[U-Boot] [PATCH V1 1/1] EXYNOS: Resolve the i2c compilation error for

[Amarendra Reddy]

Dear Minkyu,

Please find the response below.

Thanks & Regards
Amarendra Reddy

On 10 July 2013 07:42, Minkyu Kang <mk7.kang at samsung.com> wrote:

> On 09/07/13 23:05, amar_g wrote:
> > This patch resolves the below mentiond compilation error of i2c driver
>
> typo.. maybe mentiond will be mentioned?
> OK will change mentiond to mentioned.
> > for non-FDT case
> >
> > Compilation error:
> > s3c24x0_i2c.c: In function 'board_i2c_init':
> > s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use
> > in this function) s3c24x0_i2c.c:544:18: note: each undeclared
> > identifier is reported only once for each function it appears in
> > s3c24x0_i2c.c:545:3: warning: implicit declaration of function
> > 'exynos_pinmux_config' [-Wimplicit-function-declaration]
> > s3c24x0_i2c.c:545:25: error: 'PERIPH_ID_I2C0' undeclared (first use in
> > this function) s3c24x0_i2c.c:546:10: error: 'PINMUX_FLAG_NONE'
> > undeclared (first use in this function) make[1]: ***
> > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/s3c24x0_i2c.o]
> > Error 1 make: ***
> > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/libi2c.o] Error 2
> >
> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> > Signed-off-by: Amar <amarendra.xt at samsung.com>
> > ---
> >  board/samsung/smdk5250/smdk5250.c |   10 ++++++++++
> >  drivers/i2c/s3c24x0_i2c.c         |    9 +--------
> >  2 files changed, 11 insertions(+), 8 deletions(-)
> >
> > diff --git a/board/samsung/smdk5250/smdk5250.c
> b/board/samsung/smdk5250/smdk5250.c
> > index ae1f077..f1d3d97 100644
> > --- a/board/samsung/smdk5250/smdk5250.c
> > +++ b/board/samsung/smdk5250/smdk5250.c
> > @@ -332,6 +332,16 @@ static int board_uart_init(void)
> >       return ret;
> >  }
> >
> > +void board_i2c_init(const void *blob)
> > +{
> > +     int i;
> > +
> > +     for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
> > +             exynos_pinmux_config((PERIPH_ID_I2C0 + i),
> > +                                  PINMUX_FLAG_NONE);
> > +     }
> > +}
> > +
> >  #ifdef CONFIG_BOARD_EARLY_INIT_F
> >  int board_early_init_f(void)
> >  {
> > diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
> > index 3fc1c5b..382e4c2 100644
> > --- a/drivers/i2c/s3c24x0_i2c.c
> > +++ b/drivers/i2c/s3c24x0_i2c.c
> > @@ -515,10 +515,10 @@ int i2c_write(uchar chip, uint addr, int alen,
> uchar *buffer, int len)
> >                len) != 0);
> >  }
> >
> > +#ifdef CONFIG_OF_CONTROL
> >  void board_i2c_init(const void *blob)
> >  {
> >       int i;
> > -#ifdef CONFIG_OF_CONTROL
> >       int node_list[CONFIG_MAX_I2C_NUM];
> >       int count;
> >
> > @@ -540,15 +540,8 @@ void board_i2c_init(const void *blob)
> >               bus->bus_num = i2c_busses++;
> >               exynos_pinmux_config(bus->id, 0);
> >       }
> > -#else
> > -     for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
> > -             exynos_pinmux_config((PERIPH_ID_I2C0 + i),
> > -                                  PINMUX_FLAG_NONE);
> > -     }
> > -#endif
> >  }
> >
> > -#ifdef CONFIG_OF_CONTROL
> >  static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
> >  {
> >       if (bus_idx < i2c_busses)
> >
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>