[U-Boot] [RFC] Kbuild support for ARM FIT images

Peter Korsgaard jacmet at sunsite.dk
Thu Feb 21 21:56:05 CET 2013


>>>>> "Jason" == Jason Gunthorpe <jgunthorpe at obsidianresearch.com> writes:

Hi,

 Jason> We've been using DT on production embedded stuff sice about 2.6.20ish
 Jason> on PPC and now ARM. We treat the dtb as a kernel version specific
 Jason> file, much like an initrd and ensure that the kernel only ever boots
 Jason> with its proper dtb. This is based on experience that the dtbs change
 Jason> depending on the state of the drivers in the kernel, what gets
 Jason> mainlined and when, etc.

 Jason> Embedding this stuff into the bootloader is *not* desirable for my
 Jason> embedded scenarios. We don't use FIT (or uboot) but we do the same
 Jason> thing: a single image is constructed with the proper dtb, kernel and
 Jason> initrd, and that is what the bootloader boots.

 Jason> Why? This is an embedded appliance product. We need to be able to
 Jason> deliver firmware upgrades that *work*. We can't brick the board
 Jason> because the bootloader and kernel get out of sync. The boot loader has
 Jason> to be *simple*, it has to boot every past, present and future kernel
 Jason> or we start taking risks that a firmware flash will end up bricking
 Jason> it.

I'm having the exact same experience (and handle it in the same way).

I know this was not the intention of DT, but unfortunately this is how
things have turned out so far.

-- 
Bye, Peter Korsgaard


More information about the U-Boot mailing list