[U-Boot] [PATCH v3 0/5] ARM: at91: atmel_nand: check ONFI ecc minimum requirement

[Josh Wu]

In this patch series, first we make the nand driver can dynamic change sector
size and ecc correct bits.
Then we enable ONFI ecc parameters check.

v2 --> v3: use dev_err/info(host->dev) instead of dev_err/info(NULL).
           use MTDDEBUG instead of pr_debug().

v1 --> v2: Fixes according to Scoot Wood's suggestion
  - add a new patch which make all driver can use dev_err, dev_info, dev_dbg.
  - replace all printk to dev_err or dev_info.
  - fix pmecc data allocate error handler.
  - fix the pmecc ecc requirement selection, should use <= instead of use <.

Josh Wu (5):
  ARM: at91: atmel_nand: pmecc driver will select the galois table by
    sector size
  ARM: at91: sama5d3: remove unused definition about PMECC alpha table
    offset
  linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to
    compat.h
  mtd: atmel_nand: alloc memory instead of use static array for pmecc
    data
  ARM: at91: atmel_nand: add code to check the ONFI parameter ECC
    requirement

 arch/arm/include/asm/arch-at91/at91sam9x5.h |    6 +
 arch/arm/include/asm/arch-at91/sama5d3.h    |    2 -
 doc/README.atmel_pmecc                      |   14 --
 drivers/mtd/nand/atmel_nand.c               |  197 +++++++++++++++++++++++++--
 drivers/usb/musb-new/linux-compat.h         |   16 ---
 include/configs/at91sam9x5ek.h              |    1 -
 include/configs/sama5d3xek.h                |    1 -
 include/linux/compat.h                      |    8 ++
 8 files changed, 201 insertions(+), 44 deletions(-)

-- 
1.7.9.5