[U-Boot] U-boot timeout with KSZ8021 phy

[Alexandre Pereira da Silva]

On Thu, Jul 11, 2013 at 5:36 PM, Marek Vasut <marex at denx.de> wrote:
> Dear Alexandre Pereira da Silva,
>
>> On Thu, Jul 11, 2013 at 4:55 PM, Marek Vasut <marex at denx.de> wrote:
>
> Make sure to check the direction too, it can go either from phy to fec or the
> other way IIRC.

Ok, it seems this was caused by a bad tftp server and not by the board itself.

I can confirm KSZ8021 is functional, after defining CONFIG_PHYLIB to mx28evk.h

Thanks