[U-Boot] [PATCH 1/7] omap5: add qspi support

[Sourav Poddar]

From: Matt Porter <mporter at ti.com>

Add QSPI definitions and clock configuration support.

Signed-off-by: Matt Porter <mporter at ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
---
 arch/arm/cpu/armv7/omap5/hw_data.c     |    7 ++++++-
 arch/arm/cpu/armv7/omap5/prcm-regs.c   |    1 +
 arch/arm/include/asm/arch-omap5/omap.h |    3 +++
 arch/arm/include/asm/arch-omap5/spl.h  |    1 +
 arch/arm/include/asm/omap_common.h     |    1 +
 5 files changed, 12 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 9374c6a..046ce44 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -186,7 +186,7 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
 
 static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
 	{32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
-	{96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 20 MHz   */
+	{96, 4, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 20 MHz   */
 	{160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
 	{20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
 	{192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
@@ -423,6 +423,7 @@ void enable_basic_clocks(void)
 		(*prcm)->cm_wkup_wdtimer2_clkctrl,
 		(*prcm)->cm_l4per_uart3_clkctrl,
 		(*prcm)->cm_l4per_i2c1_clkctrl,
+		(*prcm)->cm_l4per_qspi_clkctrl,
 		0
 	};
 
@@ -451,6 +452,10 @@ void enable_basic_clocks(void)
 			 clk_modules_explicit_en_essential,
 			 1);
 
+#ifdef CONFIG_TI_QSPI
+	setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
+#endif
+
 	/* Enable SCRM OPT clocks for PER and CORE dpll */
 	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
 			OPTFCLKEN_SCRM_PER_MASK);
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 331117c..debc56b 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -926,6 +926,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_l4per_gpio8_clkctrl			= 0x4a009818,
 	.cm_l4per_mmcsd3_clkctrl		= 0x4a009820,
 	.cm_l4per_mmcsd4_clkctrl		= 0x4a009828,
+	.cm_l4per_qspi_clkctrl			= 0x4a009838,
 	.cm_l4per_uart1_clkctrl			= 0x4a009840,
 	.cm_l4per_uart2_clkctrl			= 0x4a009848,
 	.cm_l4per_uart3_clkctrl			= 0x4a009850,
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index e7d79fc..d2c4930 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -67,6 +67,9 @@
 /* GPMC */
 #define OMAP54XX_GPMC_BASE	0x50000000
 
+/* QSPI */
+#define QSPI_BASE		0x4B300000
+
 /*
  * Hardware Register Details
  */
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
index d4d353c..8905cb8 100644
--- a/arch/arm/include/asm/arch-omap5/spl.h
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -31,6 +31,7 @@
 #define BOOT_DEVICE_MMC1        5
 #define BOOT_DEVICE_MMC2        6
 #define BOOT_DEVICE_MMC2_2	7
+#define BOOT_DEVICE_SPI		10
 
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index fa28358..c8d4619 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -279,6 +279,7 @@ struct prcm_regs {
 	u32 cm_l4per_mmcsd4_clkctrl;
 	u32 cm_l4per_msprohg_clkctrl;
 	u32 cm_l4per_slimbus2_clkctrl;
+	u32 cm_l4per_qspi_clkctrl;
 	u32 cm_l4per_uart1_clkctrl;
 	u32 cm_l4per_uart2_clkctrl;
 	u32 cm_l4per_uart3_clkctrl;
-- 
1.7.1