[U-Boot] [PATCH 11/17] usb: mv_udc: Properly align the endpoint QH and qTD list

[Marek Vasut]

The endpoint QH list has to be aligned to 10-bit boundary. We also have
to make sure the list is aligned on a cacheline boundary. Make sure it
is. Furthermore, check if the memory allocation for the QH list didn't
fail. Moveover, improve the comment about the QH list structure.

Finally, the qTD item list has to be aligned only to 5-bit boundary, not
10-bit as it is now, fix this as well.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Lei Wen <leiwen at marvell.com>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Stefano Babic <sbabic at denx.de>
---
 drivers/usb/gadget/mv_udc.c |   26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/mv_udc.c b/drivers/usb/gadget/mv_udc.c
index 422d0a9..394af6b 100644
--- a/drivers/usb/gadget/mv_udc.c
+++ b/drivers/usb/gadget/mv_udc.c
@@ -59,8 +59,6 @@ static const char *reqname(unsigned r)
 }
 #endif
 
-#define PAGE_SIZE	4096
-
 static struct usb_endpoint_descriptor ep0_out_desc = {
 	.bLength = sizeof(struct usb_endpoint_descriptor),
 	.bDescriptorType = USB_DT_ENDPOINT,
@@ -440,15 +438,27 @@ static int mvudc_probe(void)
 {
 	struct ept_queue_head *head;
 	int i;
+
 	const int num = 2 * NUM_ENDPOINTS;
 
-	controller.epts = memalign(PAGE_SIZE,
-				   num * sizeof(struct ept_queue_head));
-	memset(controller.epts, 0, num * sizeof(struct ept_queue_head));
+	const int eplist_min_align = 4096;
+	const int eplist_align = roundup(eplist_min_align, ARCH_DMA_MINALIGN);
+	const int eplist_raw_sz = num * sizeof(struct ept_queue_head);
+	const int eplist_sz = roundup(eplist_raw_sz, ARCH_DMA_MINALIGN);
+
+	/* The QH list must be aligned to 4096 bytes. */
+	controller.epts = memalign(eplist_align, eplist_sz);
+	if (!controller.epts)
+		return -ENOMEM;
+	memset(controller.epts, 0, eplist_sz);
+
 	for (i = 0; i < 2 * NUM_ENDPOINTS; i++) {
 		/*
-		 * For item0 and item1, they are served as ep0
-		 * out&in seperately
+		 * Configure QH for each endpoint. The structure of the QH list
+		 * is such that each two subsequent fields, N and N+1 where N is
+		 * even, in the QH list represent QH for one endpoint. The Nth
+		 * entry represents OUT configuration and the N+1th entry does
+		 * represent IN configuration of the endpoint.
 		 */
 		head = controller.epts + i;
 		if (i < 2)
@@ -460,7 +470,7 @@ static int mvudc_probe(void)
 		head->next = TERMINATE;
 		head->info = 0;
 
-		controller.items[i] = memalign(PAGE_SIZE,
+		controller.items[i] = memalign(roundup(32, ARCH_DMA_MINALIGN),
 					       sizeof(struct ept_queue_item));
 	}
 
-- 
1.7.10.4