[U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information

[Sricharan R]

On Thursday 11 July 2013 01:28 PM, Roger Quadros wrote:
> On 07/11/2013 06:51 AM, Lokesh Vutla wrote:
>> On Thursday 11 July 2013 01:35 AM, Dan Murphy wrote:
>>> * Enable the OMAP5 EHCI host clocks
>>> * Add OMAP5 EHCI register definitions
>>> * Add OMAP5 ES2 host revision
>>>
>>> Signed-off-by: Dan Murphy <dmurphy at ti.com>
>>> ---
>>>  arch/arm/cpu/armv7/omap5/hw_data.c      |   13 ++++++++++
>>>  arch/arm/include/asm/arch-omap5/clock.h |    6 +++++
>>>  arch/arm/include/asm/arch-omap5/ehci.h  |   43 +++++++++++++++++++++++++++++++
>>>  arch/arm/include/asm/ehci-omap.h        |    1 +
>>>  drivers/usb/host/ehci-omap.c            |    2 +-
>>>  5 files changed, 64 insertions(+), 1 deletion(-)
>>>  create mode 100644 arch/arm/include/asm/arch-omap5/ehci.h
>>>
>>> diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
>>> index 56cf1f8..055f058 100644
>>> --- a/arch/arm/cpu/armv7/omap5/hw_data.c
>>> +++ b/arch/arm/cpu/armv7/omap5/hw_data.c
>>> @@ -412,6 +412,8 @@ void enable_basic_clocks(void)
>>>  		(*prcm)->cm_l4per_gpio4_clkctrl,
>>>  		(*prcm)->cm_l4per_gpio5_clkctrl,
>>>  		(*prcm)->cm_l4per_gpio6_clkctrl,
>>> +		(*prcm)->cm_clksel_usb_60mhz,
>>> +		(*prcm)->cm_l3init_hsusbtll_clkctrl,
>> guard this with CONFIG_USB_EHCI please or it ll
>> throw an error for DRA7xx boards.
> why is DRA7xx using omap5/hw_data.c?
>
> doesn't it qualify for its own SoC directory?
 We tried to keep common things for OMAP5/DRA intact and
 added the difference. The above clocks list was same for both.
 In fact there is no armv7/dra directory at all.

Regards,
 Sricharan
>>>  		0
>>>  	};
> cheers,
> -roger