[U-Boot] [PATCH 2/7] spi: add TI QSPI driver

Sourav Poddar sourav.poddar at ti.com
Wed Jul 10 13:25:36 CEST 2013


From: Matt Porter <mporter at ti.com>

Adds a SPI master driver for the TI QSPI peripheral.

Signed-off-by: Matt Porter <mporter at ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
---
 drivers/spi/Makefile  |    1 +
 drivers/spi/ti_qspi.c |  262 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 263 insertions(+), 0 deletions(-)
 create mode 100644 drivers/spi/ti_qspi.c

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d08609e..f51033d 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -54,6 +54,7 @@ COBJS-$(CONFIG_FDT_SPI) += fdt_spi.o
 COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
 COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
 COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
+COBJS-$(CONFIG_TI_QSPI) += ti_qspi.o
 COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
new file mode 100644
index 0000000..1973b85
--- /dev/null
+++ b/drivers/spi/ti_qspi.c
@@ -0,0 +1,262 @@
+/*
+ * TI QSPI driver
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/omap.h>
+#include <malloc.h>
+#include <spi.h>
+
+struct qspi_slave {
+	struct spi_slave slave;
+	unsigned int mode;
+	u32 cmd;
+	u32 dc;
+};
+
+#define to_qspi_slave(s) container_of(s, struct qspi_slave, slave)
+
+struct qspi_regs {
+	u32 pid;
+	u32 pad0[3];
+	u32 sysconfig;
+	u32 pad1[3];
+	u32 intr_status_raw_set;
+	u32 intr_status_enabled_clear;
+	u32 intr_enable_set;
+	u32 intr_enable_clear;
+	u32 intc_eoi;
+	u32 pad2[3];
+	u32 spi_clock_cntrl;
+	u32 spi_dc;
+	u32 spi_cmd;
+	u32 spi_status;
+	u32 spi_data;
+	u32 spi_setup0;
+	u32 spi_setup1;
+	u32 spi_setup2;
+	u32 spi_setup3;
+	u32 spi_switch;
+	u32 spi_data1;
+	u32 spi_data2;
+	u32 spi_data3;
+};
+
+static struct qspi_regs *qspi = (struct qspi_regs *)QSPI_BASE;
+
+#define QSPI_TIMEOUT			2000000
+
+#define QSPI_FCLK			192000000
+
+/* Clock Control */
+#define QSPI_CLK_EN			(1 << 31)
+#define QSPI_CLK_DIV_MAX		0xffff
+
+/* Command */
+#define QSPI_EN_CS(n)			(n << 28)
+#define QSPI_WLEN(n)			((n-1) << 19)
+#define QSPI_3_PIN			(1 << 18)
+#define QSPI_RD_SNGL			(1 << 16)
+#define QSPI_WR_SNGL			(2 << 16)
+#define QSPI_INVAL			(4 << 16)
+
+/* Device Control */
+#define QSPI_DD(m, n)			(m << (3 + n*8))
+#define QSPI_CKPHA(n)			(1 << (2 + n*8))
+#define QSPI_CSPOL(n)			(1 << (1 + n*8))
+#define QSPI_CKPOL(n)			(1 << (n*8))
+
+/* Status */
+#define QSPI_WC				(1 << 1)
+#define QSPI_BUSY			(1 << 0)
+#define QSPI_WC_BUSY			(QSPI_WC | QSPI_BUSY)
+#define QSPI_XFER_DONE			QSPI_WC
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	/* CS handled in xfer */
+	return;
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	/* CS handled in xfer */
+	return;
+}
+
+void spi_init(void)
+{
+	/* nothing to do */
+}
+
+void spi_set_speed(struct spi_slave *slave, uint hz)
+{
+	uint clk_div;
+
+	if (!hz)
+		clk_div = 0;
+	else
+		clk_div = (QSPI_FCLK / hz) - 1;
+
+	debug("%s: hz: %d, clock divider %d\n", __func__, hz, clk_div);
+
+	/* disable SCLK */
+	writel(readl(&qspi->spi_clock_cntrl) & ~QSPI_CLK_EN, &qspi->spi_clock_cntrl);
+
+	if (clk_div < 0) {
+		debug("%s: clock divider < 0, using /1 divider\n", __func__);
+		clk_div = 0;
+	}
+
+	if (clk_div > QSPI_CLK_DIV_MAX) {
+		debug("%s: clock divider >%d , using /%d divider\n",
