[U-Boot] [PATCH v6 12/12] arm: add Faraday A360/A369 SoC platform support
Kuo-Jung Su
dantesu at gmail.com
Thu Jul 4 05:40:44 CEST 2013
From: Kuo-Jung Su <dantesu at faraday-tech.com>
This adds board support for the Faraday A360/A369 SoC platforms.
Working functions:
- MMU/D-cache
- SD Host controller
- USB EHCI controller
- USB Gadget controller
- Network
- NAND
Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
CC: Albert Aribaud <albert.u.boot at aribaud.net>
---
Changes for v6:
- arch/arm/cpu/faraday/cpu.c:
struct ftwdt010_wdt __iomem *regs -> struct ftwdt010_wdt *regs
Changes for v5:
- Coding Style cleanup:
1. struct chip_regs __iomem *regs -> struct chip_regs *regs
2. Move Faraday specific APIs into asm/arch-faraday/*.h
- Fix Copyright notices (dates) throughout the patch
- Define Faraday machine type in board's config header file
- Add myself as the maintainer for Faraday A360/A369 in MAINTAINERS.
- Drop i2c:FTI2C010 & spi:FTSSP010_SPI support. The corresponding patch
would restart after this patch series have been accepted.
- Revise clock management system
Changes for v4:
- Coding Style cleanup.
- Break-down the interrupt, timers and common utilties.
Changes for v3:
- Coding Style cleanup.
- Drop macros for wirtel()/readl(), call them directly.
- Always insert a blank line between declarations and code.
- Add '__iomem' to all the declaration of HW register pointers.
- a36x_config: No more static global network configurations.
- a36x_config: Add a common file for the redundant configurations.
Changes for v2:
- Coding Style cleanup.
- Use readl(), writel(), clrsetbits_le32() to replace REG() macros.
- Use structure based hardware registers to replace the macro constants.
- Replace BIT() with BIT_MASK().
MAINTAINERS | 5 +
arch/arm/cpu/faraday/a360/Makefile | 49 +++++
arch/arm/cpu/faraday/a369/Makefile | 50 +++++
arch/arm/cpu/faraday/a369/cmd_fa606.c | 86 +++++++++
arch/arm/cpu/faraday/cpu.c | 2 +
arch/arm/include/asm/arch-a360/hardware.h | 84 +++++++++
arch/arm/include/asm/arch-a360/pmu.h | 95 ++++++++++
arch/arm/include/asm/arch-a360/scu.h | 79 ++++++++
arch/arm/include/asm/arch-a369/ahbc.h | 34 ++++
arch/arm/include/asm/arch-a369/hardware.h | 99 ++++++++++
arch/arm/include/asm/arch-a369/scu.h | 224 +++++++++++++++++++++++
arch/arm/include/asm/arch-faraday/clock.h | 41 +++++
arch/arm/include/asm/arch-faraday/interrupt.h | 29 +++
board/faraday/a360evb/Makefile | 49 +++++
board/faraday/a360evb/board.c | 72 ++++++++
board/faraday/a360evb/clock.c | 72 ++++++++
board/faraday/a360evb/config.mk | 33 ++++
board/faraday/a360evb/lowlevel_init.S | 33 ++++
board/faraday/a369evb/Makefile | 49 +++++
board/faraday/a369evb/board.c | 176 ++++++++++++++++++
board/faraday/a369evb/clock.c | 80 ++++++++
board/faraday/a369evb/config.mk | 33 ++++
board/faraday/a369evb/lowlevel_init.S | 136 ++++++++++++++
boards.cfg | 3 +
include/common.h | 2 +
include/configs/a360.h | 60 ++++++
include/configs/a369-common.h | 75 ++++++++
include/configs/a369.h | 34 ++++
include/configs/a369_fa606te.h | 31 ++++
include/configs/faraday-common.h | 243 +++++++++++++++++++++++++
include/faraday/ftsmc020.h | 1 +
31 files changed, 2059 insertions(+)
create mode 100644 arch/arm/cpu/faraday/a360/Makefile
create mode 100644 arch/arm/cpu/faraday/a369/Makefile
create mode 100644 arch/arm/cpu/faraday/a369/cmd_fa606.c
create mode 100644 arch/arm/include/asm/arch-a360/hardware.h
create mode 100644 arch/arm/include/asm/arch-a360/pmu.h
create mode 100644 arch/arm/include/asm/arch-a360/scu.h
create mode 100644 arch/arm/include/asm/arch-a369/ahbc.h
create mode 100644 arch/arm/include/asm/arch-a369/hardware.h
create mode 100644 arch/arm/include/asm/arch-a369/scu.h
create mode 100644 arch/arm/include/asm/arch-faraday/clock.h
create mode 100644 arch/arm/include/asm/arch-faraday/interrupt.h
create mode 100644 board/faraday/a360evb/Makefile
create mode 100644 board/faraday/a360evb/board.c
create mode 100644 board/faraday/a360evb/clock.c
create mode 100644 board/faraday/a360evb/config.mk
create mode 100644 board/faraday/a360evb/lowlevel_init.S
create mode 100644 board/faraday/a369evb/Makefile
create mode 100644 board/faraday/a369evb/board.c
create mode 100644 board/faraday/a369evb/clock.c
create mode 100644 board/faraday/a369evb/config.mk
create mode 100644 board/faraday/a369evb/lowlevel_init.S
create mode 100644 include/configs/a360.h
create mode 100644 include/configs/a369-common.h
create mode 100644 include/configs/a369.h
create mode 100644 include/configs/a369_fa606te.h
create mode 100644 include/configs/faraday-common.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 7820375..537e09f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -643,6 +643,11 @@ Po-Yu Chuang <ratbert at faraday-tech.com>
a320evb FA526 (ARM920T-like) (a320 SoC)
+Kuo-Jung Su <dantesu at faraday-tech.com>
+
+ a360evb FA626TE (Faraday ARMv5TE) (a360 SoC)
+ a369evb FA626TE & FA606TE (Faraday ARMv5TE) (a369 SoC)
+
Eric Cooper <ecc at cmu.edu>
dockstar ARM926EJS (Kirkwood SoC)
diff --git a/arch/arm/cpu/faraday/a360/Makefile b/arch/arm/cpu/faraday/a360/Makefile
new file mode 100644
index 0000000..7113f66
--- /dev/null
+++ b/arch/arm/cpu/faraday/a360/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+obj-y :=
+
+COBJS := $(obj-y)
+SOBJS :=
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/faraday/a369/Makefile b/arch/arm/cpu/faraday/a369/Makefile
new file mode 100644
index 0000000..4dddd36
--- /dev/null
+++ b/arch/arm/cpu/faraday/a369/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+obj-y :=
+obj-$(CONFIG_CMD_FA606) += cmd_fa606.o
+
+COBJS := $(obj-y)
+SOBJS :=
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/faraday/a369/cmd_fa606.c b/arch/arm/cpu/faraday/a369/cmd_fa606.c
new file mode 100644
index 0000000..aa9fa6c
--- /dev/null
+++ b/arch/arm/cpu/faraday/a369/cmd_fa606.c
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/cpu/faraday/a369/cmd_fa606.c
+ *
+ * This command would start the A369 slave cpu:FA606TE,
+ * and also immediately halt the master cpu:FA626TE.
