[U-Boot] [PATCH v7 15/19] nand: mxc: Switch NAND SPL to generic SPL

[Fabio Estevam]

On Fri, Feb 22, 2013 at 4:14 PM, Fabio Estevam <festevam at gmail.com> wrote:

> Just tested your patch series on a mx31pdk, but unfortunately it does
> not fix mx31pdk boot.
>
> I will start looking at it, but any suggestion is welcome.

Ok, just changed to a proper toolchain and the result is a bit better now:

U-Boot 2013.01 (Feb 22 2013 - 16:25:48)

CPU:   Freescale i.MX31 rev 2.0 at 532 MHz.
Reset cause: POR
Board: MX31PDK
DRAM:  128 MiB

(hangs here).