[U-Boot] [PATCH 02/13] mxs: mmc: spi: dma: Better wrap the MXS differences
Marek Vasut
marex at denx.de
Sat Feb 23 13:42:58 CET 2013
This patch streamlines the differences between the MX23 and MX28 by
implementing a few helper functions to handle different DMA channel
mapping, different clock domain for SSP block and fixes a few minor
bugs.
First of all, the DMA channel mapping is now fixed in dma.h by defining
the actual channel map for both MX23 and MX28. Thus, MX23 now does no
longer use MX28 channel map which was wrong. Also, there is a fix for
MX28 DMA channel map, where the last four channels were incorrect.
Next, because correct DMA channel map is in place, the mxs_dma_init_channel()
call now bases the channel ID starting from SSP port #0. This removes the
need for DMA channel offset being added and cleans up the code. For the
same reason, the SSP0 offset can now be used in mxs_dma_desc_append(), thus
no need to adjust dma channel number in the driver either.
Lastly, the SSP clock ID is now retrieved by calling mxs_ssp_clock_by_bus()
which handles the fact that MX23 has shared SSP clock for both ports, while
MX28 has per-port SSP clock.
Finally, the mxs_ssp_bus_id_valid() pulls out two implementations of the
same functionality from MMC and SPI driver into common code.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Stefano Babic <sbabic at denx.de>
---
arch/arm/cpu/arm926ejs/mxs/clock.c | 3 ++-
arch/arm/include/asm/arch-mxs/dma.h | 19 ++++++++++++++++++-
arch/arm/include/asm/arch-mxs/regs-ssp.h | 26 ++++++++++++++++++++++++++
drivers/mmc/mxsmmc.c | 20 ++++----------------
drivers/spi/mxs_spi.c | 4 ++--
5 files changed, 52 insertions(+), 20 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index 00b9aba..43e7663 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -289,7 +289,8 @@ static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp)
void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq)
{
struct mxs_ssp_regs *ssp_regs;
- const uint32_t sspclk = mxs_get_sspclk(bus);
+ const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus);
+ const uint32_t sspclk = mxs_get_sspclk(clk);
uint32_t reg;
uint32_t divide, rate, tgtclk;
diff --git a/arch/arm/include/asm/arch-mxs/dma.h b/arch/arm/include/asm/arch-mxs/dma.h
index a0a0ea5..1ac8696 100644
--- a/arch/arm/include/asm/arch-mxs/dma.h
+++ b/arch/arm/include/asm/arch-mxs/dma.h
@@ -40,6 +40,19 @@
/*
* MXS DMA channels
*/
+#if defined(CONFIG_MX23)
+enum {
+ MXS_DMA_CHANNEL_AHB_APBH_LCDIF = 0,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP0,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP1,
+ MXS_DMA_CHANNEL_AHB_APBH_RESERVED0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+ MXS_MAX_DMA_CHANNELS,
+};
+#elif defined(CONFIG_MX28)
enum {
MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0,
MXS_DMA_CHANNEL_AHB_APBH_SSP1,
@@ -53,9 +66,13 @@ enum {
MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
- MXS_DMA_CHANNEL_AHB_APBH_SSP,
+ MXS_DMA_CHANNEL_AHB_APBH_HSADC,
+ MXS_DMA_CHANNEL_AHB_APBH_LCDIF,
+ MXS_DMA_CHANNEL_AHB_APBH_RESERVED0,
+ MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
MXS_MAX_DMA_CHANNELS,
};
+#endif
/*
* MXS DMA hardware command.
diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h
index 9b30f56..5920f9b 100644
--- a/arch/arm/include/asm/arch-mxs/regs-ssp.h
+++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h
@@ -74,6 +74,32 @@ struct mxs_ssp_regs {
};
#endif
+static inline int mxs_ssp_bus_id_valid(int bus)
+{
+#if defined(CONFIG_MX23)
+ const unsigned int mxs_ssp_chan_count = 2;
+#elif defined(CONFIG_MX28)
+ const unsigned int mxs_ssp_chan_count = 4;
+#endif
+
+ if (bus >= mxs_ssp_chan_count)
+ return 0;
+
+ if (bus < 0)
+ return 0;
+
+ return 1;
+}
+
+static inline int mxs_ssp_clock_by_bus(unsigned int clock)
+{
+#if defined(CONFIG_MX23)
+ return 0;
+#elif defined(CONFIG_MX28)
+ return clock;
+#endif
+}
+
static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
{
switch (port) {
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index a72f66c..b1537e2 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -53,12 +53,6 @@ struct mxsmmc_priv {
struct mxs_dma_desc *desc;
};
-#if defined(CONFIG_MX23)
-static const unsigned int mxsmmc_id_offset = 1;
-#elif defined(CONFIG_MX28)
-static const unsigned int mxsmmc_id_offset = 0;
-#endif
-
#define MXSMMC_MAX_TIMEOUT 10000
#define MXSMMC_SMALL_TRANSFER 512
@@ -137,7 +131,7 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
(data_count << MXS_DMA_DESC_BYTES_OFFSET);
- dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id + mxsmmc_id_offset;
+ dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
mxs_dma_desc_append(dmach, priv->desc);
if (mxs_dma_go(dmach)) {
bounce_buffer_stop(&bbstate);
@@ -390,15 +384,9 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
struct mmc *mmc = NULL;
struct mxsmmc_priv *priv = NULL;
int ret;
-#if defined(CONFIG_MX23)
- const unsigned int mxsmmc_max_id = 2;
- const unsigned int mxsmmc_clk_id = 0;
-#elif defined(CONFIG_MX28)
- const unsigned int mxsmmc_max_id = 4;
- const unsigned int mxsmmc_clk_id = id;
-#endif
+ const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id);
- if (id >= mxsmmc_max_id)
+ if (!mxs_ssp_bus_id_valid(id))
return -ENODEV;
mmc = malloc(sizeof(struct mmc));
@@ -418,7 +406,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
return -ENOMEM;
}
- ret = mxs_dma_init_channel(id + mxsmmc_id_offset);
+ ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id);
if (ret)
return ret;
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index bb865b7..6acc95a 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -70,7 +70,7 @@ void spi_init(void)
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
/* MXS SPI: 4 ports and 3 chip selects maximum */
- if (bus > 3 || cs > 2)
+ if (!mxs_ssp_bus_id_valid(bus) || cs > 2)
return 0;
else
return 1;
@@ -92,7 +92,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
if (!mxs_slave)
return NULL;
- if (mxs_dma_init_channel(bus))
+ if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus))
goto err_init;
mxs_slave->slave.bus = bus;
--
1.7.10.4
More information about the U-Boot
mailing list