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/arch/scu.h>
+#include <asm/arch/ahbc.h>
+
+static struct a369scu_regs *scu = (void __iomem *)CONFIG_SCU_BASE;
+static struct a369ahbc_regs *ahbc = (void __iomem *)CONFIG_AHBC2_BASE;
+
+static int do_fa606(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ unsigned int addr = CONFIG_SYS_LOAD_ADDR;
+
+ if (argc >= 2)
+ addr = simple_strtoul(argv[1], NULL, 16);
+
+ printf("FA606TE Image at 0x%08X\n", addr);
+ printf("FA626TE is going to halt...\n");
+
+ cleanup_before_linux();
+
+ /* 1. FA606TE address offset = 0 */
+ printf("FA606 address shift disable.\n");
+ writel(0x00000000, &ahbc->cpusao);
+
+ /* 2. Generate a long-jump to 0x00000000 */
+ writel(0xEA00000A, 0x00); /* b 0x30 */
+ writel(addr, 0x20);
+ writel(0xE3A00020, 0x30); /* mov r0, #32 ; 0x20 */
+ writel(0xE590F000, 0x34); /* ldr pc, [r0] */
+
+ /* 3. Pinmux = ICE + LCD */
+ writel(GPMUX_DEFAULT, &scu->gpmux);
+ writel(SCCFG0_DEFAULT, &scu->sccfg[0]);
+ writel(SCCFG1_DEFAULT, &scu->sccfg[1]);
+ writel(MFPMUX0_TS(1) | MFPMUX0_ISP(2) | MFPMUX0_SATA(1)
+ | MFPMUX0_EXTAHB(1), &scu->mfpmux[0]);
+ writel(MFPMUX1_SSP0(1), &scu->mfpmux[1]);
+ udelay(5000);
+
+ /* 4. FA606TE clock enable & reset */
+ writel(0x00000000, &scu->hclkgr);
+ udelay(5000);
+ writel(GPMUX_DEFAULT | GPMUX_CPUS_START, &scu->gpmux);
+
+ /* 5. FA626TE is going to halt... */
+ __asm__ __volatile__ (
+ "mov r0, #0\n"
+ "mcr p15,0,r0,c7,c0,4\n"
+ :
+ :
+ : "r0" /* clobber list */
+ );
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ fa606, 2, 0, do_fa606,
+ "launch firmware with A369's built-in fa606te\n",
+ "fa606 [address] - mov pc of fa606te to the specified address.\n"
+);
diff --git a/arch/arm/cpu/faraday/cpu.c b/arch/arm/cpu/faraday/cpu.c
index 449bf0d..123ec7e 100644
--- a/arch/arm/cpu/faraday/cpu.c
+++ b/arch/arm/cpu/faraday/cpu.c
@@ -339,5 +339,7 @@ void reset_cpu(unsigned long ignored)
writel(1000, ®s->wdload);
/* Enable WDT with System Reset Function */
writel(FTWDT010_WDCR_ENABLE | FTWDT010_WDCR_RST, ®s->wdcr);
+ /* Kick it to force counter reloaded */
+ writel(FTWDT010_WDRESTART_MAGIC, ®s->wdrestart);
#endif
}
diff --git a/arch/arm/include/asm/arch-a360/hardware.h b/arch/arm/include/asm/arch-a360/hardware.h
new file mode 100644
index 0000000..770964f
--- /dev/null
+++ b/arch/arm/include/asm/arch-a360/hardware.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/include/asm/arch-a360/hardware.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#define CONFIG_SCU_BASE 0x99900000
+#define CONFIG_PMU_BASE 0x98100000
+#define CONFIG_PMU_IRQ 8
+
+/*
+ * Timer
+ */
+#define CONFIG_FTTMR010_BASE 0x98400000
+#define CONFIG_FTTMR010_IRQ 19
+
+/*
+ * UART
+ */
+#define CONFIG_FTUART010_BASE 0x98200000
+
+/*
+ * Interrupt
+ */
+#define CONFIG_FTINTC020_BASE 0x98800000
+
+/*
+ * WatchDog
+ */
+#define CONFIG_FTWDT010_BASE 0x98500000
+
+/*
+ * NIC
+ */
+#define CONFIG_FTMAC110_BASE 0x90900000
+
+/*
+ * NAND
+ */
+#define CONFIG_FTNANDC020_BASE 0x91000000
+
+/*
+ * I2C
+ */
+#define CONFIG_FTI2C010_BASE 0x98A00000
+
+/*
+ * SPI
+ */
+#define CONFIG_FTSSP010_BASE 0x98B00000
+#define CONFIG_FTSSP010_GPIO_BASE 0x98700000
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_FTSDC010_BASE 0x90700000
+
+/*
+ * USB
+ */
+#define CONFIG_FUSBH200_BASE 0x90A00000
+#define CONFIG_FOTG210_BASE 0x90B00000
+
+#endif
diff --git a/arch/arm/include/asm/arch-a360/pmu.h b/arch/arm/include/asm/arch-a360/pmu.h
new file mode 100644
index 0000000..d8c0e0e
--- /dev/null
+++ b/arch/arm/include/asm/arch-a360/pmu.h
@@ -0,0 +1,95 @@
+/*
+ * arch/arm/include/asm/arch-a360/pmu.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_PMU_H
+#define __ASM_ARCH_PMU_H
+
+struct a360pmu_regs {
+ uint32_t idr; /* ID register */
+ uint32_t rsvd0;
+ uint32_t osccr; /* OSC control register */
+ uint32_t pmr; /* Power mode register */
+
+ uint32_t pmcr; /* Power manager control register */
+ uint32_t peer; /* Power manager edge detection enable register */
+ uint32_t pesr; /* Power manager edge detection status register */
+ uint32_t rsvd1;
+
+ uint32_t pmsr; /* Power manager status register */
+ uint32_t pgsr; /* Power manager GPIO sleep state register */
+ uint32_t rsvd2;
+ uint32_t mcr; /* Misc. control register */
+
+ uint32_t pdcr; /* PLL/DLL control register */
+ uint32_t rsvd3[7];
+
+ uint32_t pspr[16]; /* Power manager scratch pad register */
+
+ uint32_t rsvd4[3];
+ uint32_t jssr; /* Jumper setting status register */
+};
+
+#define OSCCR_STABLE (1 << 9) /* OSCH is stable */
+#define OSCCR_DISABLE (1 << 8) /* Disable OSCH */
+
+#define PMR_FCS (1 << 2) /* Activate freq. change sequence */
+#define PMR_TURBO (1 << 1) /* Activate CPU turbo mode (2 x AHB) */
+#define PMR_SLEEP (1 << 0) /* Activate system sleep */
+
+#define PMCR_PWLOW (1 << 5) /* Mask X_powerlow_b pin source */
+#define PMCR_WAIT (1 << 4) /* Enable countdown for CPU power-off */
+#define PMCR_WDT (1 << 3) /* Use WatchDog reset */
+#define PMCR_RTC (1 << 2) /* Enable system wake-up from RTC alarm */
+#define PMCR_GPIO1 (1 << 1) /* Enable system wake-up from GPIO1 */
+#define PMCR_GPIO0 (1 << 0) /* Enable system wake-up from GPIO0 */
+
+#define PEER_GPIO1_RE (1 << 9) /* Wake-up upon Rising-Edge of GPIO1 */
+#define PEER_GPIO0_RE (1 << 8) /* Wake-up upon Rising-Edge of GPIO0 */
+#define PEER_GPIO1_FE (1 << 1) /* Wake-up upon Falling-Edge of GPIO1 */
+#define PEER_GPIO0_FE (1 << 0) /* Wake-up upon Falling-Edge of GPIO0 */
+
+#define PESR_RTC (1 << 2) /* Wake-up from RTC */
+#define PESR_GPIO1 (1 << 1) /* Wake-up from GPIO1 */
+#define PESR_GPIO0 (1 << 0) /* Wake-up from GPIO0 */
+
+#define PMSR_PWLOW (1 << 19)/* X_powerlow_b is pulled low */
+#define PMSR_ISR_PWLOW (1 << 18)/* Interrupt Status: X_powerlow_b */
+#define PMSR_ISR_FCS (1 << 17)/* Interrupt Status: FCS */
+#define PMSR_ISR_TURBO (1 << 16)/* Interrupt Status: TURBO */
+#define PMSR_WAKEUP (1 << 10)/* Wake-up from sleep mode */
+#define PMSR_WDT (1 << 9) /* Reset by WatchDog */
+#define PMSR_HW (1 << 8) /* Reset by Hardware */
+#define PMSR_NOGPI (1 << 2) /* Disable GPIO input mode */
+#define PMSR_GPIO_HELD (1 << 1) /* GPIO are held in sleep mode */
+
+#define PDCR_WAITDLLS (1 << 23)/* Wait until DLL stable */
+#define PDCR_DLLS (1 << 22)/* DLL is stable */
+#define PDCR_DDLL (1 << 21)/* Disable DLL */
+#define PDCR_PLL1MS(x) (((x) >> 11) & 0xf)/* PLL1 MS */
+#define PDCR_PLL1NS(x) (((x) >> 3) & 0x3f)/* PLL1 NS */
+#define PDCR_WAITPLL1S (1 << 2) /* Wait until PLL1 stable */
+#define PDCR_PLL1S (1 << 1) /* PLL1 is stable */
+#define PDCR_DPLL1 (1 << 0) /* Disable PLL1 */
+
+#define JSSR_PLL1NS(x) (((x) >> 2) & 0x3f)/* PLL1 NS */
+#define JSSR_OSC (1 << 0) /* PLL1/DLL are disabled */
+
+#endif
