[U-Boot] [PATCH v7 15/19] nand: mxc: Switch NAND SPL to generic SPL

[Fabio Estevam]

On Fri, Feb 22, 2013 at 6:13 PM, Benoît Thébaudeau
<benoit.thebaudeau at advansee.com> wrote:

> CONFIG_SYS_TEXT_BASE seems fine according to this trace. But anyway, can you
> test with this change in mx31pdk.h?
> #define CONFIG_SPL_TEXT_BASE    0x84000000
> #define CONFIG_SYS_TEXT_BASE    0x83000000
>
> Can you try to revert 10/19, only for arm1136/start.S (1 line to restore)? There
> is an issue in this patch that I have already fixed in my v8.

Just tried with the above changes:

U-Boot code: 83000000 -> 8302C184  BSS: -> 830311B4
CPU:   Freescale i.MX31 rev 2.0 at 532 MHz.
Reset cause: POR
Board: MX31PDK
monitor len: 000311B4
ramsize: 08000000
TLB table from 87ff0000 to 87ff4000
Top of RAM usable for U-Boot at: 87ff0000
Reserving 196k for U-Boot at: 87fbe000
Reserving 640k for malloc() at: 87f1e000
Reserving 32 Bytes for Board Info at: 87f1dfe0
Reserving 128 Bytes for Global Data at: 87f1df60
New Stack Pointer is: 87f1df50
RAM Configuration:
Bank #0: 80000000 128 MiB
relocation Offset is: 04fbe000