[U-Boot] [PATCH 1/7] omap5: add qspi support

Sourav Poddar sourav.poddar at ti.com
Thu Jul 11 08:17:30 CEST 2013


On Wednesday 10 July 2013 06:53 PM, Nishanth Menon wrote:
> On Wed, Jul 10, 2013 at 6:25 AM, Sourav Poddar<sourav.poddar at ti.com>  wrote:
>> From: Matt Porter<mporter at ti.com>
>>
>> Add QSPI definitions and clock configuration support.
>>
> OMAP54xx does not have QSPI. DRA7 has QSPI?
>
Yes.
>> Signed-off-by: Matt Porter<mporter at ti.com>
>> Signed-off-by: Sourav Poddar<sourav.poddar at ti.com>
>> ---
>>   arch/arm/cpu/armv7/omap5/hw_data.c     |    7 ++++++-
>>   arch/arm/cpu/armv7/omap5/prcm-regs.c   |    1 +
>>   arch/arm/include/asm/arch-omap5/omap.h |    3 +++
>>   arch/arm/include/asm/arch-omap5/spl.h  |    1 +
>>   arch/arm/include/asm/omap_common.h     |    1 +
>>   5 files changed, 12 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
>> index 9374c6a..046ce44 100644
>> --- a/arch/arm/cpu/armv7/omap5/hw_data.c
>> +++ b/arch/arm/cpu/armv7/omap5/hw_data.c
>> @@ -186,7 +186,7 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
>>
>>   static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
>>          {32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},             /* 12 MHz   */
>> -       {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},             /* 20 MHz   */
>> +       {96, 4, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},              /* 20 MHz   */
> is this a separate fix?
>
Ahh..it can be send as a seperate fix actually. Will change.
>>          {160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},            /* 16.8 MHz */
>>          {20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},             /* 19.2 MHz */
>>          {192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},           /* 26 MHz   */
>> @@ -423,6 +423,7 @@ void enable_basic_clocks(void)
>>                  (*prcm)->cm_wkup_wdtimer2_clkctrl,
>>                  (*prcm)->cm_l4per_uart3_clkctrl,
>>                  (*prcm)->cm_l4per_i2c1_clkctrl,
>> +               (*prcm)->cm_l4per_qspi_clkctrl,
>>                  0
>>          };
>>
>> @@ -451,6 +452,10 @@ void enable_basic_clocks(void)
>>                           clk_modules_explicit_en_essential,
>>                           1);
>>
>> +#ifdef CONFIG_TI_QSPI
>> +       setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
>> +#endif
>> +
>>          /* Enable SCRM OPT clocks for PER and CORE dpll */
>>          setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
>>                          OPTFCLKEN_SCRM_PER_MASK);
>> diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
>> index 331117c..debc56b 100644
>> --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
>> +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
>> @@ -926,6 +926,7 @@ struct prcm_regs const dra7xx_prcm = {
>>          .cm_l4per_gpio8_clkctrl                 = 0x4a009818,
>>          .cm_l4per_mmcsd3_clkctrl                = 0x4a009820,
>>          .cm_l4per_mmcsd4_clkctrl                = 0x4a009828,
>> +       .cm_l4per_qspi_clkctrl                  = 0x4a009838,
>>          .cm_l4per_uart1_clkctrl                 = 0x4a009840,
>>          .cm_l4per_uart2_clkctrl                 = 0x4a009848,
>>          .cm_l4per_uart3_clkctrl                 = 0x4a009850,
>> diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
>> index e7d79fc..d2c4930 100644
>> --- a/arch/arm/include/asm/arch-omap5/omap.h
>> +++ b/arch/arm/include/asm/arch-omap5/omap.h
>> @@ -67,6 +67,9 @@
>>   /* GPMC */
>>   #define OMAP54XX_GPMC_BASE     0x50000000
>>
>> +/* QSPI */
>> +#define QSPI_BASE              0x4B300000
>> +
>>   /*
>>    * Hardware Register Details
>>    */
>> diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
>> index d4d353c..8905cb8 100644
>> --- a/arch/arm/include/asm/arch-omap5/spl.h
>> +++ b/arch/arm/include/asm/arch-omap5/spl.h
>> @@ -31,6 +31,7 @@
>>   #define BOOT_DEVICE_MMC1        5
>>   #define BOOT_DEVICE_MMC2        6
>>   #define BOOT_DEVICE_MMC2_2     7
>> +#define BOOT_DEVICE_SPI                10
> why not 8?
>
>>   #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
>>   #define MMC_BOOT_DEVICES_END   BOOT_DEVICE_MMC2_2
>> diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
>> index fa28358..c8d4619 100644
>> --- a/arch/arm/include/asm/omap_common.h
>> +++ b/arch/arm/include/asm/omap_common.h
>> @@ -279,6 +279,7 @@ struct prcm_regs {
>>          u32 cm_l4per_mmcsd4_clkctrl;
>>          u32 cm_l4per_msprohg_clkctrl;
>>          u32 cm_l4per_slimbus2_clkctrl;
>> +       u32 cm_l4per_qspi_clkctrl;
>>          u32 cm_l4per_uart1_clkctrl;
>>          u32 cm_l4per_uart2_clkctrl;
>>          u32 cm_l4per_uart3_clkctrl;
>> --
>> 1.7.1
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot



More information about the U-Boot mailing list