[U-Boot] [PATCH 9/9 v2] Exynos: pwm: Use generic api to get pwm clk freq

Akshay Saraswat akshay.s at samsung.com
Thu Feb 28 11:59:24 CET 2013


Use generic api to get the pwm clock frequency

Test with command "sf probe 1:0; time sf read 40008000 0 1000".
Try with different numbers of bytes and see that sane values are obtained
Build and boot U-boot with this patch, backlight works properly.

Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
---
Changes since v1:
        - Restored get_pwm_clk call in case of non-exynos5 cpu.

 arch/arm/cpu/armv7/s5p-common/pwm.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c
index 6f401b8..f5e9a95 100644
--- a/arch/arm/cpu/armv7/s5p-common/pwm.c
+++ b/arch/arm/cpu/armv7/s5p-common/pwm.c
@@ -28,6 +28,7 @@
 #include <asm/io.h>
 #include <asm/arch/pwm.h>
 #include <asm/arch/clk.h>
+#include <asm/arch/periph.h>
 
 int pwm_enable(int pwm_id)
 {
@@ -60,7 +61,10 @@ static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq)
 	unsigned long tin_parent_rate;
 	unsigned int div;
 
-	tin_parent_rate = get_pwm_clk();
+	if (cpu_is_exynos5())
+		tin_parent_rate = clock_get_periph_rate(PERIPH_ID_PWM0);
+	else
+		tin_parent_rate = get_pwm_clk();
 
 	for (div = 2; div <= 16; div *= 2) {
 		if ((tin_parent_rate / (div << 16)) < freq)
@@ -165,8 +169,15 @@ int pwm_init(int pwm_id, int div, int invert)
 		ticks_per_period = -1UL;
 	} else {
 		const unsigned long pwm_hz = 1000;
-		unsigned long timer_rate_hz = get_pwm_clk() /
-			((prescaler + 1) * (1 << div));
+		unsigned long timer_rate_hz;
+
+		if (cpu_is_exynos5()) {
+			timer_rate_hz = clock_get_periph_rate(PERIPH_ID_PWM0)
+					/ ((prescaler + 1) * (1 << div));
+		} else {
+			timer_rate_hz = get_pwm_clk() /
+				((prescaler + 1) * (1 << div));
+		}
 
 		ticks_per_period = timer_rate_hz / pwm_hz;
 	}
-- 
1.8.0



More information about the U-Boot mailing list