[U-Boot] [PATCH] OMAP5: USB_EHCI: Enable ehci support for omap5
Dan Murphy
dmurphy at ti.com
Mon Jul 8 22:59:32 CEST 2013
From: "Govindraj.R" <govindraj.raja at ti.com>
* Enable all usb ehci related clocks.
* Add ehci support to omap5 board file and arch specific
sysc reg mask values.
* Enable config options for usb support and ethernet support
Signed-off-by: Govindraj.R <govindraj.raja at ti.com>
---
arch/arm/cpu/armv7/omap5/clocks.c | 20 +++++++++++---
arch/arm/include/asm/arch-omap5/clocks.h | 6 ++++
arch/arm/include/asm/arch-omap5/ehci.h | 44 ++++++++++++++++++++++++++++++
board/ti/omap5_evm/evm.c | 33 ++++++++++++++++++++++
include/configs/omap5_evm5430.h | 23 ++++++++++++++--
5 files changed, 120 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/include/asm/arch-omap5/ehci.h
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
index 7e69d2b..f914b60 100644
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -375,6 +375,8 @@ void enable_basic_clocks(void)
&prcm->cm_l4per_gpio4_clkctrl,
&prcm->cm_l4per_gpio5_clkctrl,
&prcm->cm_l4per_gpio6_clkctrl,
+ &prcm->cm_clksel_usb_60mhz,
+ &prcm->cm_l3init_hsusbtll_clkctrl,
0
};
@@ -385,6 +387,7 @@ void enable_basic_clocks(void)
&prcm->cm_wkup_wdtimer2_clkctrl,
&prcm->cm_l4per_uart3_clkctrl,
&prcm->cm_l4per_i2c1_clkctrl,
+ &prcm->cm_l3init_hsusbhost_clkctrl,
0
};
@@ -408,10 +411,13 @@ void enable_basic_clocks(void)
setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
GPTIMER1_CLKCTRL_CLKSEL_MASK);
- do_enable_clocks(clk_domains_essential,
- clk_modules_hw_auto_essential,
- clk_modules_explicit_en_essential,
- 1);
+ /* Enbale all 3 usb ports enable uhh, utmi and hsic clocks*/
+ setbits_le32(&prcm->cm_l3init_hsusbhost_clkctrl,
+ USB_HOST_HS_CLKCTRL_MASK);
+
+ /* Enbale all 3 usb host ports tll clocks*/
+ setbits_le32(&prcm->cm_l3init_hsusbtll_clkctrl,
+ USB_TLL_HS_CLKCTRL_MASK);
/* Select 384Mhz for GPU as its the POR for ES1.0 */
setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
@@ -429,6 +435,12 @@ void enable_basic_clocks(void)
setbits_le32(&prcm->cm_coreaon_bandgap_clkctrl,
((OMAP_TS_CLK_ENABLE_MASK | OMAP_19M_TS_CLK_DIVIDER_MASK)
& ~OMAP_38M_TS_CLK_DIVIDER_MASK));
+
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+
}
void enable_basic_uboot_clocks(void)
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index c944f35..43fc5b8 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -613,6 +613,12 @@ struct omap5_prcm_regs {
/* CM_L3INIT_USBPHY_CLKCTRL */
#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8
+/* CM_L3INIT_USB_HOST_HS_CLKCTRL */
+#define USB_HOST_HS_CLKCTRL_MASK 0xFFC0
+
+/* CM_L3INIT_USB_TLL_HS_CLKCTRL */
+#define USB_TLL_HS_CLKCTRL_MASK 0x700
+
/* CM_MPU_MPU_CLKCTRL */
#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h
new file mode 100644
index 0000000..49197f2
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/ehci.h
@@ -0,0 +1,44 @@
+/*
+ * OMAP EHCI port support
+ * Based on LINUX KERNEL
+ * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
+ * Author: Govindraj R <govindraj.raja at ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _EHCI_H
+#define _EHCI_H
+
+#define OMAP_EHCI_BASE (OMAP54XX_L4_CORE_BASE + 0x64C00)
+#define OMAP_UHH_BASE (OMAP54XX_L4_CORE_BASE + 0x64000)
+#define OMAP_USBTLL_BASE (OMAP54XX_L4_CORE_BASE + 0x62000)
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1
+
+#define OMAP_UHH_SYSCONFIG_SOFTRESET 1
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4)
+
+#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \
+ OMAP_UHH_SYSCONFIG_NOSTDBY)
+
+#endif /* _EHCI_H */
diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c
index 7b426d9..30fcd95 100644
--- a/board/ti/omap5_evm/evm.c
+++ b/board/ti/omap5_evm/evm.c
@@ -29,6 +29,12 @@
#include "mux_data.h"
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
const struct omap_sysinfo sysinfo = {
@@ -107,3 +113,30 @@ int board_mmc_init(bd_t *bis)
}
#endif
#endif
+
+#ifdef CONFIG_USB_EHCI
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
+ .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
+};
+
+int ehci_hcd_init(void)
+{
+ int ret;
+
+ ret = omap_ehci_hcd_init(&usbhs_bdata);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+ int ret;
+
+ ret = omap_ehci_hcd_stop();
+ return ret;
+}
+#endif
diff --git a/include/configs/omap5_evm5430.h b/include/configs/omap5_evm5430.h
index 3145e53..e81c560 100644
--- a/include/configs/omap5_evm5430.h
+++ b/include/configs/omap5_evm5430.h
@@ -128,6 +128,27 @@
/* Flash */
#define CONFIG_SYS_NO_FLASH 1
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 172
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 173
+
+/* Enabled commands */
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_DHCP /* DHCP Support */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
/* commands to include */
#include <config_cmd_default.h>
@@ -139,8 +160,6 @@
#define CONFIG_CMD_SAVEENV
/* Disabled commands */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_IMLS /* List all found images */
--
1.7.9.5
More information about the U-Boot
mailing list