[U-Boot] [PATCH v7 04/19] imx: mx53ard: Add support for NAND Flash

[Fabio Estevam]

Hi Benoit,

On Fri, Feb 15, 2013 at 6:54 PM, Benoît Thébaudeau
<benoit.thebaudeau at advansee.com> wrote:
> Add support for the Samsung K9LAG08U0M NAND Flash (2-GiB MLC NAND Flash, 2-kiB
> pages, 256-kiB blocks, 30-ns R/W cycles, 1 CS) on mx53ard.
>
> eNFC_CLK_ROOT is set up with a cycle time of 37.5 ns (400 MHz / 3 / 5) for this
> board, which satisfies the 30-ns NF R/W cycle requirement.
>
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>

NAND is not detected on my mx53ard.

I think we need to adjust the IOMUX as per:
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/board/freescale/mx53_ard/mx53_ard.c?h=imx_v2009.08

Regards,

Fabio Estevam