diff --git a/arch/arm/include/asm/arch-a360/scu.h b/arch/arm/include/asm/arch-a360/scu.h
new file mode 100644
index 0000000..70560c6
--- /dev/null
+++ b/arch/arm/include/asm/arch-a360/scu.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/include/asm/arch-a360/scu.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_SCU_H
+#define __ASM_ARCH_SCU_H
+
+struct a360scu_regs {
+ uint32_t idr; /* 0x00: ID Register */
+ uint32_t gcr; /* 0x04: General Control Register */
+ uint32_t ccr; /* 0x08: Clock Configuration Register */
+ uint32_t hcer; /* 0x0C: AHB Clock Enable Register */
+ uint32_t pcer; /* 0x10: APB Clock Enable Register */
+ uint32_t csr; /* 0x14: Configuration Strap Register */
+ uint32_t iomcr[4]; /* IO Mux Control Register */
+ uint32_t iopcr[2]; /* IO Parameter Control Register */
+ uint32_t cescr; /* CPU Edge Sync Control Register */
+ uint32_t expcr[3]; /* PCI-Express Control Register */
+};
+
+#define GCR_LVBC_IRQ3 (1 << 25) /* LVBC interrupt 3 propagation */
+#define GCR_LVBC_IRQ2 (1 << 24) /* LVBC interrupt 2 propagation */
+#define GCR_LVTX_RATE(x) (((x) & 0x1f) << 16) /* LVTX clock rate */
+#define GCR_LVTX_CLK_OUT (1 << 13) /* Enable LVTX clock out */
+#define GCR_USBH1_PLL_ALIVE (1 << 11) /* USB Host PLL alive */
+#define GCR_USBH0_PLL_ALIVE (1 << 10) /* USB Host PLL alive */
+#define GCR_USBH1_CLK_OUT (1 << 9) /* Enable USB Host clock out */
+#define GCR_USBH0_CLK_OUT (1 << 8) /* Enable USB Host clock out */
+#define GCR_DEBUG (1 << 7) /* Enable debug mode */
+#define GCR_DEBUG_SW (1 << 6) /* Enable software debug mode */
+#define GCR_IM (1 << 5) /* Interrupt mask */
+#define GCR_RESET (1 << 4) /* Software reset */
+
+#define CCR_LVDSTX_DSEL(x) (((x) >> 21) & 0x1f) /* LVDS Tx Clock Select */
+#define CCR_LVDSRX_DSEL(x) (((x) >> 16) & 0x1f) /* LVDS Rx Clock Select */
+#define CCR_SSP1_CKFQ(x) (((x) >> 12) & 0xf) /* SSP1 Clock Freq. */
+#define CCR_SSP0_CKFQ(x) (((x) >> 8) & 0xf) /* SSP0 Clock Freq. */
+#define CCR_SSP1_EXTCLK (1 << 7) /* SSP1 use external clock */
+#define CCR_SSP1_PCLK (0 << 7) /* SSP1 use APB clock */
+#define CCR_SSP0_EXTCLK (1 << 6) /* SSP0 use external clock */
+#define CCR_SSP0_PCLK (0 << 6) /* SSP0 use APB clock */
+#define CCR_LVDSTX_HCLK (0 << 4) /* LVDS Tx clock select */
+#define CCR_LVDSTX_PCLK (1 << 4)
+#define CCR_LVDSTX_EXTCLK (2 << 4)
+#define CCR_SDC_HCLK (2 << 2) /* SD/MMC clock select */
+#define CCR_SDC_MCLK (1 << 2)
+#define CCR_SDC_DCLK (0 << 2)
+#define CCR_LCD_EXTCLK (2 << 0) /* LCD clock select */
+#define CCR_LCD_MCLK (1 << 0)
+#define CCR_LCD_HCLK (0 << 0)
+
+#define CSR_PLL_PRESCALE (1 << 9)
+#define CSR_PCIE_MODE1 (1 << 8)
+#define CSR_PCIE_MODE0 (1 << 7)
+#define CSR_DBG_SW (1 << 6)
+#define CSR_DBG_EN (1 << 5)
+#define CSR_NAND_LP (1 << 4) /* NAND: Large Page */
+#define CSR_NAND_AL(x) (((x) >> 2) & 3) /* NAND: Address Length */
+#define CSR_NAND_16X (1 << 1) /* NAND: 16-bits */
+#define CSR_SPIBOOT (1 << 0) /* Boot from SPI(1)/NAND(0) */
+
+#endif
diff --git a/arch/arm/include/asm/arch-a369/ahbc.h b/arch/arm/include/asm/arch-a369/ahbc.h
new file mode 100644
index 0000000..5a77825
--- /dev/null
+++ b/arch/arm/include/asm/arch-a369/ahbc.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/include/asm/arch-a369/ahbc.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_AHBC_H
+#define __ASM_ARCH_AHBC_H
+
+struct a369ahbc_regs {
+ uint32_t slave[32];/* Slave Device Configurations */
+ uint32_t priority; /* Priority */
+ uint32_t idle_cnt; /* IDLE Counter */
+ uint32_t control; /* Control Register */
+ uint32_t revision; /* Revision ID */
+ uint32_t cpusao; /* CPUS (FA606TE) Address Offset */
+};
+
+#endif
diff --git a/arch/arm/include/asm/arch-a369/hardware.h b/arch/arm/include/asm/arch-a369/hardware.h
new file mode 100644
index 0000000..e71fc10
--- /dev/null
+++ b/arch/arm/include/asm/arch-a369/hardware.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/include/asm/arch-a369/hardware.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#define CONFIG_DRAM_BASE 0x10000000
+
+#define CONFIG_SRAM_BASE 0xA0000000
+#define CONFIG_SRAM_SIZE 0x00008000
+
+#define CONFIG_SCU_BASE 0x92000000
+#define CONFIG_DDR_BASE 0x93100000
+#define CONFIG_AHB_BASE 0x94000000
+#define CONFIG_SMC_BASE 0x94800000
+#define CONFIG_AHBC2_BASE 0x94200000
+
+/*
+ * Timer
+ */
+#define CONFIG_FTPWMTMR010_BASE 0x92300000
+#define CONFIG_FTPWMTMR010_IRQ 8
+
+/*
+ * UART
+ */
+#define CONFIG_FTUART010_BASE 0x92B00000
+
+/*
+ * Interrupt
+ */
+#define CONFIG_FTINTC020_BASE0 0x90100000
+#define CONFIG_FTINTC020_BASE1 0x96000000
+#define CONFIG_FTINTC020_BASE CONFIG_FTINTC020_BASE0
+
+/*
+ * I2C
+ */
+#define CONFIG_FTI2C010_BASE0 0x92900000
+#define CONFIG_FTI2C010_BASE1 0x92A00000
+#define CONFIG_FTI2C010_BASE CONFIG_FTI2C010_BASE0
+
+/*
+ * WatchDog
+ */
+#define CONFIG_FTWDT010_BASE 0x92200000
+
+/*
+ * NIC
+ */
+#define CONFIG_FTGMAC100_BASE 0x90C00000
+
+/*
+ * SPI
+ */
+#define CONFIG_FTSSP010_BASE 0x92700000
+
+/*
+ * NAND
+ */
+#define CONFIG_FTNANDC021_BASE 0x90200000
+
+/*
+ * LCD
+ */
+#define CONFIG_FTLCDC200_BASE 0x94A00000
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_FTSDC010_BASE 0x90600000
+
+/*
+ * USB
+ */
+#define CONFIG_FUSBH200_BASE 0x90800000 /* FUSBH200 */
+#define CONFIG_FOTG210_BASE 0x90900000 /* FOTG210 */
+
+#endif
diff --git a/arch/arm/include/asm/arch-a369/scu.h b/arch/arm/include/asm/arch-a369/scu.h
new file mode 100644
index 0000000..ca6f44f
--- /dev/null
+++ b/arch/arm/include/asm/arch-a369/scu.h
@@ -0,0 +1,224 @@
+/*
+ * arch/arm/include/asm/arch-a369/scu.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_SCU_H
+#define __ASM_ARCH_SCU_H
+
+struct a369scu_regs {
+ /* 0x000 ~ 0x0ff */
+ uint32_t idr; /* ID Register */
+ uint32_t revr; /* SCU revision id */
+ uint32_t hwcfg; /* HW configuration strap */
+ uint32_t cpumcfr; /* CPUM (master) freq. control */
+ uint32_t cr; /* SCU control register */
+ uint32_t sr; /* SCU status register */
+ uint32_t rsvd0[1];
+ uint32_t osccr; /* OSC control register */
+ uint32_t pllcr; /* PLL1 control register */
+ uint32_t dllcr; /* DLL control register */
+ uint32_t hclkgr; /* HCLK gating register */
+ uint32_t pclkgr; /* PCLK gating register */
+ uint32_t rsvd1[52];
+
+ /* 0x100 ~ 0x1ff */
+ uint32_t spr[16]; /* Scratchpad register */
+ uint32_t rsvd2[48];
+
+ /* 0x200 ~ 0x2ff */
+ uint32_t gpmux; /* General PINMUX */
+ uint32_t ehwcfg; /* Extended HW configuration strap */
+ uint32_t rsvd3[8];
+ uint32_t sccfg[2]; /* Special clock configuration */
+ uint32_t scer; /* Special clock enable register */
+ uint32_t rsvd;
+ uint32_t mfpmux[2];/* Multi-function pinmux */
+ uint32_t dcsrcr[2];/* Driving cap. & Slew rate control */
+ uint32_t rsvd4[3];
+ uint32_t dccr; /* Delay chain control register */
+ uint32_t pcr; /* Power control register */
