[U-Boot] [PATCH 3/4 V2] EXYNOS4210: Configure GPIO for uart

[Rajeshwari Shinde]

This patch configures the gpio values for UART
on Origen and SMDKV310 using pinmux

Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Chnages in V2:
	- None
 arch/arm/cpu/armv7/exynos/pinmux.c |   40 +++++++++++++++++++++++++++++++
 board/samsung/origen/origen.c      |   46 ++++++++++++++++++++++++++++++++++++
 board/samsung/smdkv310/smdkv310.c  |   46 ++++++++++++++++++++++++++++++++++++
 include/configs/origen.h           |    1 +
 include/configs/smdkv310.h         |    1 +
 5 files changed, 134 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index bd499b4..2042062 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -408,9 +408,49 @@ static int exynos4_mmc_config(int peripheral, int flags)
 	return 0;
 }
 
+static void exynos4_uart_config(int peripheral)
+{
+	struct exynos4_gpio_part1 *gpio1 =
+		(struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+	struct s5p_gpio_bank *bank;
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		bank = &gpio1->a0;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		bank = &gpio1->a0;
+		start = 4;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		bank = &gpio1->a1;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		bank = &gpio1->a1;
+		start = 4;
+		count = 2;
+		break;
+	}
+	for (i = start; i < start + count; i++) {
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+	}
+}
 static int exynos4_pinmux_config(int peripheral, int flags)
 {
 	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos4_uart_config(peripheral);
+		break;
 	case PERIPH_ID_I2C0:
 	case PERIPH_ID_I2C1:
 	case PERIPH_ID_I2C2:
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 638e7b1..b7dbb91 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -25,6 +25,8 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 struct exynos4_gpio_part1 *gpio1;
@@ -39,6 +41,50 @@ int board_init(void)
 	return 0;
 }
 
+static int board_uart_init(void)
+{
+	int err;
+
+	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART0 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART1 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART2 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART3 not configured\n");
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	int err;
+	err = board_uart_init();
+	if (err) {
+		debug("UART init failed\n");
+		return err;
+	}
+	return err;
+}
+#endif
+
 int dram_init(void)
 {
 	gd->ram_size	= get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index 81ac8f6..015b920 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -26,6 +26,8 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
 #include <asm/arch/sromc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -137,3 +139,47 @@ int board_mmc_init(bd_t *bis)
 	return err;
 }
 #endif
+
+static int board_uart_init(void)
+{
+	int err;
+
+	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART0 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART1 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART2 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART3 not configured\n");
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	int err;
+	err = board_uart_init();
+	if (err) {
+		debug("UART init failed\n");
+		return err;
+	}
+	return err;
+}
+#endif
diff --git a/include/configs/origen.h b/include/configs/origen.h
index e179911..f71a463 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -36,6 +36,7 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Keep L2 Cache Disabled */
 #define CONFIG_L2_OFF			1
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 5e43066..db78127 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -36,6 +36,7 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Mach Type */
 #define CONFIG_MACH_TYPE		MACH_TYPE_SMDKV310
-- 
1.7.4.4