[U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support

Nishanth Menon nm at ti.com
Thu Jul 11 23:52:38 CEST 2013


For folks not using concatenated device tree with uImage, having
an handy function to find and load device tree is very handy.

So introduce findfdt and loadfdt and run findfdt by default to make
it easier on user scripts.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
 include/configs/omap3_beagle.h |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index bdeee17..7833208 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -210,6 +210,8 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
 	"rdaddr=0x81000000\0" \
+	"fdt_high=0xffffffff\0" \
+	"fdtaddr=0x80f80000\0" \
 	"usbtty=cdc_acm\0" \
 	"bootfile=uImage\0" \
 	"ramdisk=ramdisk.gz\0" \
@@ -250,6 +252,19 @@
 		"omapdss.def_disp=${defaultdisplay} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
+	"findfdt=" \
+		"if test $beaglerev = AxBx; then " \
+			"setenv fdtfile omap3-beagle.dtb; fi; " \
+		"if test $beaglerev = Cx; then " \
+			"setenv fdtfile omap3-beagle.dtb; fi; " \
+		"if test $beaglerev = xMA; then " \
+			"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
+		"if test $beaglerev = xMB; then " \
+			"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
+		"if test $beaglerev = xMC; then " \
+			"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
+		"if test $fdtfile = undefined; then " \
+			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"bootenv=uEnv.txt\0" \
 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 	"importbootenv=echo Importing environment from mmc ...; " \
@@ -265,6 +280,7 @@
 		"rootfstype=${ramrootfstype}\0" \
 	"loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -281,6 +297,7 @@
 	"userbutton_nonxm=gpio input 7;\0"
 /* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
 #define CONFIG_BOOTCOMMAND \
+	"run findfdt; " \
 	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run userbutton; then " \
 			"setenv bootenv uEnv.txt;" \
-- 
1.7.9.5



More information about the U-Boot mailing list