+};
+
+/* HW configuration strap */
+#define HWCFG_PLL1NS(x) (((x) >> 5) & 0x3f)
+#define HWCFG_CPUM_MUL(x) ((((x) >> 3) & 0x3) > 2 ? 2 : (((x) >> 3) & 0x3))
+#define HWCFG_DLL_OFF (1 << 2)
+#define HWCFG_PLL_OFF (1 << 1)
+#define HWCFG_OSCHCNT_OFF (1 << 0)
+
+/* Extended HW configuration strap */
+#define EHWCFG_AST (1 << 15)
+#define EHWCFG_DBG (1 << 14)
+#define EHWCFG_DBGBYSW (1 << 13)
+#define EHWCFG_SATA_HOST (1 << 12)
+#define EHWCFG_PCIE_RC (1 << 11)
+#define EHWCFG_NAND_BK(x) (((x) >> 9) & 0x3)
+#define EHWCFG_NAND_BK16 (0 << 9) /* 16 page per block */
+#define EHWCFG_NAND_BK32 (1 << 9) /* 32 page per block */
+#define EHWCFG_NAND_BK64 (2 << 9) /* 64 page per block */
+#define EHWCFG_NAND_BK128 (3 << 9) /* 128 page per block */
+#define EHWCFG_NAND_PS(x) (((x) >> 7) & 0x3)
+#define EHWCFG_NAND_PS512 (0 << 7) /* 512 bytes per page */
+#define EHWCFG_NAND_PS2K (1 << 7) /* 2048 bytes per page */
+#define EHWCFG_NAND_PS4K (2 << 7) /* 4096 bytes per page */
+#define EHWCFG_NAND_AC(x) (((x) >> 5) & 0x3)
+#define EHWCFG_NAND_AC3 (0 << 5) /* addr cycle = 3 */
+#define EHWCFG_NAND_AC4 (1 << 5) /* addr cycle = 4 */
+#define EHWCFG_NAND_AC5 (2 << 5) /* addr cycle = 5 */
+#define EHWCFG_NAND_16X (1 << 4) /* NAND: 16bit mode */
+#define EHWCFG_EXTCPU (1 << 2) /* external cpu mode */
+#define EHWCFG_BOOT_NAND (0 << 0) /* boot from nand */
+#define EHWCFG_BOOT_SPI (1 << 0) /* boot from spi */
+#define EHWCFG_BOOT_NOR (2 << 0) /* boot from nor */
+
+/* General PINMUX */
+#define GPMUX_PLLGMAC (1 << 15) /* PLL = GMAC PLL(PLL2) */
+#define GPMUX_EXTIRQ (1 << 14) /* re-direct irq to external cpu */
+#define GPMUX_CS0REL (1 << 13) /* release CS0 memory space */
+#define GPMUX_IOEN (1 << 12) /* IO output enable */
+#define GPMUX_CPUS_START (1 << 11) /* start slave cpu (fa606te) */
+#define GPMUX_SATA_RESET (1 << 8)
+#define GPMUX_PDD (1 << 7) /* power-down detection enable */
+#define GPMUX_USBH_ALIVE (1 << 6)
+#define GPMUX_USBH_PHYOSC (1 << 5)
+#define GPMUX_OTG_ALIVE (1 << 4)
+#define GPMUX_OTG_PHYOSC (1 << 3)
+#define GPMUX_IRQMASK1 (1 << 2)
+#define GPMUX_IRQMASK0 (1 << 1)
+#define GPMUX_RESET (1 << 0)
+
+#define GPMUX_DEFAULT 0x1078 /* USB keep alive + IO output */
+
+/* HCLK gating register */
+#define HCLKGR_CPUM (1 << 31)
+#define HCLKGR_CPUS (1 << 30)
+#define HCLKGR_AHBTSIF (1 << 28)
+#define HCLKGR_AHBC3 (1 << 27)
+#define HCLKGR_AHBC2 (1 << 26)
+#define HCLKGR_AHBC1 (1 << 25)
+#define HCLKGR_APBBRG (1 << 24)
+#define HCLKGR_NANDC (1 << 23)
+#define HCLKGR_SMC (1 << 22)
+#define HCLKGR_DMAC1 (1 << 21)
+#define HCLKGR_DMAC0 (1 << 20)
+#define HCLKGR_H264 (1 << 19)
+#define HCLKGR_MPEG4 (1 << 18)
+#define HCLKGR_2DGRA (1 << 17)
+#define HCLKGR_LCD (1 << 16)
+#define HCLKGR_ISP (1 << 15)
+#define HCLKGR_AES (1 << 14)
+#define HCLKGR_GMAC (1 << 13)
+#define HCLKGR_SATAH (1 << 12)
+#define HCLKGR_SATAD (1 << 11)
+#define HCLKGR_PCIE (1 << 10)
+#define HCLKGR_USBH (1 << 9)
+#define HCLKGR_OTG (1 << 8)
+#define HCLKGR_SD1 (1 << 7)
+#define HCLKGR_SD0 (1 << 6)
+#define HCLKGR_IDE (1 << 5)
+#define HCLKGR_EM1 (1 << 4)
+#define HCLKGR_EM0 (1 << 3)
+#define HCLKGR_IRQ1 (1 << 2)
+#define HCLKGR_IRQ0 (1 << 1)
+#define HCLKGR_SCU (1 << 0)
+
+/* Special clock configuration */
+#define SCCFG0_SATA_25M (1 << 29)
+#define SCCFG0_SATA_OFF (1 << 28)
+#define SCCFG0_GMAC_CLK_IO (1 << 27)
+#define SCCFG0_GMAC_PLL_OFF (1 << 26)
+#define SCCFG0_GMAC_PLL_NS(x) (((x) & 0x3f) << 20)
+#define SCCFG0_ISP_BFREQ(x) (((x) & 0xf) << 16)
+#define SCCFG0_ISP_AFREQ(x) (((x) & 0xf) << 12)
+#define SCCFG0_IDE_FREQ(x) (((x) & 0xf) << 8)
+#define SCCFG0_EXTAHB_FREQ(x) (((x) & 0xf) << 4)
+#define SCCFG0_EXTAHB_MASK 0xf0
+#define SCCFG0_LCD_SCK_AHB (0 << 2) /* LCD scalar clock source */
+#define SCCFG0_LCD_SCK_APB (1 << 2)
+#define SCCFG0_LCD_SCK_EXT (2 << 2)
+#define SCCFG0_LCD_CK_AHB (0 << 0) /* LCD clock source */
+#define SCCFG0_LCD_CK_APB (1 << 0)
+#define SCCFG0_LCD_CK_EXT (2 << 0)
+
+#define SCCFG0_DEFAULT 0x26877330
+
+#define SCCFG1_SD1_CK_2AHB (0 << 18) /* SD1 clock source */
+#define SCCFG1_SD1_CK_3APB (1 << 18) /* SD1 clock source */
+#define SCCFG1_SD1_CK_AHB (2 << 18) /* SD1 clock source */
+#define SCCFG1_SD0_CK_2AHB (0 << 16) /* SD0 clock source */
+#define SCCFG1_SD0_CK_3APB (1 << 16) /* SD0 clock source */
+#define SCCFG1_SD0_CK_AHB (2 << 16) /* SD0 clock source */
+#define SCCFG1_SSP1_CK_EXT (1 << 12) /* SSP1 clock source */
+#define SCCFG1_SSP1_FREQ(x) (((x) & 0xf) << 8)
+#define SCCFG1_SSP0_CK_EXT (1 << 4) /* SSP0 clock source */
+#define SCCFG1_SSP0_FREQ(x) (((x) & 0xf) << 0)
+
+#define SCCFG1_DEFAULT \
+ (SCCFG1_SD1_CK_AHB | SCCFG1_SD0_CK_AHB \
+ | SCCFG1_SSP1_FREQ(0xA) | SCCFG1_SSP0_FREQ(0xA))
+
+/* Special clock enable register */
+#define SCER_GMAC125M (1 << 13)
+#define SCER_LCDSC (1 << 12) /* LCD scalar clock */
+#define SCER_LCD (1 << 11)
+#define SCER_ISPB (1 << 10)
+#define SCER_ISPA (1 << 9)
+#define SCER_IDE (1 << 8)
+#define SCER_EXTAHB (1 << 7)
+#define SCER_DDRD (1 << 6)
+#define SCER_DDRF (1 << 5)
+#define SCER_SD1 (1 << 4)
+#define SCER_SD0 (1 << 3)
+#define SCER_SSP1 (1 << 2)
+#define SCER_SSP0 (1 << 1)
+#define SCER_TSC (1 << 0)
+
+/* Multi-function pinmux register */
+#define MFPMUX0_EBI(x) (((x) & 0x3) << 10)
+#define MFPMUX0_LCD(x) (((x) & 0x3) << 8)
+#define MFPMUX0_TS(x) (((x) & 0x3) << 6)
+#define MFPMUX0_ISP(x) (((x) & 0x3) << 4)
+#define MFPMUX0_SATA(x) (((x) & 0x3) << 2)
+#define MFPMUX0_EXTAHB(x) (((x) & 0x3) << 0)
+
+#define MFPMUX0_DEFAULT 0x241 /* SD0 disabled, SD1 enabled */
+
+#define MFPMUX1_KBC(x) (((x) & 0x3) << 20)
+#define MFPMUX1_GPIO0(x) (((x) & 0x3) << 18)
+#define MFPMUX1_I2C1(x) (((x) & 0x3) << 16)
+#define MFPMUX1_PWM1(x) (((x) & 0x3) << 14)
+#define MFPMUX1_PWM0(x) (((x) & 0x3) << 12)
+#define MFPMUX1_GMAC(x) (((x) & 0x3) << 10)
+#define MFPMUX1_SSP1(x) (((x) & 0x3) << 8)
+#define MFPMUX1_SSP0(x) (((x) & 0x3) << 6)
+#define MFPMUX1_UART3(x) (((x) & 0x3) << 4)
+#define MFPMUX1_UART2(x) (((x) & 0x3) << 2)
+#define MFPMUX1_UART1(x) (((x) & 0x3) << 0)
+
+/* PLL1 control register */
+#define PLLCR_NS(x) (((x) >> 24) & 0x3f)
+#define PLLCR_STABLE (1 << 1)
+#define PLLCR_OFF (1 << 0)
+
+/* DLL control register */
+#define DLLCR_STABLE (1 << 1)
+#define DLLCR_ON (1 << 0)
+
+#endif
diff --git a/arch/arm/include/asm/arch-faraday/clock.h b/arch/arm/include/asm/arch-faraday/clock.h
new file mode 100644
index 0000000..74db551
--- /dev/null
+++ b/arch/arm/include/asm/arch-faraday/clock.h
@@ -0,0 +1,41 @@
+/*
+ * asm/arch-faraday/clock.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARCH_FARADAY_CLOCK_H
+#define _ASM_ARCH_FARADAY_CLOCK_H
+
+/* Clock identifiers */
+enum clk_id {
+ SYS_CLK,
+ AHB_CLK,
+ APB_CLK,
+ CPU_CLK,
+ I2C_CLK,
+ MMC_CLK,
+ SDC_CLK,
+ SPI_CLK,
