating status of the TMU */
> + int tmu_state;
> +};
> +
> +/* Global struct tmu_info variable to store init values */
> +static struct tmu_info gbl_info;
> +
> +/*
> + * Get current temperature code from register,
> + * then calculate and calibrate it's value
> + * in degree celsius.
> + *
> + * @return current temperature of the chip as sensed by TMU
> + */
> +int get_cur_temp(struct tmu_info *info)
static?
> +{
> + int cur_temp;
> + struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
> +
> + /*
> + * Temperature code range between min 25 and max 125.
> + * May run more than once for first call as initial sensing
> + * has not yet happened.
> + */
> + do {
> + cur_temp = readl(®->current_temp) & 0xff;
> + } while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL);
> +
> + /* Calibrate current temperature */
> + cur_temp = cur_temp - info->te1 + info->dc_value;
> +
> + return cur_temp;
> +}
> +
> +/*
> + * Monitors status of the TMU device and exynos temperature
> + *
> + * @param temp pointer to the current temperature value
> + * @return enum tmu_status_t value, code indicating event to execute
> + */
> +enum tmu_status_t tmu_monitor(int *temp)
> +{
> + if (gbl_info.tmu_state == TMU_STATUS_INIT)
> + return TMU_STATUS_INIT;
> +
> + int cur_temp;
> + struct tmu_data *data = &gbl_info.data;
please move this declaration to start of function.
> +
> + /* Read current temperature of the SOC */
> + cur_temp = get_cur_temp(&gbl_info);
> + *temp = cur_temp;
> +
> + /* Temperature code lies between min 25 and max 125 */
> + if (cur_temp >= data->ts.start_tripping &&
> + cur_temp <= data->ts.max_val) {
> + return TMU_STATUS_TRIPPED;
> + } else if (cur_temp >= data->ts.start_warning) {
> + return TMU_STATUS_WARNING;
> + } else if (cur_temp < data->ts.start_warning &&
> + cur_temp >= data->ts.min_val) {
> + return TMU_STATUS_NORMAL;
> + /* Temperature code does not lie between min 25 and max 125 */
is this comment for what?
please move this comment to correct position.
> + } else {
> + gbl_info.tmu_state = TMU_STATUS_INIT;
> + debug("EXYNOS_TMU: Thermal reading failed\n");
> + return TMU_STATUS_INIT;
> + }
> +}
> +
> +/*
> + * Get TMU specific pre-defined values from FDT
> + *
> + * @param info pointer to the tmu_info struct
> + * @param blob FDT blob
> + * @return int value, 0 for success
> + */
> +int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
static?
> +{
#ifdef CONFIG_OF_CONTROL?
> + int node;
> + int error = 0;
> +
> + /* Get the node from FDT for TMU */
> + node = fdtdec_next_compatible(blob, 0,
> + COMPAT_SAMSUNG_EXYNOS_TMU);
> + if (node < 0) {
> + debug("EXYNOS_TMU: No node for tmu in device tree\n");
> + return -1;
> + }
> +
> + /*
> + * Get the pre-defined TMU specific values from FDT.
> + * All of these are expected to be correct otherwise
> + * miscalculation of register values in tmu_setup_parameters
> + * may result in misleading current temperature.
