[U-Boot] [PATCH 3/7] dra7xx_evm: add SPL API, QSPI, and serial flash support
Nishanth Menon
menon.nishanth at gmail.com
Thu Jul 11 01:58:53 CEST 2013
[...]
>> diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
>> index 338a241..2441c55 100644
>> --- a/board/ti/dra7xx/mux_data.h
>> +++ b/board/ti/dra7xx/mux_data.h
>> @@ -53,5 +53,15 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
>> {UART1_RTSN, (IEN | PTU | PDIS | M3)}, /* UART1_RTSN */
>> {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */
>> {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */
>> + {GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */
>> + {GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */
>> + {GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */
>> + {GPMC_A16, (IEN | PDIS | M1)}, /* QSPI1_D[1] */
>> + {GPMC_A17, (IEN | PDIS | M1)}, /* QSPI1_D[0] */
>> + {GPMC_A18, (IEN | PDIS | M1)}, /* QSPI1_SCLK */
>> + {GPMC_A3, (IEN | PDIS | M1)}, /* QSPI1_CS2 */
>> + {GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */
>> + {GPMC_CS2, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS0 */
>> + {GPMC_CS3, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS1*/
Just a nitpick - Could someone audit this to ensure that only input/full
duplex pins are set to IEN(Input Enable)?
Chip select (CS), SCLK, RTCLK dont seem to be candidates for input to DRA.
---
Regards,
Nishanth Menon
More information about the U-Boot
mailing list