+ SSP_CLK,
+};
+
+void clock_init(void);
+ulong clock_get_rate(enum clk_id id);
+
+#endif /* _ASM_ARCH_FARADAY_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-faraday/interrupt.h b/arch/arm/include/asm/arch-faraday/interrupt.h
new file mode 100644
index 0000000..8a38946
--- /dev/null
+++ b/arch/arm/include/asm/arch-faraday/interrupt.h
@@ -0,0 +1,29 @@
+/*
+ * asm/arch-faraday/interrupt.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARCH_FARADAY_INTERRUPT_H
+#define _ASM_ARCH_FARADAY_INTERRUPT_H
+
+void irq_set_trigger(int irq, int edge, int low);
+void irq_enable(int irq);
+void irq_disable(int irq);
+
+#endif /* _ASM_ARCH_FARADAY_INTERRUPT_H */
diff --git a/board/faraday/a360evb/Makefile b/board/faraday/a360evb/Makefile
new file mode 100644
index 0000000..75a5668
--- /dev/null
+++ b/board/faraday/a360evb/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian at popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := board.o clock.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/faraday/a360evb/board.c b/board/faraday/a360evb/board.c
new file mode 100644
index 0000000..f241bb3
--- /dev/null
+++ b/board/faraday/a360evb/board.c
@@ -0,0 +1,72 @@
+/*
+ * board/faraday/a360evb/board.c
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <spi.h>
+#include <nand.h>
+#include <netdev.h>
+#include <asm/arch/scu.h>
+#include <faraday/ftsdc010.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct a360scu_regs *scu = (void __iomem *)CONFIG_SCU_BASE;
+
+/*
+ * pinmux
+ */
+static void pinmux_init(void)
+{
+ writel(0x00555500, &scu->iomcr[3]);
+ setbits_le32(&scu->iomcr[0], 0x800002AA);
+ setbits_le32(&scu->iomcr[1], 0x82AAAAAA);
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_early_init_f(void)
+{
+ pinmux_init();
+ clock_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_arch_number = MACH_TYPE_FARADAY;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = CONFIG_SYS_SDRAM_SIZE;
+
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+ return ftmac110_initialize(bd);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FTSDC010
+ return ftsdc010_mmc_init(0);
+#else
+ return 0;
+#endif
+}
diff --git a/board/faraday/a360evb/clock.c b/board/faraday/a360evb/clock.c
new file mode 100644
index 0000000..a52ff09
--- /dev/null
+++ b/board/faraday/a360evb/clock.c
@@ -0,0 +1,72 @@
+/*
+ * board/faraday/a360evb/clock.c
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/scu.h>
+#include <asm/arch/pmu.h>
+#include <asm/arch-faraday/clock.h>
+
+static struct a360scu_regs *scu = (void __iomem *)CONFIG_SCU_BASE;
+static struct a360pmu_regs *pmu = (void __iomem *)CONFIG_PMU_BASE;
+
+static inline ulong clk_get_rate_sys(void)
+{
+ return 40000000; /* 40 MHz */
+}
+
+static inline ulong clk_get_rate_ahb(void)
+{
+ return clk_get_rate_sys() * ((readl(&pmu->pdcr) >> 3) & 0x3f) / 8;
+}
+
+static inline ulong clk_get_rate_apb(void)
+{
+ return clk_get_rate_ahb() >> 1;
+}
+
+static inline ulong clk_get_rate_cpu(void)
+{
+ uint32_t s = readl(&scu->csr);
+ uint32_t p = readl(&pmu->pmr);
+ ulong clk = clk_get_rate_ahb();
+ ulong mul = (s & CSR_PLL_PRESCALE) ? 2 : 4;
+
+ return (p & PMR_TURBO) ? (clk * mul) : clk;
+}
+
+ulong clock_get_rate(enum clk_id id)
+{
+ switch (id) {
+ case SYS_CLK:
+ return clk_get_rate_sys();
+ case AHB_CLK:
+ return clk_get_rate_ahb();
+ case APB_CLK:
+ return clk_get_rate_apb();
+ case CPU_CLK:
+ return clk_get_rate_cpu();
+ case I2C_CLK:
+ return clk_get_rate_apb();
+ case MMC_CLK:
+ case SDC_CLK:
+ return clk_get_rate_ahb();
+ case SPI_CLK:
+ case SSP_CLK:
+ return clk_get_rate_apb();
+ default:
+ return 0;
+ }
+}
+
+void clock_init(void)
+{
+ gd->arch.timer_rate_hz = clk_get_rate_apb();
+}
diff --git a/board/faraday/a360evb/config.mk b/board/faraday/a360evb/config.mk
new file mode 100644
index 0000000..eb1a258
--- /dev/null
+++ b/board/faraday/a360evb/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2010
+# Dante Su <dantesu at faraday-tech.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+ALL += $(obj)u-boot.img
+
+# Environment variables in NAND
+#ifeq ($(ENV),NAND)
+#PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
+#else
+#PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
+#endif
diff --git a/board/faraday/a360evb/lowlevel_init.S b/board/faraday/a360evb/lowlevel_init.S
new file mode 100644
index 0000000..0d6c43f
--- /dev/null
+++ b/board/faraday/a360evb/lowlevel_init.S
@@ -0,0 +1,33 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2013
+ * Faraday Technology Inc. <www.faraday-tech.com>
+ * Dante Su <dantesu at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+ mov pc,lr
diff --git a/board/faraday/a369evb/Makefile b/board/faraday/a369evb/Makefile
new file mode 100644
index 0000000..75a5668
--- /dev/null
+++ b/board/faraday/a369evb/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian at popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := board.o clock.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/faraday/a369evb/board.c b/board/faraday/a369evb/board.c
new file mode 100644
index 0000000..260cac3
--- /dev/null
+++ b/board/faraday/a369evb/board.c
@@ -0,0 +1,176 @@
+/*
+ * board/faraday/a369evb/board.c
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <spi.h>
+#include <nand.h>
+#include <netdev.h>
+#include <malloc.h>
+
+#include <asm/arch/scu.h>
+#include <faraday/ftsmc020.h>
+#include <faraday/ftlcdc200.h>
+#include <faraday/ftsdc010.h>
+#include <faraday/ftnandc021.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ftsmc020 *smc = (void __iomem *)CONFIG_SMC_BASE;
+static struct a369scu_regs *scu = (void __iomem *)CONFIG_SCU_BASE;
+static struct ftlcdc200_regs *lcd = (void __iomem *)CONFIG_FTLCDC200_BASE;
+
+/* System Control Uint (pinmux) */
+static void scu_init(void)
+{
+ /* If it's an external CPU */
+ if (readl(&scu->ehwcfg) & EHWCFG_EXTCPU) {
+ writel(HCLKGR_CPUM | HCLKGR_CPUS | HCLKGR_ISP,
+ &scu->hclkgr);
+ setbits_le32(&scu->gpmux, GPMUX_EXTIRQ);
+ } else {
+#ifdef CONFIG_SUPP_EXTAHB
+ /* Enable external AHB */
+ writel(HCLKGR_CPUS, &scu->hclkgr);
+ writel(GPMUX_DEFAULT, &scu->gpmux);
+ clrbits_le32(&scu->sccfg[0], SCCFG0_EXTAHB_MASK);
+ setbits_le32(&scu->sccfg[0], SCCFG0_EXTAHB_FREQ(8));
+#else
+ /* Enable SD1 */
+ writel(MFPMUX0_DEFAULT, &scu->mfpmux[0]);
+#endif
+ }
+
+ /* Clock Setup: SD = AHB, SSP = APB (SPI mode) */
+ writel(SCCFG1_DEFAULT, &scu->sccfg[1]);
+
+ /* Enable LCD for I2C/TVEncode work-around */
+ /* ... Clock DIV=32 */
+ writel(PCR_DIV(32), &lcd->pcr);
+ /* ... Enable LCD */
+ writel(FER_EN | FER_ON, &lcd->fer);
+}
+
+/*
+ * Static Memory Controller (NOR Flash)
+ */
+static void smc_init(void)
+{
+ /* 1. NOR flash */
+ /* Bank 0: base=0x00000000, size=64MB, 16bits */
