[U-Boot] [PATCH V2 0/6] omap3_beagle: configs: improve BOOT_CMD options

[Nishanth Menon]

With the latest transition to device tree, there is a need to simplify
the load of device tree depending on board type etc. While at it, simplify
few other changes as well.

Testing:
with a uEnv.txt as:
bootdir=/
bootpart=0:1

The following were the boot results:
Beagle (rev C1D): http://pastebin.com/fMdsKkgr
Beagle XM (rev C1): http://pastebin.com/p1zp9AhG


Changes in V2 since v1:
	- removed xMB version support based on review comments.
		http://marc.info/?t=137357970500004&r=1&w=2&n=5

V1: http://marc.info/?l=u-boot&m=137357963227510&w=2

Nishanth Menon (6):
  omap3_beagle: remove JFFS2 support.
  omap3_beagle: replace uImage.beagle with generic uImage
  beagleboard: remove RevB support for BeagleBoard Xm
  omap3_beagle: enable CMD_FS_GENERIC and simplify load of
    image/ramdisk
  omap3_beagle: support findfdt and loadfdt for devicetree support
  omap3_beagle: support booting from zImage and device tree as last
    option

 board/ti/beagle/beagle.c       |   28 ++++++------------------
 board/ti/beagle/beagle.h       |    3 +--
 include/configs/omap3_beagle.h |   46 ++++++++++++++++++++++++++++------------
 3 files changed, 41 insertions(+), 36 deletions(-)

Regards,
Nishanth Menon
-- 
1.7.9.5