[U-Boot] [PATCH 1/2][v2] board/bsc9132qds: Add DSP side tlb and laws

[Priyanka Jain]

BSC9132QDS is a Freescale Reference Design Board for BSC9132 SoC which is a
integrated device that contains two powerpc e500v2 cores and two DSP
starcores.

To support DSP starcore
-Creating LAW and TLB for DSP-CCSR space.
-Creating LAW for DSP-core subsystem M2 and M3 memory
-Creating LAW for 1GB DDR which is connected exclusively to DSP-cores

Signed-off-by: Manish Jaggi <manish.jaggi at freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
---
 Changes for v2: Added Manish's email-id

 README                                    |    8 ++++++++
 arch/powerpc/include/asm/config_mpc85xx.h |    4 ++++
 arch/powerpc/include/asm/fsl_law.h        |    6 +++++-
 board/freescale/bsc9132qds/law.c          |    8 ++++++++
 board/freescale/bsc9132qds/tlb.c          |    5 +++++
 include/configs/BSC9132QDS.h              |    4 ++++
 6 files changed, 34 insertions(+), 1 deletions(-)

diff --git a/README b/README
index e8359f8..99a2c02 100644
--- a/README
+++ b/README
@@ -422,10 +422,18 @@ The following options need to be configured:
 		This is the value to write into CCSR offset 0x18600
 		according to the A004510 workaround.
 
+		CONFIG_SYS_FSL_DSP_DDR_ADDR
+		This value denotes start offset of DDR memory which is
+		connected exclusively to the DSP cores.
+
 		CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
 		This value denotes start offset of M2 memory
 		which is directly connected to the DSP core.
 
+		CONFIG_SYS_FSL_DSP_M3_RAM_ADDR
+		This value denotes start offset of M3 memory which is directly
+		connected to the DSP core.
+
 		CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 		This value denotes start offset of DSP CCSR space.
 
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 1d46b14..16ef7df 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -506,6 +506,10 @@
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
 #define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FSL_DSP_DDR_ADDR	0x40000000
+#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR	0xb0000000
+#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR	0xc0000000
+#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT	0xff600000
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	3
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_NAND_FSL_IFC
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index bea1636..fa51e59 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -82,7 +82,7 @@ enum law_trgt_if {
 #ifndef CONFIG_MPC8641
 	LAW_TRGT_IF_PCIE_1 = 0x02,
 #endif
-#if defined(CONFIG_BSC9131)
+#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
 	LAW_TRGT_IF_OCN_DSP = 0x03,
 #else
 #if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020)
@@ -94,7 +94,11 @@ enum law_trgt_if {
 	LAW_TRGT_IF_DSP_CCSR = 0x09,
 	LAW_TRGT_IF_DDR_INTRLV = 0x0b,
 	LAW_TRGT_IF_RIO = 0x0c,
+#if defined(CONFIG_BSC9132)
+	LAW_TRGT_IF_CLASS_DSP = 0x0d,
+#else
 	LAW_TRGT_IF_RIO_2 = 0x0d,
+#endif
 	LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e,
 	LAW_TRGT_IF_DDR = 0x0f,
 	LAW_TRGT_IF_DDR_2 = 0x16,	/* 2nd controller */
diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c
index b4bce99..99ea56b 100644
--- a/board/freescale/bsc9132qds/law.c
+++ b/board/freescale/bsc9132qds/law.c
@@ -32,6 +32,14 @@ struct law_entry law_table[] = {
 #ifdef CONFIG_SYS_FPGA_BASE_PHYS
 	SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
 #endif
+	SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M,
+		LAW_TRGT_IF_DSP_CCSR),
+	SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_32M,
+		LAW_TRGT_IF_OCN_DSP),
+	SET_LAW(CONFIG_SYS_FSL_DSP_M3_RAM_ADDR, LAW_SIZE_32K,
+		LAW_TRGT_IF_CLASS_DSP),
+	SET_LAW(CONFIG_SYS_FSL_DSP_DDR_ADDR, LAW_SIZE_1G,
+		LAW_TRGT_IF_CLASS_DSP)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
index 0ec9a85..734f3f8 100644
--- a/board/freescale/bsc9132qds/tlb.c
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -57,6 +57,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 1, BOOKE_PAGESZ_1M, 1),
 
+	/* CCSRBAR (DSP) */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR,
+		      CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, MAS3_SW|MAS3_SR,
+		      MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1),
+
 #ifndef CONFIG_SPL_BUILD
 	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
 			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 3aa4443..91105eb 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -240,6 +240,10 @@ combinations. this should be removed later
 
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR
 
+/* DSP CCSRBAR */
+#define CONFIG_SYS_FSL_DSP_CCSRBAR	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
+#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
+
 /*
  * IFC Definitions
  */
-- 
1.7.4.1