+ writel(FTSMC020_BANK_ENABLE | FTSMC020_BANK_BASE(0)
+ | FTSMC020_BANK_SIZE_64M | FTSMC020_BANK_MBW_16,
+ &smc->bank[0].cr);
+ /* Bank 0: worst timing */
+ writel(FTSMC020_TPR_WORST, &smc->bank[0].tpr);
+
+ /* 2. Unused Area */
+ writel(0, &smc->bank[1].cr);
+ writel(FTSMC020_TPR_WORST, &smc->bank[1].tpr);
+ writel(0, &smc->bank[2].cr);
+ writel(FTSMC020_TPR_WORST, &smc->bank[2].tpr);
+ writel(0, &smc->bank[3].cr);
+ writel(FTSMC020_TPR_WORST, &smc->bank[3].tpr);
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_early_init_f(void)
+{
+ scu_init();
+ smc_init();
+ clock_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_arch_number = MACH_TYPE_FARADAY;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = CONFIG_SYS_SDRAM_SIZE;
+
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+#ifdef CONFIG_USB_ETHER
+ return usb_eth_initialize(bd);
+#elif defined(CONFIG_FTGMAC100)
+ return ftgmac100_initialize(bd);
+#endif
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FTSDC010
+ return ftsdc010_mmc_init(0);
+#else
+ return 0;
+#endif
+}
+
+#ifdef CONFIG_SYS_NAND_SELF_INIT
+void board_nand_init(void)
+{
+ int alen, devnum = 0;
+ struct mtd_info *mtd = &nand_info[devnum];
+ struct nand_chip *chip;
+ uint32_t iobase = CONFIG_SYS_NAND_BASE;
+ uint32_t ehwcfg = readl(&scu->ehwcfg);
+
+ chip = calloc(1, sizeof(*chip));
+ if (!chip)
+ return;
+ mtd->priv = chip;
+
+ /* page size */
+ switch (EHWCFG_NAND_PS(ehwcfg)) {
+ case 0:
+ chip->page_shift = 9; /* 512 */
+ break;
+ case 1:
+ chip->page_shift = 11; /* 2048 */
+ break;
+ default:
+ chip->page_shift = 12; /* 4096 */
+ break;
+ }
+
+ /* block size */
+ chip->phys_erase_shift = chip->page_shift + 4
+ + EHWCFG_NAND_BK(ehwcfg);
+
+ /* address length/cycle */
+ alen = 3 + EHWCFG_NAND_AC(ehwcfg);
+
+ if (ftnandc021_init(chip, iobase, alen))
+ goto bni_err;
+
+ if (nand_scan(mtd, CONFIG_SYS_NAND_MAX_CHIPS))
+ goto bni_err;
+
+ nand_register(devnum);
+
+ return;
+
+bni_err:
+ free(chip);
+}
+#endif /* #ifdef CONFIG_SYS_NAND_SELF_INIT */
diff --git a/board/faraday/a369evb/clock.c b/board/faraday/a369evb/clock.c
new file mode 100644
index 0000000..843a41f
--- /dev/null
+++ b/board/faraday/a369evb/clock.c
@@ -0,0 +1,80 @@
+/*
+ * board/faraday/a369evb/clock.c
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/scu.h>
+#include <asm/arch-faraday/clock.h>
+
+static struct a369scu_regs *scu = (void __iomem *)CONFIG_SCU_BASE;
+
+static inline ulong clk_get_rate_sys(void)
+{
+ return 33000000; /* 33 MHz */
+}
+
+static inline ulong clk_get_rate_ahb(void)
+{
+ return (clk_get_rate_sys() * PLLCR_NS(readl(&scu->pllcr))) >> 3;
+}
+
+static inline ulong clk_get_rate_apb(void)
+{
+ return clk_get_rate_ahb() >> 1;
+}
+
+static inline ulong clk_get_rate_cpu(void)
+{
+ ulong clk = clk_get_rate_ahb();
+
+#ifndef CONFIG_A369_FA606TE_PLATFORM
+ /* If it's an internal CPU */
+ if (readl(&scu->ehwcfg) & EHWCFG_EXTCPU)
+ return clk;
+ /*
+ * Since the master would stop immediately after
+ * kicking off slave cpu, so we could check the
+ * GPMUX_CPUS_START to determine if it's a master.
+ */
+ if (!(readl(&scu->gpmux) & GPMUX_CPUS_START))
+ clk = clk << HWCFG_CPUM_MUL(readl(&scu->hwcfg));
+#endif
+
+ return clk;
+}
+
+ulong clock_get_rate(enum clk_id id)
+{
+ switch (id) {
+ case SYS_CLK:
+ return clk_get_rate_sys();
+ case AHB_CLK:
+ return clk_get_rate_ahb();
+ case APB_CLK:
+ return clk_get_rate_apb();
+ case CPU_CLK:
+ return clk_get_rate_cpu();
+ case I2C_CLK:
+ return clk_get_rate_apb();
+ case MMC_CLK:
+ case SDC_CLK:
+ return clk_get_rate_ahb();
+ case SPI_CLK:
+ case SSP_CLK:
+ return clk_get_rate_apb();
+ default:
+ return 0;
+ }
+}
+
+void clock_init(void)
+{
+ gd->arch.timer_rate_hz = clk_get_rate_apb();
+}
diff --git a/board/faraday/a369evb/config.mk b/board/faraday/a369evb/config.mk
new file mode 100644
index 0000000..eb1a258
--- /dev/null
+++ b/board/faraday/a369evb/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2010
+# Dante Su <dantesu at faraday-tech.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+ALL += $(obj)u-boot.img
+
+# Environment variables in NAND
+#ifeq ($(ENV),NAND)
+#PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
+#else
+#PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
+#endif
diff --git a/board/faraday/a369evb/lowlevel_init.S b/board/faraday/a369evb/lowlevel_init.S
new file mode 100644
index 0000000..0e02636
--- /dev/null
+++ b/board/faraday/a369evb/lowlevel_init.S
@@ -0,0 +1,136 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2013
+ * Faraday Technology Inc. <www.faraday-tech.com>
+ * Dante Su <dantesu at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <common.h>
+#include <version.h>
+
+ .macro _v3_mw32
+
+ ldr r0, =0x1008
+ ldr r3, =0x1108
+_v3_mw32_loop:
+ cmp r0, r3
+ movhs r1, #0
+ ldrlo r1, [r0, #0]
+ ldrlo r2, [r0, #4]
+ teq r1, #0
+ strne r2, [r1, #0]
+ addne r0, #8
+ bne _v3_mw32_loop
+
+ .endm /* _v3_mw32 */
+
+ .macro _sdram_enable
+
+ /* Clear SDRAM CKE, GPIO Hold, READ Hold */
+ ldr r0, =CONFIG_SCU_BASE
+ mov r1, #7
+ str r1, [r0, #0x14]
+
+ /* Wait until sdram ready */
+ ldr r0, =CONFIG_DDR_BASE
+_sdram_wait:
+ ldr r1, [r0, #0x04]
+ teq r1, #0x100
+ bne _sdram_wait
+
+ .endm /* _sdram_enable */
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+ /* Check image header */
+ ldr r1, =0x1000
+ ldr r0, [r1, #0]
+ ldr r1, =0x00484946 /* "FIH\0" */
+ ldr r2, =0x33333639 /* "3369" */
+ teq r0, r1
+ teqne r0, r2
+ bne _exit
+ _v3_mw32
+ _sdram_enable
+
+#if 1
+ /* Create a shadow copy onto SDRAM (limited to 512K) */
+ mov r0, #0 /* r0 <- start of source */
+ ldr r1, =CONFIG_AHB_BASE
+ ldr r2, [r1,#0x18]
+ bic r1, r2, #0x000f0000 /* r1 <- SDRAM base */
+ mov r2, #0x80000 /* r2 <- source end address (512KB) */
+
+_copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble _copy_loop
+#else
+ /* Adjust lr(r14) to the remapped address */
+ ldr r0, =CONFIG_AHB_BASE
+ ldr r1, [r0,#0x18] /* r1 = AHB slave 6 */
+ bic r1, r1, #0xff000000
+ bic r1, r1, #0x00f00000
+ lsr r1, r1, #16
+ add r1, r1, #20
+ mov r2, #1
+ lsl r2, r2, r1
+ add lr, lr, r2
+#endif
+
+ /* AHB remap */
+ mov r0, #0
+ ldr r1, =CONFIG_AHB_BASE
+ ldr r2, =CONFIG_DDR_BASE
+ /* magic (r5) = REG32(0x00) XOR 0xFFFFFFFF */
+ ldr r5, [r0, #0]
+ ldr r3, =0xffffffff
+ eor r5, r5, r3
+ /* r3 = REG32(CONFIG_IOBASE_DDR + 0x10) & 0x00FFFFFF */
+ ldr r3, [r2, #0x10]
+ bic r3, #0xff000000
+ /* r4 = 0x00100f01 */
+ ldr r4, =0x00100f01
+
+ /*
+ * invalidate i-cache all to make sure the codes bellow
+ * to be fetched into a single 32-bytes cache line
+ */
+ mcr p15, 0, r0, c7, c5, 0
+
+ .align 5
+
+ str r3, [r2, #0x10] /* REG32(CONFIG_IOBASE_DDR + 0x10) &= 0x00FFFFFF */
+ str r4, [r1, #0x88] /* REG32(CONFIG_IOBASE_AHB + 0x88) = 0x00100F01 */
+
+_remap_wait:
+ str r5, [r0, #0]
