[U-Boot] [ANN] v2013.07-rc2

[Robert Nelson]

On Tue, Jul 2, 2013 at 2:39 AM, Simon Glass <sjg at chromium.org> wrote:
> Hi Robert,
>
> On Tue, Jul 2, 2013 at 5:44 AM, Robert Nelson <robertcnelson at gmail.com>
> wrote:
>>
>> On Fri, Jun 28, 2013 at 5:12 PM, Tom Rini <trini at ti.com> wrote:
>> > Hey all,
>> >
>> > I've tagged and pushed v2013.07-rc2.  A bit more over the place than I
>> > should have gone, but picked up a lot of things that have been
>> > outstanding for a while.  The big thing is a refactor of the boot loop.
>> > Everything should be working right now, but please test.  Related to
>> > this is the ability to have crytpographically signed images.  It's like
>> > secure boot in UEFI land, but hopefully without the kerfuffle.
>> >
>> > If you've got changes outstanding still, please start gently poking
>> > custodians with patchwork links.  I've got a good bit of stuff I need to
>> > deal with myself still, but please prod me all the same.
>>
>> So, the bootm refactor ( 35fc84fa1ff51e15ecd3e464dac87eb105ffed30 )
>> also broke bootz/zImage...
>>
>> Got it to atleast get past the "invalid OS" message via:
>>
>> diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
>> index 02a5013..a0b55ef 100644
>> --- a/common/cmd_bootm.c
>> +++ b/common/cmd_bootm.c
>> @@ -1744,6 +1744,12 @@ static int bootz_start(cmd_tbl_t *cmdtp, int
>> flag, int argc,
>>         int ret;
>>         void *zi_start, *zi_end;
>>
>> +       memset(images, 0, sizeof(bootm_headers_t));
>> +
>> +       boot_start_lmb(images);
>> +
>> +       images->os.os = IH_OS_LINUX;
>> +
>>         ret = do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START,
>>                               images, 1);
>>
>> However it's still locking up at "Starting Kernel ..."
>
>
> What board is this please? I have only tested on x86, but perhaps have
> missed something here.

So far it looks like any arm board...  I was working on specifically
the imx6 quad core wandboard bringup.  But i've also verified it on
the Panda/Beagle too...  Alll 3 of these boards worked fine with
v2013.07-rc1...

Wandboard:

Boot Sequence: (device tree boot)
load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file}
bootz ${loadaddr} - ${fdt_addr}

U-Boot 2013.07-rc2-00001-g23c15c2-dirty (Jul 02 2013 - 06:33:59)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Warning: FEC using MAC address from net device

Hit any key to stop autoboot:  0
=> load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
4112496 bytes read in 307 ms (12.8 MiB/s)
=> load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file}
22150 bytes read in 126 ms (170.9 KiB/s)
=> bootz ${loadaddr} - ${fdt_addr}

Beagle xM:

Boot Sequence: (old board file boot)
fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
bootz ${loadaddr}

OMAP3 beagleboard.org # fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
reading zImage
3421392 bytes read in 246 ms (13.3 MiB/s)
OMAP3 beagleboard.org # bootz ${loadaddr}
data abort

    MAYBE you should read doc/README.arm-unaligned-accesses

pc : [<9ff8bf20>]	   lr : [<9ff5d2a8>]
sp : 9fef8bd8  ip : 9ffffff8	 fp : 9fef9760
r10: 9ffa6314  r9 : 9ffa7710	 r8 : 9fef8f30
r7 : 805434d0  r6 : 00020e61	 r5 : ffafefff  r4 : 9ff9c6e6
r3 : 00020e61  r2 : 003434d0	 r1 : 80200000  r0 : 9fef8cf0
Flags: nzcv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

U-Boot SPL 2013.07-rc2-00001-g7c2cb8a-dirty (Jul 02 2013 - 06:14:53)

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/