+			__func__, QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1);
+		clk_div = QSPI_CLK_DIV_MAX;
+	}
+
+	/* enable SCLK */
+	writel(QSPI_CLK_EN | clk_div, &qspi->spi_clock_cntrl);
+	debug("%s: spi_clock_cntrl %08x\n", __func__, readl(&qspi->spi_clock_cntrl));
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+				  unsigned int max_hz, unsigned int mode)
+{
+	struct qspi_slave *qslave;
+
+	qslave = spi_alloc_slave(struct qspi_slave, bus, cs);
+	if (!qslave)
+		return NULL;
+
+	spi_set_speed(&qslave->slave, max_hz);
+	qslave->mode = mode;
+	debug("%s: bus:%i cs:%i mode:%i\n", __func__, bus, cs, mode);
+
+	return &qslave->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	struct qspi_slave *qslave = to_qspi_slave(slave);
+	free(qslave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+
+	writel(0, &qspi->spi_dc);
+	writel(0, &qspi->spi_cmd);
+	writel(0, &qspi->spi_data);
+
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+
+	writel(0, &qspi->spi_dc);
+	writel(0, &qspi->spi_cmd);
+	writel(0, &qspi->spi_data);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+	     void *din, unsigned long flags)
+{
+	struct qspi_slave *qslave = to_qspi_slave(slave);
+	uint words = bitlen >> 3; /* fixed 8-bit word length */
+	const uchar *txp = dout;
+	uchar *rxp = din;
+	uint status;
+	int timeout;
+
+	debug("%s: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n", __func__,
+		slave->bus, slave->cs, bitlen, words, flags);
+	if (bitlen == 0)
+		return -1;
+
+	if (bitlen % 8) {
+		flags |= SPI_XFER_END;
+		return -1;
+	}
+
+	/* setup command reg */
+	qslave->cmd = 0;
+	qslave->cmd |= QSPI_WLEN(8);
+	qslave->cmd |= QSPI_EN_CS(slave->cs);
+	if (flags & SPI_3WIRE)
+		qslave->cmd |= QSPI_3_PIN;
+	qslave->cmd |= 0xfff;
+
+	/* setup device control reg */
+	qslave->dc = 0;
+	if (qslave->mode & SPI_CPHA)
+		qslave->dc |= QSPI_CKPHA(slave->cs);
+	if (qslave->mode & SPI_CPOL)
+		qslave->dc |= QSPI_CKPOL(slave->cs);
+	if (qslave->mode & SPI_CS_HIGH)
+		qslave->dc |= QSPI_CSPOL(slave->cs);
+
+	while (words--) {
+		if (txp) {
+			debug("tx cmd %08x dc %08x data %02x\n",
+			      qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp);
+			writel(*txp++, &qspi->spi_data);
+			writel(qslave->dc, &qspi->spi_dc);
+			writel(qslave->cmd | QSPI_WR_SNGL, &qspi->spi_cmd);
+			status = readl(&qspi->spi_status);
+			timeout = QSPI_TIMEOUT;
+			while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
+				if (--timeout < 0) {
+					printf("QSPI tx timed out\n");
+					return -1;
+				}
+				status = readl(&qspi->spi_status);
+			}
+			debug("tx done, status %08x\n", status);
+		}
+		if (rxp) {
+			debug("rx cmd %08x dc %08x\n",
+			      qslave->cmd | QSPI_RD_SNGL, qslave->dc);
+			writel(qslave->dc, &qspi->spi_dc);
+			writel(qslave->cmd | QSPI_RD_SNGL, &qspi->spi_cmd);
+			status = readl(&qspi->spi_status);
+			timeout = QSPI_TIMEOUT;
+			while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
+				if (--timeout < 0) {
+					printf("QSPI rx timed out\n");
+					return -1;
+				}
+				status = readl(&qspi->spi_status);
+			}
+			*rxp++ = readl(&qspi->spi_data);
+			debug("rx done, status %08x, read %02x\n",
+			      status, *(rxp-1));
+		}
+	}
+
+	/* Terminate frame */
+	if (flags & SPI_XFER_END)
+		writel(qslave->cmd | QSPI_INVAL, &qspi->spi_cmd);
+
+	return 0;
+}
-- 
1.7.1



More information about the U-Boot mailing list