+ ldr r1, [r0, #0]
+ teq r1, r5
+ bne _remap_wait /* while(magic != REG32(addr)) */
+
+_exit:
+ mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index c0c4282..23a0448 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -72,6 +72,9 @@ mini2440 arm arm920t mini2440 friendl
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
omap1510inn arm arm925t - ti
+a360 arm faraday a360evb faraday a360
+a369 arm faraday a369evb faraday a369
+a369_fa606te arm faraday a369evb faraday a369
integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap:CM926EJ_S
integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp:CM924EJ_S
aspenite arm arm926ejs - Marvell armada100
diff --git a/include/common.h b/include/common.h
index ec3bf0d..514c531 100644
--- a/include/common.h
+++ b/include/common.h
@@ -111,6 +111,8 @@ typedef volatile unsigned char vu_char;
#include <asm/arch/hardware.h>
#endif
#ifdef CONFIG_FARADAY
+#include <asm/arch/hardware.h>
+#include <asm/arch-faraday/clock.h>
#include <asm/arch-faraday/interrupt.h>
#endif
diff --git a/include/configs/a360.h b/include/configs/a360.h
new file mode 100644
index 0000000..7d11734
--- /dev/null
+++ b/include/configs/a360.h
@@ -0,0 +1,60 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+/* Support USB RNDIS Ethernet */
+/* #define CONFIG_SUPP_USB_RNDIS */
+
+/* Support interrupt */
+/* #define CONFIG_USE_IRQ */
+
+/* Disable MMU/D-CACHE */
+/* #define CONFIG_SYS_DCACHE_OFF */
+
+/*
+ * Memory Configuration
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE SZ_64M
+
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_16M)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + SZ_32M)
+
+/* SPI Flash (FTSSP010 v1.18) */
+#define CONFIG_FTSSP010_GPIO_PIN 26
+
+/* EEPROM */
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+
+/*
+ * USB Configuration
+ */
+#define CONFIG_USB_EHCI_BASE CONFIG_FUSBH200_BASE
+#ifdef CONFIG_SUPP_USB_RNDIS
+# define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#else
+# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+# define CONFIG_USB_EHCI_BASE_LIST \
+ { CONFIG_FUSBH200_BASE, CONFIG_FOTG210_BASE }
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE SZ_64K
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ /* Default network configuration */ \
+ "ethaddr=00:41:71:00:00:50\0" \
+ "serverip=10.0.0.128\0" \
+ "ipaddr=10.0.0.192\0"
+
+/*
+ * Faraday Common Configuration
+ */
+#include "faraday-common.h"
+
+#endif
diff --git a/include/configs/a369-common.h b/include/configs/a369-common.h
new file mode 100644
index 0000000..06d6cb0
--- /dev/null
+++ b/include/configs/a369-common.h
@@ -0,0 +1,75 @@
+#ifndef __CONFIG_A369_COMMON_H
+#define __CONFIG_A369_COMMON_H
+
+#include <asm/hardware.h>
+
+/* A369 Platform Common Configuration */
+
+/* Memory Configuration */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE SZ_512M
+
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_16M)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + SZ_32M)
+
+/* Interrupt controler */
+#ifndef CONFIG_FTINTC020_BASE
+#define CONFIG_FTINTC020_BASE CONFIG_FTINTC020_BASE0
+#endif
+
+/* NAND Flash */
+#define CONFIG_NAND_K9F4G08U0B_AC1 0x02240264
+#define CONFIG_NAND_K9F4G08U0B_AC2 0x42054209
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max. num. of devices */
+#define CONFIG_SYS_FTNANDC021_TIMING \
+ { CONFIG_NAND_K9F4G08U0B_AC1, CONFIG_NAND_K9F4G08U0B_AC2 }
+
+/* SPI Flash (FTSSP010 v1.18) */
+#define CONFIG_FTSSP010_GPIO_BASE 0x92600000 /* GPIO 1 */
+#define CONFIG_FTSSP010_GPIO_PIN 27
+
+/* NOR Flash */
+/*
+#define PHYS_FLASH_SIZE SZ_64M
+#define CONFIG_SYS_FLASH_BASE 0x20000000
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
+*/
+
+/* EEPROM */
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+
+/*
+ * USB Configuration
+ */
+#define CONFIG_USB_EHCI_BASE CONFIG_FUSBH200_BASE
+#ifdef CONFIG_SUPP_USB_RNDIS
+# define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#else
+# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+# define CONFIG_USB_EHCI_BASE_LIST \
+ { CONFIG_FUSBH200_BASE, CONFIG_FOTG210_BASE }
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x07FC0000
+#define CONFIG_ENV_OFFSET_REDUND 0x07FE0000
+#define CONFIG_ENV_SIZE SZ_64K
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ /* Default network configuration */ \
+ "ethaddr=00:41:71:00:00:50\0" \
+ "serverip=10.0.0.128\0" \
+ "ipaddr=10.0.0.192\0"
+
+/*
+ * Faraday Common Configuration
+ */
+#include "faraday-common.h"
+
+#endif
diff --git a/include/configs/a369.h b/include/configs/a369.h
new file mode 100644
index 0000000..da7856e
--- /dev/null
+++ b/include/configs/a369.h
@@ -0,0 +1,34 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_A369_PLATFORM
+
+/* Support USB-EHCI */
+#define CONFIG_SUPP_EHCI_FARADAY
+
+/* Support external AHB */
+/* #define CONFIG_SUPP_EXTAHB */
+
+/* Support USB RNDIS Ethernet */
+/* #define CONFIG_SUPP_USB_RNDIS */
+
+/* Support VGA Console */
+/* #define CONFIG_SUPP_VGA_CONSOLE */
+
+/* Support interrupt */
+/* #define CONFIG_USE_IRQ */
+
+/* Disable MMU/D-CACHE */
+/* #define CONFIG_SYS_DCACHE_OFF */
+
+/* Support runtime switching to built-in slave core: FA606TE */
+#define CONFIG_CMD_FA606
+
+/* Autoboot */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTCOMMAND "bootfa nand linux"
+
+/* A369 common configuration */
+#include "a369-common.h"
+
+#endif
diff --git a/include/configs/a369_fa606te.h b/include/configs/a369_fa606te.h
new file mode 100644
index 0000000..c549edb
--- /dev/null
+++ b/include/configs/a369_fa606te.h
@@ -0,0 +1,31 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_A369_FA606TE_PLATFORM
+
+/* Support external AHB */
+/* #define CONFIG_SUPP_EXTAHB */
+
+/* Support USB RNDIS Ethernet */
+/* #define CONFIG_SUPP_USB_RNDIS */
+
+/* Support VGA Console */
+/* #define CONFIG_SUPP_VGA_CONSOLE */
+
+/* Support interrupt */
+/* #define CONFIG_USE_IRQ */
+
+/* Disable MMU/D-CACHE */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Disable I-CACHE */
+#define CONFIG_SYS_ICACHE_OFF
+
+/* Set interrupt controler to FTINCT020:1 */
+#undef CONFIG_FTINTC020_BASE
+#define CONFIG_FTINTC020_BASE CONFIG_FTINTC020_BASE1
+
+/* A369 common configuration */
+#include "a369-common.h"
+
+#endif
diff --git a/include/configs/faraday-common.h b/include/configs/faraday-common.h
new file mode 100644
index 0000000..64e8a71
--- /dev/null
+++ b/include/configs/faraday-common.h
@@ -0,0 +1,243 @@
+/*
+ * include/configs/faraday-common.h
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __CONFIG_FARADAY_COMMON_H
+#define __CONFIG_FARADAY_COMMON_H
+
+#include <asm/mach-types.h>
+
+#ifndef MACH_TYPE_FARADAY
+#define MACH_TYPE_FARADAY 758
+#endif
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program.