> + */
> + info->tmu_base = fdtdec_get_addr(blob, node, "reg");
> + if (info->tmu_base == FDT_ADDR_T_NONE) {
> + debug("%s: Missing tmu-base\n", __func__);
> + return -1;
> + }
> + info->data.ts.min_val = fdtdec_get_int(blob,
> + node, "samsung,min-temp", -1);
> + error |= info->data.ts.min_val;
> + info->data.ts.max_val = fdtdec_get_int(blob,
> + node, "samsung,max-temp", -1);
> + error |= info->data.ts.max_val;
> + info->data.ts.start_warning = fdtdec_get_int(blob,
> + node, "samsung,start-warning", -1);
> + error |= info->data.ts.start_warning;
> + info->data.ts.start_tripping = fdtdec_get_int(blob,
> + node, "samsung,start-tripping", -1);
> + error |= info->data.ts.start_tripping;
> + info->data.efuse_min_value = fdtdec_get_int(blob,
> + node, "samsung,efuse-min-value", -1);
> + error |= info->data.efuse_min_value;
> + info->data.efuse_value = fdtdec_get_int(blob,
> + node, "samsung,efuse-value", -1);
> + error |= info->data.efuse_value;
> + info->data.efuse_max_value = fdtdec_get_int(blob,
> + node, "samsung,efuse-max-value", -1);
> + error |= info->data.efuse_max_value;
> + info->data.slope = fdtdec_get_int(blob,
> + node, "samsung,slope", -1);
> + error |= info->data.slope;
> + info->dc_value = fdtdec_get_int(blob,
> + node, "samsung,dc-value", -1);
> + error |= info->dc_value;
> +
> + if (error == -1) {
> + debug("fail to get tmu node properties\n");
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Calibrate and calculate threshold values and
> + * enable interrupt levels
> + *
> + * @param info pointer to the tmu_info struct
> + */
> +void tmu_setup_parameters(struct tmu_info *info)
static?
> +{
> + unsigned int te_code, con;
> + unsigned int warning_code, trip_code;
> + unsigned int cooling_temp;
> + unsigned int rising_value;
> + struct tmu_data *data = &info->data;
> + struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
> +
> + /* Must reload for reading efuse value from triminfo register */
> + writel(TRIMINFO_RELOAD, ®->triminfo_control);
> +
> + /* Get the compensation parameter */
> + te_code = readl(®->triminfo);
> + info->te1 = te_code & TRIM_INFO_MASK;
> + info->te2 = ((te_code >> 8) & TRIM_INFO_MASK);
> +
> + if ((data->efuse_min_value > info->te1) ||
> + (info->te1 > data->efuse_max_value)
> + || (info->te2 != 0))
> + info->te1 = data->efuse_value;
> +
> + /* Get RISING & FALLING Threshold value */
> + warning_code = data->ts.start_warning
> + + info->te1 - info->dc_value;
> + trip_code = data->ts.start_tripping
> + + info->te1 - info->dc_value;
> + cooling_temp = 0;
> +
> + rising_value = ((warning_code << 8) | (trip_code << 16));
> +
> + /* Set interrupt level */
> + writel(rising_value, ®->threshold_temp_rise);
> + writel(cooling_temp, ®->threshold_temp_fall);
> +
> + /*
> + * Init TMU control tuning parameters
> + * [28:24] VREF - Voltage reference
> + * [15:13] THERM_TRIP_MODE - Tripping mode
> + * [12] THERM_TRIP_EN - Thermal tripping enable
> + * [11:8] BUF_SLOPE_SEL - Gain of amplifier
> + * [6] THERM_TRIP_BY_TQ_EN - Tripping by TQ pin
> + */
> + writel(data->slope, ®->tmu_control);
> +
> + writel(INTCLEARALL, ®->intclear);
> +
> + /* TMU core enable */
> + con = readl(®->tmu_control);
> + con |= CORE_EN;
> +
> + writel(con, ®->tmu_control);
> +
> + /* LEV0 LEV1 LEV2 interrupt enable */
> + writel(INTEN_RISE0 | INTEN_RISE1 | INTEN_RISE2, ®->inten);
> +}
> +
> +/*
> + * Initialize TMU device
> + *
> + * @param blob FDT blob
> + * @return int value, 0 for success
> + */
> +int tmu_init(const void *blob)
> +{
> + gbl_info.tmu_state = TMU_STATUS_INIT;
> + if (get_tmu_fdt_values(&gbl_info, blob) < 0)
> + return -1;
> +
> + tmu_setup_parameters(&gbl_info);
> + gbl_info.tmu_state = TMU_STATUS_NORMAL;
> + debug("EXYNOS_TMU: Available\n");
> +
> + return 0;
> +}
Thanks,
Minkyu Kang.
More information about the U-Boot
mailing list