[U-Boot] [PATCH 9/9] Exynos: pwm: Use generic api to get pwm clk freq

Rajeshwari Birje rajeshwari.birje at gmail.com
Thu Feb 28 06:33:39 CET 2013


Hi Akshay

On Wed, Feb 27, 2013 at 3:32 PM, Akshay Saraswat <akshay.s at samsung.com> wrote:
> Use generic api to get the pwm clock frequency
>
> TEST=sf probe 1:0; time sf read 40008000 0 1000
> Try with different numbers of bytes and see that sane values are obtained
> Build and boot U-boot with this patch, backlight works properly.
>
> Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
> Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
> ---
>  arch/arm/cpu/armv7/s5p-common/pwm.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c
> index 6f401b8..06e0351 100644
> --- a/arch/arm/cpu/armv7/s5p-common/pwm.c
> +++ b/arch/arm/cpu/armv7/s5p-common/pwm.c
> @@ -28,6 +28,7 @@
>  #include <asm/io.h>
>  #include <asm/arch/pwm.h>
>  #include <asm/arch/clk.h>
> +#include <asm/arch/periph.h>
>
>  int pwm_enable(int pwm_id)
>  {
> @@ -60,7 +61,7 @@ static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq)
>         unsigned long tin_parent_rate;
>         unsigned int div;
>
> -       tin_parent_rate = get_pwm_clk();
> +       tin_parent_rate = clock_get_periph_rate(PERIPH_ID_PWM0);
Kindly check if it works for other S5P soc as  clock_get_periph_rate
is only defined for EXYNOS5.
>
>         for (div = 2; div <= 16; div *= 2) {
>                 if ((tin_parent_rate / (div << 16)) < freq)
> @@ -165,8 +166,8 @@ int pwm_init(int pwm_id, int div, int invert)
>                 ticks_per_period = -1UL;
>         } else {
>                 const unsigned long pwm_hz = 1000;
> -               unsigned long timer_rate_hz = get_pwm_clk() /
> -                       ((prescaler + 1) * (1 << div));
> +               unsigned long timer_rate_hz = clock_get_periph_rate(
> +                       PERIPH_ID_PWM0) / ((prescaler + 1) * (1 << div));
>
>                 ticks_per_period = timer_rate_hz / pwm_hz;
>         }
> --
> 1.8.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
Regards,
Rajeshwari Shinde


More information about the U-Boot mailing list