+ * Since the linker has to swallow that define, we must use a pure
+ * hex number here!
+ */
+#define CONFIG_SYS_TEXT_BASE 0x00800000
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+/*
+ * Initial stack pointer: GENERATED_GBL_DATA_SIZE in internal SRAM.
+ * Inside the board_init_f, the gd is first assigned to
+ * (CONFIG_SYS_INIT_SP_ADDR) & ~0x07) and then relocated to DRAM
+ * while calling relocate_code.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_STACKSIZE SZ_512K
+#define CONFIG_STACKSIZE_IRQ SZ_32K
+#define CONFIG_STACKSIZE_FIQ SZ_32K
+
+#define CONFIG_SYS_MALLOC_LEN SZ_8M
+#define CONFIG_SYS_MONITOR_LEN SZ_512K
+
+/*
+ * CPU
+ */
+#define CONFIG_FARADAY
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#ifndef CONFIG_SYS_DCACHE_OFF
+# define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
+#endif
+
+/*
+ * Interrupt
+ */
+#if defined(CONFIG_USE_IRQ) && defined(CONFIG_FTI2C010_BASE)
+# define CONFIG_FTINTC020
+#endif
+
+/*
+ * Timer
+ */
+#define CONFIG_SYS_HZ 1000
+
+#ifdef CONFIG_FTTMR010_BASE
+# define CONFIG_FTTMR010
+#endif /* CONFIG_FTTMR010_BASE */
+
+#ifdef CONFIG_FTPWMTMR010_BASE
+# define CONFIG_FTPWMTMR010
+#endif /* CONFIG_FTPWMTMR010_BASE */
+
+/*
+ * Serial Info
+ */
+#ifdef CONFIG_FTUART010_BASE
+# define CONFIG_SYS_NS16550
+# define CONFIG_SYS_NS16550_SERIAL
+# ifndef CONFIG_SYS_NS16550_CLK
+# define CONFIG_SYS_NS16550_CLK 18432000
+# endif
+# define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_BASE
+# define CONFIG_SYS_NS16550_MEM32
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# define CONFIG_CONS_INDEX 1
+# define CONFIG_BAUDRATE 38400
+# undef CONFIG_HWFLOW
+# undef CONFIG_MODEM_SUPPORT
+#endif /* #ifdef CONFIG_FTUART010_BASE */
+
+/*
+ * NIC driver
+ */
+#ifdef CONFIG_FTMAC110_BASE
+# define CONFIG_FTMAC110
+#endif
+#ifdef CONFIG_FTGMAC100_BASE
+# define CONFIG_FTGMAC100
+# define CONFIG_FTGMAC100_EGIGA /* Used by Ratbert's ftgmac100 only */
+# define CONFIG_PHY_GIGE /* Enable giga phy support for miiphyutil.c */
+#endif
+#if defined(CONFIG_FTMAC110) || defined(CONFIG_FTGMAC100)
+# define CONFIG_PHY_MAX_ADDR 32 /* Used by Ratbert's ftgmac100 only */
+# define CONFIG_RANDOM_MACADDR
+# define CONFIG_MII
+# define CONFIG_NET_MULTI
+# define CONFIG_NET_RETRY_COUNT 20
+# define CONFIG_DRIVER_ETHER
+# define CONFIG_CMD_MII
+# define CONFIG_CMD_PING
+#endif
+
+/*
+ * NOR Flash
+ */
+#ifdef CONFIG_SYS_FLASH_BASE
+# define CONFIG_SYS_FLASH_CFI
+# define CONFIG_FLASH_CFI_DRIVER
+# define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+# define CONFIG_CMD_IMLS
+# define CONFIG_CMD_FLASH
+#else
+# define CONFIG_SYS_NO_FLASH
+#endif /* !CONFIG_SYS_NO_FLASH */
+
+/*
+ * NAND Flash
+ */
+#ifdef CONFIG_FTNANDC021_BASE
+# define CONFIG_SYS_NAND_SELF_INIT
+# define CONFIG_NAND_FTNANDC021
+# define CONFIG_SYS_NAND_BASE CONFIG_FTNANDC021_BASE
+# define CONFIG_MTD_NAND_VERIFY_WRITE
+# define CONFIG_CMD_NAND
+#endif
+
+/*
+ * MMC/SD
+ */
+#ifdef CONFIG_FTSDC010_BASE
+# define CONFIG_FTSDC010
+# define CONFIG_FTSDC010_SDIO /* The hardware core supports SDIO */
+# define CONFIG_MMC
+# define CONFIG_CMD_MMC
+# define CONFIG_GENERIC_MMC
+#endif
+
+/*
+ * USB EHCI
+ */
+#if defined(CONFIG_SUPP_EHCI_FARADAY) && (CONFIG_USB_MAX_CONTROLLER_COUNT > 0)
+# define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
+# define CONFIG_USB_EHCI
+# define CONFIG_USB_EHCI_FARADAY
+# define CONFIG_EHCI_IS_TDI
+# define CONFIG_CMD_USB
+# define CONFIG_USB_STORAGE
+#endif
+
+/*
+ * USB Gadget
+ */
+#if defined(CONFIG_SUPP_USB_RNDIS) && defined(CONFIG_FOTG210_BASE)
+# define CONFIG_USB_GADGET
+# define CONFIG_USB_GADGET_FOTG210
+# define CONFIG_USB_GADGET_DUALSPEED
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_RNDIS
+# define CONFIG_USBNET_DEV_ADDR "00:41:71:00:00:55" /* U-Boot */
+# define CONFIG_USBNET_HOST_ADDR "00:41:71:00:00:54" /* Host PC */
+#endif
+
+/*
+ * LCD
+ */
+#if defined(CONFIG_SUPP_VGA_CONSOLE) && defined(CONFIG_FTLCDC200_BASE)
+# define CONFIG_FTLCDC200
+# define CONFIG_FTLCDC200_800X480S_TPO
+# define LCD_BPP 4 /* 16-bit per pixel */
+# define CONFIG_LCD
+#endif
+
+/*
+ * U-Boot General Configurations
+ */
+#define CONFIG_LZMA /* Support LZMA */
+#define CONFIG_VERSION_VARIABLE /* Include version env variable */
+#ifndef CONFIG_SYS_LOAD_ADDR /* Default load address */
+# define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_1M)
+#endif
+/* Console Baud-Rate Table */
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+/* Max number of command args */
+#define CONFIG_SYS_MAXARGS 32
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/*
+ * Shell
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ "
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * FAT Filesystem
+ */
+#if defined(CONFIG_USB_STORAGE) || defined(CONFIG_MMC)
+# define CONFIG_DOS_PARTITION
+# define CONFIG_CMD_FAT
+#endif
+
+/*
+ * Linux kernel command line options
+ */
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+
+/*
+ * Default Commands
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMD_AUTOSCRIPT /* support autoscript */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_ENV /* printenv */
+#define CONFIG_CMD_MEMORY /* md mm nm mw ... */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_ELF /* support ELF files */
+#ifndef CONFIG_ENV_IS_NOWHERE
+# define CONFIG_CMD_SAVEENV /* saveenv */
+#endif
+
+#endif
diff --git a/include/faraday/ftsmc020.h b/include/faraday/ftsmc020.h
index 59c6f8e..aa02717 100644
--- a/include/faraday/ftsmc020.h
+++ b/include/faraday/ftsmc020.h
@@ -82,5 +82,6 @@ void ftsmc020_init(void);
#define FTSMC020_TPR_WTC(x) (((x) & 0x3) << 6)
#define FTSMC020_TPR_AHT(x) (((x) & 0x3) << 4)
#define FTSMC020_TPR_TRNA(x) (((x) & 0xf) << 0)
+#define FTSMC020_TPR_WORST 0x0f1ff3ff /* worst but safe */
#endif /* __FTSMC020_H */
--
1.7.9.5
More information about the U-Boot
mailing list